Preferences

Preferences: Paper Settings

Item	Setting Description	Default Setting	Can be set in Remote UI	Device Information Delivery Available
[Paper Settings] "Registering the Paper Size and Type for a Paper Source"	Select the paper source: Set Thin 2 (52-63 g/m2), Thin 1 (64-79 g/m2), Plain 1 (80-90 g/m2), Plain 2 (91-105 g/m2), Heavy 1 (106-128 g/m2), Heavy 2 (129-150 g/m2), Heavy 3 (151-180 g/m2), Heavy 4 (181-220 g/m2), Heavy 5 (221-256 g/m2), Heavy 6 (257-300 g/m2), Color 1 (64-79 g/m2), Color 2 (80-90 g/m2), Recycled 1 (64-79 g/m2), Recycled 2 (80-90 g/m2), Recycled 3 (91-105 g/m2), Pre-Punched 1 (64-79 g/m2), Pre-Punched 2 (80-90 g/m2), Transparency, Clear Film, Labels, Tab 1 (151-180 g/m2), Tab 2 (181-220 g/m2), Bond 1 (64-79 g/m2), Bond 2 (80-90 g/m2), Bond 3 (91-105 g/m2), Letterhead, 1-Sided Coated 1 (106-128 g/m2), 1-Sided Coated 2 (129-150 g/m2), 1-Sided Coated 3 (151-180 g/m2), 1-Sided Coated 4 (181-220 g/m2), 1-Sided Coated 5 (221-256 g/m2), 1-Sided Coated 6 (257-300 g/m2), 2-Sided Coated 1 (106-128 g/m2), 2-Sided Coated 2 (129-150 g/m2), 2-Sided Coated 3 (151-180 g/m2), 2-Sided Coated 4 (181-220 g/m2), 2-Sided Coated 5 (221-256 g/m2), 2-Sided Coated 6 (257-300 g/m2), Matte Coated 1 (106-128 g/m2), Matte Coated 2 (129-150 g/m2), Matte Coated 3 (151-180 g/m2), Matte Coated 4 (181-220 g/m2), Matte Coated 5 (221-256 g/m2), Matte Coated 6 (257-300 g/m2), Textured 1 (80-90 g/m2), Textured 2 (91-105 g/m2), Textured 3 (106-128 g/m2), Textured 4 (129-150 g/m2), Textured 5 (151-180 g/m2), Textured 6 (181-220 g/m2), Textured 7 (221-256 g/m2), Textured 8 (257-300 g/m2), Vellum 1 (64-79 g/m2), Vellum 2 (80-90 g/m2), Vellum 3 (91-105 g/m2), Envelope, Custom Type	Plain 1 (80-90 g/m2)	Yes	No
	Custom Size	-	No	No
	Envelope Nagagata 3, Yougatanaga 3, Kakugata 2, No. 10 (COM10), ISO-C5, DL, Monarch	No. 10 (COM10)	No	No
[Paper Size Group for Auto Recog. in Drawer] (See "Setting the Paper Size Group for Auto Recognition in the Paper Source.")	Paper Drawer: All Sizes, A/B Size, Inch Size	Inch Size	No	No
	Multi-purpose Tray*1: A/B Size, Inch Size	Inch Size	No	No
[A5R/STMTR Paper Selection] (See "Distinguishing A5R and STMTR Paper.")	A5R, STMTR	STMTR	No	No
[B5/EXEC Paper Selection] (See "Distinguishing B5 and EXEC Paper.")	B5, EXEC	EXEC	No	No
[Paper Type Management Settings] (See "Overview of This Function.")	Details/Edit Name, Category, Basis Weight, Size, Finish, Type, Color, 2nd Side of 2-Sided Page, Adjust Creep Correction, Curl Correction Level, Adj. Ppr Separation Fan Level, Adj. Fan for Paper Convey., Adjust Image Position, Adjust Paper Curve, Adj. Paper Realignment Speed, Correct Image for Scratching, Adjust Lead/Tail Margins, Toner Amount Reduct. Mode, Adj. Secondary Transfer Volt., Adj. Antistatic Bias, Adjust ITB Image Clearing, Adjust Gloss/Fine Black, Change Fold/Stitch Position1, Adj. Saddle Stitch Fold Pos.1, Adjust Saddle Fold Position1, Adjust Hole Punch Position1, Corr. Tail End Toner Applic., Adjust Fixing Speed, Adjust Fixing Pressure, Auto Adj. L/R Edge Alignment, Adj. Primary Transfer Voltage	-	Yes	No
	Duplicate, Delete, Paper Database	-	Yes	No
[Multi-Purpose Tray Defaults]*1 (See "Registering Multi-Purpose Tray Defaults.")	On, Off Register(Paper Size/Paper Type)	Off	No	No
[Register Custom Size] (See "Registering/Editing/Deleting Custom Paper Sizes.")	S1 to S5: Register/Edit, Rename	-	No	Yes
	Delete	-	No	No

*1 Indicates items that appear only when the appropriate optional product is available for use.

