Preferences

Preferences: Paper Settings

Item
Setting Description
Default
Setting
Can be set in
Remote UI
Device Information
Delivery Available
[Paper Settings]
Select the paper source:
Set
Thin 2 (52-63 g/m2), Thin 1 (64-79 g/m2), Plain 1 (80-90 g/m2), Plain 2 (91-105 g/m2), Heavy 1 (106-128 g/m2), Heavy 2 (129-150 g/m2), Heavy 3 (151-180 g/m2), Heavy 4 (181-220 g/m2), Heavy 5 (221-256 g/m2), Heavy 6 (257-300 g/m2), Color 1 (64-79 g/m2), Color 2 (80-90 g/m2), Recycled 1 (64-79 g/m2), Recycled 2 (80-90 g/m2), Recycled 3 (91-105 g/m2), Pre-Punched 1 (64-79 g/m2), Pre-Punched 2 (80-90 g/m2), Transparency, Clear Film, Labels, Tab 1 (151-180 g/m2), Tab 2 (181-220 g/m2), Bond 1 (64-79 g/m2), Bond 2 (80-90 g/m2), Bond 3 (91-105 g/m2), Letterhead, 1-Sided Coated 1 (106-128 g/m2), 1-Sided Coated 2 (129-150 g/m2), 1-Sided Coated 3 (151-180 g/m2), 1-Sided Coated 4 (181-220 g/m2), 1-Sided Coated 5 (221-256 g/m2), 1-Sided Coated 6 (257-300 g/m2), 2-Sided Coated 1 (106-128 g/m2), 2-Sided Coated 2 (129-150 g/m2), 2-Sided Coated 3 (151-180 g/m2), 2-Sided Coated 4 (181-220 g/m2), 2-Sided Coated 5 (221-256 g/m2), 2-Sided Coated 6 (257-300 g/m2), Matte Coated 1 (106-128 g/m2), Matte Coated 2 (129-150 g/m2), Matte Coated 3 (151-180 g/m2), Matte Coated 4 (181-220 g/m2), Matte Coated 5 (221-256 g/m2), Matte Coated 6 (257-300 g/m2), Textured 1 (80-90 g/m2), Textured 2 (91-105 g/m2), Textured 3 (106-128 g/m2), Textured 4 (129-150 g/m2), Textured 5 (151-180 g/m2), Textured 6 (181-220 g/m2), Textured 7 (221-256 g/m2), Textured 8 (257-300 g/m2), Vellum 1 (64-79 g/m2), Vellum 2 (80-90 g/m2), Vellum 3 (91-105 g/m2), Envelope, Custom Type
Plain 1 (80-90 g/m2)
Yes
No
Custom Size
-
No
No
Envelope
Nagagata 3, Yougatanaga 3, Kakugata 2, No. 10 (COM10), ISO-C5, DL, Monarch
No. 10 (COM10)
No
No
[Paper Size Group for Auto Recog. in Drawer]
Paper Drawer: All Sizes, A/B Size, Inch Size
A/B Size
No
No
Multi-purpose Tray*1: A/B Size, Inch Size
A/B Size
No
No
[A5R/STMTR Paper Selection]
A5R, STMTR
A5R
No
No
[B5/EXEC Paper Selection]
B5, EXEC
B5
No
No
[Paper Type Management Settings]
Details/Edit
Name, Category, Basis Weight, Size, Finish, Type, Color, 2nd Side of 2-Sided Page, Adjust Creep Correction, Curl Correction Level, Adj. Ppr Separation Fan Level, Adj. Fan for Paper Convey., Adjust Image Position, Adjust Paper Curve, Adj. Paper Realignment Speed, Correct Image for Scratching, Adjust Lead/Tail Margins, Toner Amount Reduct. Mode, Adj. Secondary Transfer Volt., Adj. Antistatic Bias, Adjust ITB Image Clearing, Adjust Gloss/Fine Black, Change Fold/Stitch Position*1, Adj. Saddle Stitch Fold Pos.*1, Adjust Saddle Fold Position*1, Adjust Hole Punch Position*1, Corr. Tail End Toner Applic., Adjust Fixing Speed, Adjust Fixing Pressure, Auto Adj. L/R Edge Alignment, Adj. Primary Transfer Voltage
-
Yes
No
Duplicate, Delete, Paper Database
-
Yes
No
[Multi-Purpose Tray Defaults]*1
On, Off
Register(Paper Size/Paper Type)
Off
No
No
[Register Custom Size]
S1 to S5:
Register/Edit, Rename
-
No
Yes
Delete
-
No
No
*1 Indicates items that appear only when the appropriate optional product is available for use.

