Optional Equipment

1.

The Booklet Trimmer-F1 and Two-Knife Booklet Trimmer-A1 trim the fore edge and top/bottom of saddle stitched copies for neat output.

2.

The Booklet Finisher-W1 PRO is equipped with the following features: Collate, Group, Staple (Corner, Double, and Saddle Stitch), and Saddle Fold.

3.

The Staple-P1 can be attached to the Booklet Finisher-W1 PRO for saddle stitching.

4.

If the Paper Folding Unit-J1 is attached to the Staple Finisher-W1 PRO or Booklet Finisher-W1 PRO, the paper can be folded in 5 different ways (Z-Fold, Half Fold, C-Fold, Accordion Z-Fold, and Double Parallel Fold).

5.

The High Capacity Stacker-H1 enables you to continuously stack a large amount of paper.

6.

The Perfect Binder-E1 is equipped with the following features: book binding, gluing, trimming, and stacking.

7.

The Multi Function Professional Puncher-A1 punches several types of hole. For more information on the Multi Function Professional Puncher-A1, see the instruction manual of the Multi Function Professional Puncher-A1.

8.

If the Document Insertion Unit-N1 is attached, a different type of paper from the body of the document can be inserted for a cover or insert.

9.

Originals placed in the feeder are automatically fed sheet by sheet to the platen glass for scanning. You can scan documents such as books, thick originals, thin originals, and transparencies on the platen glass of the Duplex Color Image Reader Unit-K1.

10.

The Copy Card Reader-F1 enables Department ID Management to be performed through the use of cards.

11.

The Upright Control Panel-G1 includes the keys, touch panel display, and indicators required for operating the machine. (See "Control Panel Parts and Functions.")

12.

If the Multi-drawer Paper Deck-C1 is attached, it can provide three additional paper sources. Up to 2,000 sheets of paper (20 lb bond (80 g/m2)) each can be loaded into the upper, middle, and lower decks of the Multi-drawer Paper Deck-C1.

13.

If the POD Deck Lite-C1 is attached, it can provide an additional paper source. The POD Deck Lite-C1 holds up to 3,500 sheets of paper (20 lb bond (80 g/m2)).

14.

Attach the Envelope Feeder Attachment-G1 to load envelopes into the POD Deck Lite-C1.

15.

The POD Deck Lite Attachment Kit-B1 is required to attach the POD Deck Lite-C1 to the machine.

16.

Instead of the Duplex Color Image Reader Unit-K1, you can attach the Printer Cover-H1.

17.

The Copy Tray-R2 is equipped with the following features: Collate, Group, and Rotate 90 Degrees.

18.

Use the Stack Bypass-B1 to feed paper manually.

19.

Long sheet paper can be used.

20.

The Stack Bypass Alignment Tray-C2 aligns paper placed on the Stack Bypass-B1.

21.

Attach the Envelope Feeder Attachment-F1 to load envelopes into the paper drawers of this machine.

22.

Attach the Tab Feeding Attachment-F1 to load tab paper into the paper drawers of this machine.

23.

Store the glass cleaning cloth in this box.

24.

The External 2/3 Hole Puncher-C1 is equipped with the Hole Punch mode. The External 2/3 Hole Puncher-C1 can be attached only if the Staple Finisher-T1 or Booklet Finisher-T1 is attached.

25.

The Booklet Finisher-T1 is equipped with the following features: Collate, Group, and Staple (Corner, Double, and Saddle Stitch), and Saddle Fold.

26.

The Staple Cartridge-D2/Staple Cartridge-D3 can be attached to the Booklet Finisher-T1 for saddle stitching.

27.

The Staple-J1 can be attached to the Staple Finisher-T1 or Booklet Finisher-T1 for stapling (Corner and Double).

28.

The Staple Finisher-T1 is equipped with the following features: Collate, Group, and Staple (Corner and Double).

29.

The Staple Finisher-W1 PRO is equipped with the following features: Collate, Group, and Staple (Corner and Double).

30.

The Staple-N1 can be attached to the Staple Finisher-W1 PRO or Booklet Finisher-W1 PRO for stapling (Corner and Double).

31.

The Puncher Unit-BS1/Puncher Unit-BT1 is equipped with the Hole Punch mode. The Puncher Unit-BS1/Puncher Unit-BT1 can be attached only if the Staple Finisher-W1 PRO or Booklet Finisher-W1 PRO is attached.

32.

The Booklet Trimmer-F1 trims the fore edge of saddle stitched copies for neat output.