Preferences: Display Settings

Item	Setting Description	Default Setting	Can be set in Remote UI	Device Information Delivery Available
[Default Screen after Startup/Restoration] (See "Default Screen after Startup/Restoration.")	Main Menu, Quick Menu, Copy1, Scan and Send, Fax1, Scan and Store1, Access Stored Files, Fax/I-Fax Inbox, Hold, Secure Print, Web Access1, Scanner, Print Server*1, WSD Scan	Main Menu	No	No
	Open Status Monitor/Cancel: On, Off	On	No	No
[Default Screen (Status Monitor/Cancel)] (See "Default Screen (Status Monitor/Cancel).")	Default Status Type: Job, Paper, Toner/Other	Job	No	No
	Status/Log: Job Status, Job Log	Job Status	No	No
	Details (Job, Job Status): Print, Copy*1, Send, Send (Fax), Forward, Store	-	No	No
	Details (Job, Job Log)： Copy*1, Printer, Local Print, Received Job Print, Print Report, Send, Send (Fax), Receive, Store	-	No	No
[Copy Screen Display Settings]*1 (See "Switching the Copy Basic Features Screen.")	Regular Copy, Express Copy	Regular Copy	No	No
[Display Fax Function]*1 (See "Display Fax Function.")	On, Off	On	No	No
	Enable Fax in Scan and Send Function*1: On, Off	On	No	No
[Store Location Display Settings] (See "Store Location Display Settings.")	Mail Box: On, Off	On	No	No
	Memory Media: On, Off	Off	No	No
[Switch Language/Keyboard On/Off] (See "Enabling the Language/Keyboard Switch.")	On, Off	Off	No	No
[Switch Language/Keyboard] (See "Changing the Display Language/Keyboard on the Touch Panel Display.")	Language, Keyboard Layout	-	No	No
[Use Keyboard Shift Lock Feature] (See "Changing the Keyboard Shift Lock Feature Settings.")	On, Off	Off	No	Yes
[Display Remaining Paper Message] (See "Displaying the Remaining Paper Message.")	On, Off	On	No	No
[No. of Copies/Job Duration Status] (See "Number of Copies/Wait Time Status Display.")	On, Off	On	No	No
[Notify to Clean Original Scanning Area] (See "Clean the Original Scanning Area Screen Prompt.")	On, Off	On	No	No
[Change Display of Paper List Screen] (See "Changing the Default Display of Select Paper List Screen .")	W/Illustrations, No Illustrations	W/Illustrations	No	No
[Paper Type Selection Screen Priority] (See "Setting the Default Display of the Paper Type Selection Screen.")	Simple, Detailed	Detailed	No	No
[Change Default Display for Paper Type List] (See "Changing Default Display for Paper Type List.")	Category: All, Standard Type, Custom Type	All	No	No
	Sort: Reg'd (Asc.), Reg'd (Desc.), Name (Asc.), Name (Desc.), Weight (Asc.), Weight (Desc.)	Reg'd (Desc.)	No	No
[Switch Millimeter/Inch Entry] (See "mm/Inch Entry Switch.")	mm, Inch	Inch	No	Yes
[ID/User Name Display On/Off] (See "Displaying the Current Department ID/User Name.")	On, Off	On	No	No
[Display Remaining Toner Error Message] (See "Displaying the Remaining Toner Error Message.")	On, Off	Off	No	No
[Delete Remaining Toner Error] (See "Deleting the Remaining Toner Error Message.")	Yes, No	-	No	No
[Edit Puncher Unit Die Name]*1 (See "Changing the Puncher Die Name.")	Edit	-	Yes	No

*1	Indicates items that appear only when the appropriate optional product is available for use.