Preferences: Display Settings

Item
Setting Description
Default
Setting
Can be set in
Remote UI
Device Information
Delivery Available
[Default Screen after Startup/Restoration]
Main Menu, Quick Menu, Copy*1, Scan and Send, Fax*1, Scan and Store*1, Access Stored Files, Fax/I-Fax Inbox, Hold, Secure Print, Web Access*1, Scanner, Print Server*1, WSD Scan
Main Menu
No
No
Open Status Monitor/Cancel: On, Off
On
No
No
[Default Screen (Status Monitor/Cancel)]
Default Status Type: Job, Paper, Toner/Other
Job
No
No
Status/Log: Job Status, Job Log
Job Status
No
No
Details (Job, Job Status):
Print, Copy*1, Send, Send (Fax), Forward, Store
-
No
No
Details (Job, Job Log):
Copy*1, Printer, Local Print, Received Job Print, Print Report, Send, Send (Fax), Receive, Store
-
No
No
[Copy Screen Display Settings]*1
Regular Copy, Express Copy
Regular Copy
No
No
[Display Fax Function]*1
On, Off
On
No
No
Enable Fax in Scan and Send Function*1: On, Off
Off
No
No
[Store Location Display Settings]
Mail Box: On, Off
On
No
No
Memory Media: On, Off
Off
No
No
[Switch Language/Keyboard On/Off]
On, Off
Off
No
No
[Switch Language/Keyboard]
Language, Keyboard Layout
-
No
No
[Use Keyboard Shift Lock Feature]
On, Off
On
No
Yes
[Display Remaining Paper Message]
On, Off
On
No
No
[No. of Copies/Job Duration Status]
On, Off
On
No
No
[Notify to Clean Original Scanning Area]*1
On, Off
On
No
No
[Change Display of Paper List Screen]
W/Illustrations, No Illustrations
W/Illustrations
No
No
[Paper Type Selection Screen Priority]
Simple, Detailed
Detailed
No
No
[Change Default Display for Paper Type List]
Category:
All, Standard Type, Custom Type
All
No
No
Sort:
Reg'd (Asc.), Reg'd (Desc.), Name (Asc.), Name (Desc.), Weight (Asc.), Weight (Desc.)
Reg'd (Desc.)
No
No
[Switch Millimeter/Inch Entry]
mm, Inch
mm
No
Yes
[ID/User Name Display On/Off]
On, Off
On
No
No
[Display Remaining Toner Error Message]
On, Off
Off
No
No
[Delete Remaining Toner Error]
Yes, No
-
No
No
[Edit Puncher Unit Die Name]*1
Edit
-
Yes
No
*1
Indicates items that appear only when the appropriate optional product is available for use.

Preferences: Timer/Energy Settings

Item
Setting Description
Default
Setting
Can be set in
Remote UI
Device Information
Delivery Available
[Adjust Time]
00:00 to 23:59, in one minute increments
-
No
No
[Date/Time Settings]
Date and Time Setting (12 digit number)
-
Yes
No
Time Zone: GMT-12:00 to GMT+12:00
GMT +00:00
Yes
No
Daylight Saving Time: On, Off
Off
Yes
No
Start Date (Month/Day/Time (0 to 23))
April, 1st, Sunday, 2:00
Yes
No
End Date (Month/Day/Time (0 to 23))
October, Final, Sunday, 2:00
Yes
No
[Time Format]
24 Hour, 12 Hour
24 Hour
Yes
No
[Quick Startup Settings for Main Power]
On, Off
Off
Yes
Yes
[Auto Reset Time]
0 min=Off, 10 to 50 seconds in 10 second increments, 1 to 9 minutes in one minute increments
2 mins
Yes
Yes
[Restrict Auto Reset Time]
On, Off
Off
Yes
Yes
[Function After Auto Reset]
Initial Function, Selected Function
Initial Function
Yes
Yes
[Auto Shutdown Time]
0 hr=Off, 1 to 8 hours in one hour increments
4 hrs
Yes
Yes
[Auto Shutdown Weekly Timer]
Sun to Sat, 00:00 to 23:59, in one minute increments
-
Yes
Yes
[Auto Sleep Time]
0 sec, 20 secs, 1, 5, 10, 15, 20, 30, 40, 50 mins, 1 hr, 90 mins, 2, 3, 4 hrs
5 mins*1
Yes
Yes*3
[Sleep Mode Energy Use]
Low, High
Low
Yes
Yes
[Auto Sleep Weekly Timer]
Sun to Sat, 00:00 to 23:59, in one minute increments
-
Yes
Yes
[Time Settings for Auto Adjust Gradation]
Sun to Sat, 00:00 to 23:59, in one minute increment
-
No
Yes
[Energy Saver/Sleep Mode Exit Time Settings]
00:00 to 23:59, in one minute increments
-
Yes
Yes
[Mode After Energy Saver Key Pressed]
Energy Saver Mode, Sleep Mode
Sleep Mode
Yes
No
[Change Energy Saver Mode]
(See "Changing the Energy Saver Mode.")
