IMPORTANT |
You can click [LDAP Server Management] only if you select [Server Authentication + Local Device Authentication] for [User Authentication System] and [LDAP Server] for [Authentication Server Type]. When you click [LDAP Server Management] to display the [LDAP Server Management] screen, the settings in [Configuration] is stored. |
Item | Setting Content | Setting Conditions | Default Setting |
Server Name | Enter the name of the LDAP server. | Must be from 1 to 24 characters. You cannot include spaces. You cannot use "localhost." | <Null> |
Server Address | Enter the IP address of the LDAP server. | Must be from 1 to 48 characters. You cannot use "127.0.0.1." | <Null> |
Port | Set the port number that the LDAP server uses. | Must be from 1 to 65535. You cannot use zeros. | 636 (if the [Use TLS] check box is selected.) 389 (if the [Use TLS] check box is not selected.) |
Comments | Enter comments about the LDAP server. | Must be from 1 to 64 characters. | <Null> |
Use TLS | Set whether to use TLS. | To use TLS, it is necessary that the LDAP server is set to use TLS. | Selected |
Use authentication information | Set whether to use authentication information to communicate with the LDAP server. | When selected: communicate with the LDAP server using the authentication information which is set for [User Name] and [Password]. When not selected: communicate with the LDAP server anonymously. It is necessary that the LDAP server is set to allow anonymous accesses. | Selected |
User Name | Enter the LDAP server Administrator DN registered on the LDAP server. Examples: uid=Administrator, dc=ldap, dc=com | Must be from 1 to 128 characters. You cannot use asterisks. | <Null> |
Password | Set a password that corresponds with the user name. | Must be from 1 to 24 characters. | <Null> |
Attribute Name for Name | Set the name of the attribute that holds the names of the user in the LDAP server. Example: uid | Must be from 1 to 64 characters. You cannot include spaces or the following symbols (\ / : * ? l < > [ ] ; , = + @ " &). | <Null> |
Starting Point for Search | Set starting point for search in LDAP server authentication (where to start searching on the directory tree). | Must be from 1 to 128 characters. | <Null> |
Attribute Name: E-Mail Address | Set the name of the attribute used to acquire the e-mail address of the logged-in user (LoginContext: mail). Example: mail | Must be from 1 to 64 characters. You cannot include spaces or the following symbols (\ / : * ? l < > [ ] ; , = + @ " &). | <Null> |
Attribute Name: Display Name | Set the name of the attribute used to acquire the display names of the logged-in user (LoginContext "cn"). Example: cn | Must be from 1 to 64 characters. You cannot include spaces or the following symbols (\ / : * ? l < > [ ] ; , = + @ " &). | <Null> |
Domain Name Setting Method: Specify the domain name | Select if you set the domain name of the logged-in user directly (LoginContext "dc"). | - | Selected |
Domain Name | Set the domain name of the logged-in user (LoginContext "dc"). | Must be from 1 to 64 characters. You cannot include spaces or the following symbols (\ / : * ? l < > [ ] ; , = + @ " &). | <Null> |
Domain Name Setting Method: Specify the attribute name for domain name acquisition | Select if you acquire the domain name of the logged-in user from the specified attribute. | - | Not Selected |
Attribute Name | Set the name of the attribute used to acquire the domain name of the logged-in user (LoginContext "dc"). | Must be from 1 to 64 characters. You cannot include spaces or the following symbols (\ / : * ? l < > [ ] ; , = + @ " &). If the domain name cannot be acquired from the specified attribute and the logged-in user's DN contains "dc," the left most attribute value is set as LoginContext "dc." If not still acquired, the value set for [Server Name] is set as LoginContext "dc." | <Null> |
NOTE |
Make sure to set any value except [Comment], [Starting Point for Search], and [Domain Name Setting Method] ([Domain Name] and [Attribute Name]). |