Preferences: Timer/Energy Settings

Item	Setting Description	Default Setting	Can be set in Remote UI	Device Information Delivery Available
[Adjust Time] (See "Current Time Adjustment.")	00:00 to 23:59, in one minute increments	-	No	No
[Date/Time Settings] (See "Current Date and Time.")	Date and Time Setting (12 digit number)	-	Yes	No
	Time Zone: GMT-12:00 to GMT+12:00	GMT -05:00	Yes	No
	Daylight Saving Time: On, Off	Off	Yes	No
	Start Date (Month/Day/Time (0 to 23))	March, 2nd, Sunday, 2:00	Yes	No
	End Date (Month/Day/Time (0 to 23))	November, 1st, Sunday, 2:00	Yes	No
[Time Format] (See "Time Format.")	24 Hour, 12 Hour	12 Hour	Yes	No
[Quick Startup Settings for Main Power] (See "Quick Startup Settings.")	On, Off	Off	Yes	Yes
[Auto Reset Time] (See "Auto Reset Time.")	0 min=Off, 10 to 50 seconds in 10 second increments, 1 to 9 minutes in one minute increments	2 mins	Yes	Yes
[Restrict Auto Reset Time] (See "Restricting Changes to Auto Clear Settings.")	On, Off	Off	Yes	Yes
[Function After Auto Reset] (See "Default Display after Auto Reset.")	Initial Function, Selected Function	Initial Function	Yes	Yes
[Auto Sleep Time] (See "Auto Sleep Time.")	0 sec, 20 secs, 1, 5, 10, 15, 20, 30, 40, 50 mins, 1 hr, 90 mins, 2, 3, 4 hrs	imagePRESS C850/C750/C650: 5 mins1 imagePRESS C65: 1 min1	Yes	Yes*3
[Sleep Mode Energy Use] (See "Energy Consumption in the Sleep Mode.")	Low, High	Low	Yes	Yes
[Auto Sleep Weekly Timer] (See "Auto Sleep Weekly Timer Settings.")	Sun to Sat, 00:00 to 23:59, in one minute increments	-	Yes	Yes
[Time Settings for Auto Adjust Gradation] (See "Time Settings for Auto Adjust Gradation.")	Sun to Sat, 00:00 to 23:59, in one minute increment	-	No	Yes
[Energy Saver/Sleep Mode Exit Time Settings] (See "Setting the Energy Saver/Sleep Mode Exit Time.")	00:00 to 23:59, in one minute increments	-	Yes	Yes
[Mode After Energy Saver Key Pressed] (See "Switching Modes Activated After Pressing Energy Saver Key.")	Energy Saver Mode, Sleep Mode	Sleep Mode	Yes	No
[Change Energy Saver Mode] (See "Changing the Energy Saver Mode.")	-10%, -25%, -50%, Zero Restore Time	-10%	Yes	No
[Low Power Mode Time] (See "Low Power Mode Time.")	5, 10, 15, 20, 30, 40, 50 mins, 1 hr, 90 mins, 2 hrs, 3 hrs, 4 hrs	1 hr	Yes	No
[Perfect Binder Energy Saver Mode Time]*2 (See "Perfect Binder Energy Saver Mode Time.")	0=Off, 10, 15, 20, 30, 40, 50 mins, 1 hr, 90 mins, 2 hrs, 3 hrs, 4 hrs	15 mins	Yes	No
[End the Perfect Binder Energy Saver Mode]*2 (See "Setting When to Deactivate the Perfect Binder Energy Saver Mode.")	Sync with Main Unit, Do Not Sync w/Main Unit	Do Not Sync w/Main Unit	Yes	No

*1	It is recommended that you use the default setting for this item. However, if you set priority is given to productivity when you copy or print, set the value in this mode to '0'. If you set to '0', press to set the machine to enter the Sleep mode or the Energy Saver mode.
*2	Indicates items that appear only when the appropriate optional product is available for use.
*3	If you set '20 secs' or '1 min.', '5 mins' is delivered as device information.

Preferences: Network

If you are configuring the settings for the first time in "Interface Settings," "TCP/IPv4 Settings," "TCP/IPv6 Settings," or "Settings Common to TCP/IPv4 and TCP/IPv6," use the control panel of the machine. After configuring the TCP/IP settings, you can change them using the Remote UI.

If you are using a NetWare or AppleTalk network, you must use the TCP/IP protocol if you want to specify settings using software other than the control panel of the machine.

Output Report (See "Confirming Settings.")

Item	Setting Description	Default Setting	Can be set in Remote UI	Device Information Delivery Available
[Output Report]	Yes, No	-	Yes	No

Confirm Network Connection Set. Changes (See "Interface Settings.")

Item	Setting Description	Default Setting	Can be set in Remote UI	Device Information Delivery Available
[Confirm Network Connection Set. Changes]	On, Off	Off	No	Yes

TCP/IP Settings: IPv4 Settings (See "TCP/IPv4 Settings.")

