Copy Tray-R2
If the Copy Tray-R2 is attached to the machine, the following modes are available:
Collate Mode
The prints are automatically collated into sets arranged in page order before they are delivered to the output tray.
Group Mode
All prints of the same original page are grouped together into sets before they are delivered to the output tray.
Rotate 90 Degrees Mode
If originals of the same size are printed, the prints are automatically collated into sets arranged in page order, and are output in alternating directions to the output tray.
Parts and Their Functions
1. | Auxiliary Tray Pull out the auxiliary tray if you are printing on large size paper (A3 or A4R). |
2. | Output Tray Prints are output to this tray. |
Paper Sizes that can be Output
The following are paper sizes that can be output from the Copy Tray-R2. However, some paper sizes may not be output, depending on the set functions.
: Available-: Unavailable
Paper Size | Output Tray | |
330 mm x 483 mm | | |
305 mm x 457 mm | | |
320 mm x 450 mm (SRA3) | | |
A3 | | |
A4 | | |
A4R | | |
A5R | | |
Custom Size (100 mm x 148 mm to 330.2 mm x 487.7 mm)*1 | | |
Envelope | No.10(COM10) | |
Monarch | | |
DL | | |
ISO-C5 | | |
Nagagata 3 | | |
Yougatanaga 3 | | |
Kakugata 2 | | |
Custom Size (100 mm x 148 mm to 330.2 mm x 487.7 mm) | | |
*1 When the Long Sheet Tray-B1 is attached, long sheet paper (210 mm x 487.8 mm to 330.2 mm x 762 mm) can be used.