-10%, -25%, -50%, Zero Restore Time
-10%
Yes
No
[Low Power Mode Time]
(See "Low Power Mode Time.")
5, 10, 15, 20, 30, 40, 50 mins, 1 hr, 90 mins, 2 hrs, 3 hrs, 4 hrs
1 hr
Yes
No
[Perfect Binder Energy Saver Mode Time]*2
0=Off, 10, 15, 20, 30, 40, 50 mins, 1 hr, 90 mins, 2 hrs, 3 hrs, 4 hrs
15 mins
Yes
No
[End the Perfect Binder Energy Saver Mode]*2
Sync with Main Unit, Do Not Sync w/Main Unit
Do Not Sync w/Main Unit
Yes
No
*1
It is recommended that you use the default setting for this item. However, if you set priority is given to productivity when you copy or print, set the value in this mode to '0'. If you set to '0', press to set the machine to enter the Sleep mode or the Energy Saver mode.
*2
Indicates items that appear only when the appropriate optional product is available for use.
*3
If you set '20 secs' or '1 min.', '5 mins' is delivered as device information.

Preferences: Network

If you are configuring the settings for the first time in "Interface Settings," "TCP/IPv4 Settings," "TCP/IPv6 Settings," or "Settings Common to TCP/IPv4 and TCP/IPv6," use the control panel of the machine. After configuring the TCP/IP settings, you can change them using the Remote UI.
If you are using a NetWare or AppleTalk network, you must use the TCP/IP protocol if you want to specify settings using software other than the control panel of the machine.
Output Report (See "Confirming Settings.")
Item
Setting Description
Default Setting
Can be set in Remote UI
Device Information Delivery Available
[Output Report]
Yes, No
-
Yes
No
Confirm Network Connection Set. Changes (See "Interface Settings.")
Item
Setting Description
Default Setting
Can be set in Remote UI
Device Information Delivery Available
[Confirm Network Connection Set. Changes]
On, Off
Off
No
Yes
TCP/IP Settings: IPv4 Settings (See "TCP/IPv4 Settings.")
Item
Setting Description
Default Setting
Can be set in
Remote UI
Device Information
Delivery Available
[IPv4 Settings]
[Use IPv4]
On, Off
On
Yes
No
[IP Address Settings]
IP Address
0.0.0.0
Yes
No
Subnet Mask
0.0.0.0
Yes
No
Gateway Address
0.0.0.0
Yes
No
DHCP: On, Off
On
Yes
Yes
RARP: On, Off
Off
Yes
Yes
BOOTP: On, Off
Off
Yes
Yes
[DHCP Option Settings]
Acquire Host Name: On, Off
On
Yes
No
DNS Dynamic Update: On, Off
Off
Yes
No
[PING Command]
IP Address
0.0.0.0
No
No
TCP/IP Settings: IPv6 Settings (See "TCP/IPv6 Settings.")
Item
Setting Description
Default
Setting
Can be set in
Remote UI
Device Information
Delivery Available
[IPv6 Settings]
[Use IPv6]
On, Off
Off
Yes
No
[Stateless Address Settings]
Use Stateless Address: On, Off
On
Yes
No
[Manual Address Settings]
Use Manual Address: On, Off
Off
Yes
No
Manual Address (IPv6 Address (39 characters maximum))
-
Yes
No
Prefix Length: 0 to 128
64
Yes
No
Default Router Addr. (39 characters maximum)
-
Yes
No
[Use DHCPv6]
On, Off
Off
Yes
Yes
[PING Command]
IPv6 Address (39 characters maximum)
-
No
No
Host Name
-
No
No
TCP/IP Settings: DNS Settings (See "TCP/IPv4 Settings.")