Item	Setting Description	Default Setting	Can be set in Remote UI	Device Information Delivery Available
[IPv4 Settings]
[Use IPv4]	On, Off	On	Yes	No
[IP Address Settings]
	IP Address	0.0.0.0	Yes	No
	Subnet Mask	0.0.0.0	Yes	No
	Gateway Address	0.0.0.0	Yes	No
	DHCP: On, Off	On	Yes	Yes
	RARP: On, Off	Off	Yes	Yes
	BOOTP: On, Off	Off	Yes	Yes
[DHCP Option Settings]	Acquire Host Name: On, Off	On	Yes	No
	DNS Dynamic Update: On, Off	Off	Yes	No
[PING Command] (See "Confirming TCP/IPv4 Settings (PING Command).")	IP Address	0.0.0.0	No	No

TCP/IP Settings: IPv6 Settings (See "TCP/IPv6 Settings.")

Item	Setting Description	Default Setting	Can be set in Remote UI	Device Information Delivery Available
[IPv6 Settings]
[Use IPv6]	On, Off	Off	Yes	No
[Stateless Address Settings]	Use Stateless Address: On, Off	On	Yes	No
[Manual Address Settings]
	Use Manual Address: On, Off	Off	Yes	No
	Manual Address (IPv6 Address (39 characters maximum))	-	Yes	No
	Prefix Length: 0 to 128	64	Yes	No
	Default Router Addr. (39 characters maximum)	-	Yes	No
[Use DHCPv6]	On, Off	Off	Yes	Yes
[PING Command] (See "Confirming TCP/IPv6 Settings (PING Command).")
	IPv6 Address (39 characters maximum)	-	No	No
	Host Name	-	No	No

TCP/IP Settings: DNS Settings (See "TCP/IPv4 Settings.")

Item	Setting Description	Default Setting	Can be set in Remote UI	Device Information Delivery Available
[DNS Settings]
[DNS Server Address Settings]
	Primary DNS Server (IP Address)	0.0.0.0	Yes	No
	Secondary DNS Server (IP Address)	0.0.0.0	Yes	No
[DNS Host/Domain Name Settings]
	Host Name	Canon**** ("****" represents the last six digits of a MAC address.)	Yes	No
	Domain Name	(NULL)	Yes	No
[DNS Dynamic Update Settings]
	DNS Dynamic Update: On, Off	Off	Yes	No

TCP/IP Settings: DNS Settings (See "TCP/IPv6 Settings.")

Item	Setting Description	Default Setting	Can be set in Remote UI	Device Information Delivery Available
[DNS Settings]
[DNS Server Address Settings]
	Primary DNS Server (IPv6 Address) (39 characters maximum)	-	Yes	No
	Secondary DNS Server (IPv6 Address) (39 characters maximum)	-	Yes	No
[DNS Host/Domain Name Settings]
	Use Same Host Name/Domain Name as IPv4: On, Off	Off	Yes	No
	Host Name	Canon**** ("****" represents the last six digits of a MAC address.)	Yes	No
	Domain Name	-	Yes	No
[DNS Dynamic Update Settings]
	DNS Dynamic Update: On, Off	Off	Yes	No
	Register Stateless Address: On, Off	Off	Yes	No
	Register Manual Address: On, Off	Off	Yes	No
	Register Stateful Address: On, Off	Off	Yes	No

TCP/IP Settings

Item	Setting Description	Default Setting	Can be set in Remote UI	Device Information Delivery Available
[WINS Settings] (See "Protocol Settings.")
	WINS Resolution: On, Off	Off	Yes	No
	WINS Server Address (IP Address)	0.0.0.0	Yes	No
	Node Type: Auto (display only)	-	No	No
	Scope ID	(NULL)	Yes	No
[LPD Print Settings] (See "Settings Common to TCP/IPv4 and TCP/IPv6.")
	On, Off	On	Yes	Yes
	LPD Banner Page*1: On, Off	Off	Yes	Yes
[RAW Print Settings] (See "Settings Common to TCP/IPv4 and TCP/IPv6.")
	On, Off	On	Yes	Yes
	Bidirectional Communication: On, Off	Off	Yes	Yes
[SNTP Settings] (See "Settings Common to TCP/IPv4 and TCP/IPv6.")
	Use SNTP: On, Off	Off	Yes	No
	Polling Interval: 1 to 48 hr., in one hour increments	24	Yes	No
	NTP Server Address (IP Address or Host Name)	(NULL)	Yes	No
	Check NTP Server	-	Yes	No
[FTP Print Settings] (See "Settings Common to TCP/IPv4 and TCP/IPv6.")
	Use FTP Printing: On, Off	Off	Yes	Yes
	User Name	guest	Yes	No
	Password	7654321	Yes	No
[WSD Settings] (See "Settings Common to TCP/IPv4 and TCP/IPv6.")
	Use WSD: On, Off	Off	Yes	Yes
	Use WSD Browsing: On, Off	Off	Yes	Yes
	Use WSD Scan Function: On, Off	Off	Yes	Yes
[Use FTP PASV Mode] (See "Settings Common to TCP/IPv4 and TCP/IPv6.")	On, Off	Off	Yes	Yes
[IPP Print Settings] (See "Settings Common to TCP/IPv4 and TCP/IPv6.")	On, Off	Off	Yes	Yes
	Use TLS: On, Off	Off	Yes	No
	Use Authentication: On, Off	On	Yes	No
	User Name	guest	Yes	No
	Password	7654321	Yes	No
[Multicast Discovery Settings] (See "Settings Common to TCP/IPv4 and TCP/IPv6.")
	Response: On, Off	On	Yes	Yes
	Scope Name	default	Yes	No
[Use HTTP] (See "Settings Common to TCP/IPv4 and TCP/IPv6.")	On, Off	On	Yes	Yes
[TLS Settings] (See "Setting the Key Pair Used With TLS Encrypted Communications.")	Settings That Use TLS	-	Yes	No
[Key and Certificate]
	Set as the Default Key	-	Yes	No
	Certificate Details(Version, Serial Number, Signature Algorithm, Issued To, Validity Start Date, Validity End Date, Issuer, Public Key, Certificate Thumbprint, Verify Cert.)	-	Yes	No
	Display Use Location (Key and Certificate)	-	Yes	No
[Proxy Settings] (See "Settings Common to TCP/IPv4 and TCP/IPv6.")
	Use Proxy: On, Off	Off	Yes	No
	Server Address (IP Address or FQDN)	(NULL)	Yes	No
	Port Number: 1 to 65535	80	Yes	No
	Use Proxy within the Same Domain: On, Off	Off	Yes	No
[Set Authentication]
	Use Proxy Auth.: On, Off	Off	Yes	No
	User Name	(NULL)	Yes	No
	Password	(NULL)	Yes	No
[Confirm Dept. ID PIN] (See "Settings Common to TCP/IPv4 and TCP/IPv6.")	On, Off	Off	Yes	No

*1	Indicates items that appear only when the appropriate optional product is available for use.

IPSec Settings (See "IPSec Settings.")

Item	Setting Description	Default Setting	Can be set in Remote UI	Device Information Delivery Available
[IPSec Settings]
<Use IPSec>	On, Off	Off	Yes	No
<Receive Non-Policy Packets>	Allow, Reject	Allow	Yes	No
[Policy On/Off]	On, Off	On	Yes	No
[Reg.]
	Policy Name (24 characters maximum)	(NULL)	Yes	No
[Selector Settings]
	Local Address(All IP Addresses, IPv4 Address, IPv6 Address, IPv4 Manual Settings, IPv6 Manual Settings)	All IP Addresses	Yes	No
	IPv4 Manual Settings(Single Address, Address Range(First Address, Last Address), Subnet Settings(Address, Subnet Mask))	Single Address	Yes	No
	IPv6 Manual Settings (Single Address(Address), Address Range (First Address, Last Address), Specify Prefix (Address, Prefix Length))	Single Address	Yes	No
	Prefix Length (0 to 128)	64	Yes	No
	Remote Address(All IP Addresses, All IPv4 Addresses, All IPv6 Addresses, IPv4 Manual Settings, IPv6 Manual Settings)	All IP Addresses	Yes	No
	IPv4 Manual Settings(Single Address, Address Range(First Address, Last Address), Subnet Settings(Address, Subnet Mask))	Single Address	Yes	No
	IPv6 Manual Settings (Single Address(Address), Address Range (First Address, Last Address), Specify Prefix (Address, Prefix Length))	Single Address	Yes	No
	Prefix Length (0 to 128)	64	Yes	No
	Port (Specify by Port Number, Specify by Service Name)	Specify by Port Number	Yes	No
	Specify by Port Number(Local Port(All Ports, Single Port), Remote Port(All Ports, Single Port))	All Ports	Yes	No
	Single Port (1 to 65535)	0	Yes	No
	Specify by Service Name Service On/Off: On, Off	Off	Yes	No
[IKE Settings]
	IKE Mode: Main, Aggressive	Main	Yes	No
	Authentication Method: Pre-Shared Key Method (Shared Key), Digital Sig. Method (Key and Certificate)	Pre-Shared Key Method	Yes	No
	Key and Certificate: Set as the Default Key	-	Yes	No
	Certificate Details(Version, Serial Number, Signature Algorithm, Issued To, Validity Start Date, Validity End Date, Issuer, Public Key, Certificate Thumbprint, Verify Cert.)	-	Yes	No
	Display Use Location (Key and Certificate)	-	Yes	No
	Auth./Encryption Algorithm (Auto, Manual Settings)	Auto	Yes	No
	Auth./Encryption Algorithm: Manual Settings Authentication SHA1: On, Off	On	Yes	No
	SHA2: On, Off	On	Yes	No
	Encryption 3DES-CBC: On, Off	On	Yes	No
	AES-CBC: On, Off	Off	Yes	No
	DH Group: Group 1 (768), Group 2 (1024), Group 14 (2048), ECDH-P256, ECDH-P384	Group 2 (1024)	Yes	No
[IPSec Network Settings]
	Validity Time: On, Off	On,	Yes	No
	On: (1 to 65535 min.)	480 min.	Yes	No
	Validity Size: On, Off	Off	Yes	No
	On: (1 to 65535 MB)	0 MB	Yes	No
	PFS: On, Off	Off	Yes	No
	Auth./Encryption Algorithm : Auto, Manual Settings	Auto	Yes	No
	Auth./Encryption Algorithm: Manual Settings(ESP, ESP (AES-GCM), AH (SHA1))	ESP	Yes	No
	ESP Settings: ESP Auth. SHA1: On, Off	On	Yes	No
	NULL: On, Off	Off	Yes	No
	ESP Encryption 3DES-CBC: On, Off	On	Yes	No
	AES-CBC: On, Off	Off	Yes	No
	NULL: On, Off	Off	Yes	No
	ESP (AES-GCM) Settings: None	-	Yes	No
	AH (SHA1) Settings: None	-	Yes	No
	Connect. Mode Transport (display only)	-	No	No
[Edit]	-	-	Yes	No
[Delete]	-	-	Yes	No
[Print List]	Yes, No	-		No