Item
Setting Description
Default Setting
Can be set in
Remote UI
Device Information
Delivery Available
[DNS Settings]
[DNS Server Address Settings]
Primary DNS Server (IP Address)
0.0.0.0
Yes
No
Secondary DNS Server (IP Address)
0.0.0.0
Yes
No
[DNS Host/Domain Name Settings]
Host Name
Canon****** ("******" represents the last six digits of a MAC address.)
Yes
No
Domain Name
(NULL)
Yes
No
[DNS Dynamic Update Settings]
DNS Dynamic Update: On, Off
Off
Yes
No
TCP/IP Settings: DNS Settings (See "TCP/IPv6 Settings.")
Item
Setting Description
Default Setting
Can be set in
Remote UI
Device Information
Delivery Available
[DNS Settings]
[DNS Server Address Settings]
Primary DNS Server (IPv6 Address)
(39 characters maximum)
-
Yes
No
Secondary DNS Server (IPv6 Address)
(39 characters maximum)
-
Yes
No
[DNS Host/Domain Name Settings]
Use Same Host Name/Domain Name as IPv4: On, Off
Off
Yes
No
Host Name
Canon****** ("******" represents the last six digits of a MAC address.)
Yes
No
Domain Name
-
Yes
No
[DNS Dynamic Update Settings]
DNS Dynamic Update: On, Off
Off
Yes
No
Register Stateless Address: On, Off
Off
Yes
No
Register Manual Address: On, Off
Off
Yes
No
Register Stateful Address: On, Off
Off
Yes
No
TCP/IP Settings
Item
Setting Description
Default
Setting
Can be set in
Remote UI
Device Information
Delivery Available
[WINS Settings]
WINS Resolution: On, Off
Off
Yes
No
WINS Server Address (IP Address)
0.0.0.0
Yes
No
Node Type: Auto (display only)
-
No
No
Scope ID
(NULL)
Yes
No
[LPD Print Settings]
On, Off
On
Yes
Yes
LPD Banner Page*1: On, Off
Off
Yes
Yes
[RAW Print Settings]
On, Off
On
Yes
Yes
Bidirectional Communication: On, Off
Off
Yes
Yes
[SNTP Settings]
Use SNTP: On, Off
Off
Yes
No
Polling Interval: 1 to 48 hr., in one hour increments
24
Yes
No
NTP Server Address (IP Address or Host Name)
(NULL)
Yes
No
Check NTP Server
-
Yes
No
[FTP Print Settings]
Use FTP Printing: On, Off
Off
Yes
Yes
User Name
guest
Yes
No
Password
7654321
Yes
No
[WSD Settings]
Use WSD: On, Off
Off
Yes
Yes
Use WSD Browsing: On, Off
Off
Yes
Yes
Use WSD Scan Function: On, Off
Off
Yes
Yes
[Use FTP PASV Mode]
On, Off
Off
Yes
Yes
[IPP Print Settings]
On, Off
Off
Yes
Yes
Use TLS: On, Off
Off
Yes
No
Use Authentication: On, Off
On
Yes
No
User Name
guest
Yes
No
Password
7654321
Yes
No
[Multicast Discovery Settings]
Response: On, Off
On
Yes
Yes
Scope Name
default
Yes
No
[Use HTTP]
On, Off
On
Yes
Yes
[TLS Settings]
Settings That Use TLS
-
Yes
No
[Key and Certificate]
Set as the Default Key
-
Yes
No
Certificate Details(Version, Serial Number, Signature Algorithm, Issued To, Validity Start Date, Validity End Date, Issuer, Public Key, Certificate Thumbprint, Verify Cert.)
-
Yes
No
Display Use Location (Key and Certificate)
-
Yes
No
[Proxy Settings]
Use Proxy: On, Off
Off
Yes
No
Server Address (IP Address or FQDN)
(NULL)
Yes
No
Port Number: 1 to 65535
80
Yes
No
Use Proxy within the Same Domain: On, Off
Off
Yes
No
[Set Authentication]
Use Proxy Auth.: On, Off
Off
Yes
No
User Name
(NULL)
Yes
No
Password
(NULL)
Yes
No
[Confirm Dept. ID PIN]
On, Off
Off
Yes
No
*1
Indicates items that appear only when the appropriate optional product is available for use.