NetWare Settings (See "Protocol Settings.")

Item	Setting Description	Default Setting	Can be set in Remote UI	Device Information Delivery Available
[NetWare Settings]
<Use NetWare>	On, Off	Off	Yes	Yes
<Frame Type>	Auto Detect, Ethernet II, Ethernet 802.2, Ethernet 802.3, Ethernet SNAP	Auto Detect	Yes	No
<IPX External Network Number>	Auto (display only)	-	No	No
<Node Number>	Auto (display only)	-	No	No
<Print Service>	Bindery PServer, RPrinter, NDS PServer, NPrinter	NDS PServer	Yes	No
<Packet Signature>	Auto (display only)	-	No	No
[Bindery PServer]
	Print Server Name	(NULL)	Yes	No
	File Server Name	(NULL)	Yes	No
	Print Server Password	(NULL)	Yes	No
	Printer Number: 0 to 15	0	Yes	No
	Polling Interval: 1 to 15 sec.	5 sec.	Yes	No
	Printer Form: 0 to 255	0	Yes	No
	Buffer Size: 1 to 20 KB	20 KB	Yes	No
	Service Mode: Minimize form changes within print queues, Minimize form changes across print queues, Change forms as needed, Service only currently mounted form	Minimize form changes within print queues	Yes	No
[RPrinter]
	Print Server Name	(NULL)	Yes	No
	File Server Name	(NULL)	Yes	No
	Printer Number: 0 to 15	0	Yes	No
[NDS PServer]
	Print Server Name	(NULL)	Yes	No
	Tree Name	(NULL)	Yes	No
	Context Name	(NULL)	Yes	No
	Print Server Password	(NULL)	Yes	No
	Printer Number: 0 to 254	0	Yes	No
	Polling Interval: 1 to 255 sec.	5 sec.	Yes	No
	Printer Form: 0 to 255	0	Yes	No
	Buffer Size: 3 to 20 KB	20 KB	Yes	No
	Service Mode: Minimize form changes within print queues, Minimize form changes across print queues, Change forms as needed, Service only currently mounted form	Minimize form changes within print queues	Yes	No
[NPrinter]
	Print Server Name	(NULL)	Yes	No
	Tree Name	(NULL)	Yes	No
	Context Name	(NULL)	Yes	No
	Printer Number: 0 to 254	0	Yes	No

AppleTalk Settings (See "Protocol Settings.")

Item	Setting Description	Default Setting	Can be set in Remote UI	Device Information Delivery Available
[AppleTalk Settings]
<Use AppleTalk>	On, Off	Off	Yes	Yes
<Phase>	Phase 2 (display only)	-	No	No
[Service Name]	Name	Device Name	Yes	No
[Zone]	Zone	*	Yes	No
<Print Mode>*1	Both, Spool, Direct	Both	Yes	No

*1	The imagePRESS Printer Kit may be required to display this item.

SMB Server Settings (See "Protocol Settings.")

Item	Setting Description	Default Setting	Can be set in Remote UI	Device Information Delivery Available
[SMB Server Settings]
<Use SMB Server>	On, Off	Off	Yes	No
[Server Name]	Server Name	Canon**** ("****" represents the last six digits of a MAC address.)	Yes	No
[Workgroup Name]	Workgroup Name	WORKGROUP	Yes	No
[Comment]	Comment	(NULL)	Yes	No
<LM Announce>	On, Off	Off	Yes	No
[Set SMB Printer]
	Use SMB: On, Off	Off	Yes	No
	Printer Name	PRINTER	Yes	No

SNMP Settings (See "Communication Environment Setup.")

Item	Setting Description	Default Setting	Can be set in Remote UI	Device Information Delivery Available
[SNMP Settings]
<Use SNMPv1>	On, Off	On	Yes	Yes
[Dedicated Comm. Settings]
	Dedicated Community: On, Off	On	Yes	No
	MIB Access Permission: Read/Write, Read Only	Read/Write	Yes	No
[Set Community Name 1]
	Community Name 1: On, Off	On	Yes	No
	MIB Access Permission: Read/Write, Read Only	Read Only	Yes	No
	Community Name	public	Yes	No
[Set Community Name 2]
	Community Name 2: On, Off	Off	Yes	No
	MIB Access Permission: Read/Write, Read Only	Read Only	Yes	No
	Community Name	public2	Yes	No
<Use SNMPv3>	On, Off	Off	Yes	No
[User Settings]
	User On/Off: On, Off	On	Yes	No
	Register (User Name, MIB Access Permis. (Read/Write, Read Only), Security Settings (Auth. Yes/Encry. Yes, Auth. Yes/Encry. No, Auth. No/Encrypt. No), Authent. Algorithm (MD5, SHA1), Authent. Password, Encryption Algorithm (DES, AES), Encryption Password)	-	Yes	No
	Details/Edit (User Name, MIB Access Permis. (Read/Write, Read Only), Security Settings (Auth. Yes/Encry. Yes, Auth. Yes/Encry. No, Auth. No/Encrypt. No), Authent. Algorithm (MD5, SHA1), Authent. Password, Encryption Algorithm (DES, AES), Encryption Password)	-	Yes	No
	Delete	-	Yes	No
[Context Settings]
	Register (Context name)	-	Yes	No
	Edit (Context name)	-	Yes	No
	Delete	-	Yes	No
<Retrieve Printer Mgmt. Info. from Host>	On, Off	Off	Yes	Yes
<Reject SNMP Packets While in Sleep Mode>	On, Off	Off	Yes	No

Dedicated Port Settings (See "Communication Environment Setup.")

Item	Setting Description	Default Setting	Can be set in Remote UI	Device Information Delivery Available
[Dedicated Port Settings]	On, Off	On	Yes	Yes

Use Spool Function (See "Communication Environment Setup.")

Item	Setting Description	Default Setting	Can be set in Remote UI	Device Information Delivery Available
[Use Spool Function]	On, Off	Off	Yes	Yes

Waiting Time for Connection at Startup (See "Setting the Waiting Time for Connection at Startup.")

Item	Setting Description	Default Setting	Can be set in Remote UI	Device Information Delivery Available
[Waiting Time for Connection at Startup]	30 to 300 sec.	30 sec.	Yes	No

Ethernet Driver Settings (See "Interface Settings.")

Item	Setting Description	Default Setting	Can be set in Remote UI	Device Information Delivery Available
[Ethernet Driver Settings]
<Auto Detect>	On, Off	On	Yes	No
<Communication Mode>	Off: Half Duplex, Full Duplex	Half Duplex	Yes	No
<Ethernet Type>	Off: 10BASE-T, 100BASE-TX, 1000BASE-T	10BASE-T	Yes	No
<MAC Address>	Display only	-	No	No

IEEE 802.1X Settings (See "Selecting the IEEE 802.1X Authentication Method.")

Item	Setting Description	Default Setting	Can be set in Remote UI	Device Information Delivery Available
[IEEE 802.1X Settings]
<Use IEEE 802.1X>	On, Off	Off	Yes	No
[Login Name]	Login Name	(NULL)	Yes	No
<Use TLS>	On, Off	Off	Yes	No
[Key and Certificate]
	Set as the Default Key	-	Yes	No
	Certificate Details (Version, Serial Number, Signature Algorithm, Issued To, Validity Start Date, Validity End Date, Issuer, Public Key, Certificate Thumbprint, Verify Cert.)	-	Yes	No
	Display Use Location (Key and Certificate)	-	Yes	No
<Use TTLS>	On, Off	Off	Yes	No
	TTLS Settings (TTLS Protocol): MSCHAPv2, PAP	MSCHAPv2	Yes	No
<Use PEAP>	On, Off	Off	Yes	No
[User Name]	Name of the user to be authenticated with IEEE 802.1X authentication	(NULL)	Yes	No
[Password]	Password of the user to be authenticated with IEEE 802.1X authentication	(NULL)	Yes	No
[Same User Name as Login Name]	On, Off	On	Yes	No

Firewall Settings: IPv4 Address Filter (See "TCP/IPv4 Settings.")

Item	Setting Description	Default Setting	Can be set in Remote UI	Device Information Delivery Available
[IPv4 Address Filter]
[Outbound Filter]	Use Filter: On, Off	Off	Yes	No
	Default Policy: Allow, Reject	Allow	Yes	No
	Register (Up to 16 IPv4 addresses), Edit, Delete	-	Yes	No
	Register Single Address, Address Range (First Address, Last Address), Specify Prefix (Address, Prefix Length)	Single Address	Yes	No
	Prefix Length (0 to 32)	-	Yes	No
[Inbound Filter]	Use Filter: On, Off	Off	Yes	No
	Default Policy: Allow, Reject	Allow	Yes	No
	Register (Up to 16 IPv4 addresses), Edit, Delete	-	Yes	No
	Register Single Address, Address Range (First Address, Last Address), Specify Prefix (Address, Prefix Length), Port Number (Do Not Specify, Specify)	Single Address	Yes	No
	Prefix Length (0 to 32)	-	Yes	No

Firewall Settings: IPv6 Address Filter (See "TCP/IPv6 Settings.")

Item	Setting Description	Default Setting	Can be set in Remote UI	Device Information Delivery Available
[IPv6 Address Filter]
[Outbound Filter]	Use Filter: On, Off	Off	Yes	No
	Default Policy: Allow, Reject	Allow	Yes	No
	Register (Up to 16 IPv4 addresses), Edit, Delete	-	Yes	No
	Register Single Address (Address), Specify Prefix (IPv6 Prefix, Prefix Length)	Single Address	Yes	No
	Prefix Length (0 to 128)	-	Yes	No
[Inbound Filter]	Use Filter: On, Off	Off	Yes	No
	Default Policy: Allow, Reject	Allow	Yes	No
	Register (Up to 16 IPv6 addresses), Edit, Delete	-	Yes	No
	Register Single Address (Address), Specify Prefix (IPv6 Prefix, Prefix Length), Port Number (Do Not Specify, Specify)	Single Address	Yes	No
	Prefix Length (0 to 128)	-	Yes	No

Firewall Settings: MAC Address Filter (See "Settings Common to TCP/IPv4 and TCP/IPv6.")

Item	Setting Description	Default Setting	Can be set in Remote UI	Device Information Delivery Available
[MAC Address Filter]
[Outbound Filter]	Use Filter: On, Off	Off	Yes	No
	Default Policy: Allow, Reject	Allow	Yes	No
	Register (Up to 100 Mac addresses), Edit, Delete	-	Yes	No
[Inbound Filter]	Use Filter: On, Off	Off	Yes	No
	Default Policy: Allow, Reject	Allow	Yes	No
	Register (Up to 100 Mac addresses), Edit, Delete	-	Yes	No

Firewall Settings: IP Address Block Log (See "Checking the Block Log.")

Item	Setting Description	Default Setting	Can be set in Remote UI	Device Information Delivery Available
[IP Address Block Log]	Time, Type, IP Address, Port Number, Result	-	Yes	No

Preferences: External Interface

USB Settings (See "Using the USB Port.")

Item	Setting Description	Default Setting	Can be set in Remote UI	Device Information Delivery Available
[USB Settings]
[Use as USB Device]	On, Off	On	Yes	Yes
[Use MEAP Driver for USB Input Device]	On, Off	Off	Yes	Yes
[Use MEAP Driver for USB Storage Device]	On, Off	Off	Yes	Yes

Preferences: Accessibility

Item	Setting Description	Default Setting	Can be set in Remote UI	Device Information Delivery Available
[Key Repetition Settings] (See "Key Repetition Settings.")	Standard, Slightly Slow, Slow	Standard	No	No
[Reversed Display (Color)] (See "Inverting the Screen Colors.")	On, Off	Off	No	No

NOTE
Some items can be set using the Remote UI. Use the control panel of the device to set items which cannot be set using the Remote UI. The names may be different on the Remote UI.