IPSec Settings (See "IPSec Settings.")
Item
Setting Description
Default
Setting
Can be set in
Remote UI
Device Information
Delivery Available
[IPSec Settings]
<Use IPSec>
On, Off
Off
Yes
No
<Receive Non-Policy Packets>
Allow, Reject
Allow
Yes
No
[Policy On/Off]
On, Off
On
Yes
No
[Reg.]
Policy Name (24 characters maximum)
(NULL)
Yes
No
[Selector Settings]
Local Address(All IP Addresses, IPv4 Address, IPv6 Address, IPv4 Manual Settings, IPv6 Manual Settings)
All IP Addresses
Yes
No
IPv4 Manual Settings(Single Address, Address Range(First Address, Last Address), Subnet Settings(Address, Subnet Mask))
Single Address
Yes
No
IPv6 Manual Settings (Single Address(Address), Address Range (First Address, Last Address), Specify Prefix (Address, Prefix Length))
Single Address
Yes
No
Prefix Length (0 to 128)
64
Yes
No
Remote Address(All IP Addresses, All IPv4 Addresses, All IPv6 Addresses, IPv4 Manual Settings, IPv6 Manual Settings)
All IP Addresses
Yes
No
IPv4 Manual Settings(Single Address, Address Range(First Address, Last Address), Subnet Settings(Address, Subnet Mask))
Single Address
Yes
No
IPv6 Manual Settings (Single Address(Address), Address Range (First Address, Last Address), Specify Prefix (Address, Prefix Length))
Single Address
Yes
No
Prefix Length (0 to 128)
64
Yes
No
Port (Specify by Port Number, Specify by Service Name)
Specify by Port Number
Yes
No
Specify by Port Number(Local Port(All Ports, Single Port), Remote Port(All Ports, Single Port))
All Ports
Yes
No
Single Port (1 to 65535)
0
Yes
No
Specify by Service Name
Service On/Off: On, Off
Off
Yes
No
[IKE Settings]
IKE Mode: Main, Aggressive
Main
Yes
No
Authentication Method: Pre-Shared Key Method (Shared Key), Digital Sig. Method (Key and Certificate)
Pre-Shared Key Method
Yes
No
Key and Certificate:
Set as the Default Key
-
Yes
No
Certificate Details(Version, Serial Number, Signature Algorithm, Issued To, Validity Start Date, Validity End Date, Issuer, Public Key, Certificate Thumbprint, Verify Cert.)
-
Yes
No
Display Use Location (Key and Certificate)
-
Yes
No
Auth./Encryption Algorithm
(Auto, Manual Settings)
Auto
Yes
No
Auth./Encryption Algorithm: Manual Settings
Authentication
SHA1: On, Off
On
Yes
No
SHA2: On, Off
On
Yes
No
Encryption
3DES-CBC: On, Off
On
Yes
No
AES-CBC: On, Off
Off
Yes
No
DH Group:
Group 1 (768), Group 2 (1024), Group 14 (2048), ECDH-P256, ECDH-P384
Group 2 (1024)
Yes
No
[IPSec Network Settings]
Validity
Time: On, Off
On,
Yes
No
On: (1 to 65535 min.)
480 min.
Yes
No
Validity
Size: On, Off
Off
Yes
No
On: (1 to 65535 MB)
0 MB
Yes
No
PFS: On, Off
Off
Yes
No
Auth./Encryption Algorithm
: Auto, Manual Settings
Auto
Yes
No
Auth./Encryption Algorithm: Manual Settings(ESP, ESP (AES-GCM), AH (SHA1))
ESP
Yes
No
ESP Settings:
ESP Auth.
SHA1: On, Off
On
Yes
No
NULL: On, Off
Off
Yes
No
ESP Encryption
3DES-CBC: On, Off
On
Yes
No
AES-CBC: On, Off
Off
Yes
No
NULL: On, Off
Off
Yes
No
ESP (AES-GCM) Settings: None
-
Yes
No
AH (SHA1) Settings: None
-
Yes
No
Connect. Mode
Transport (display only)
-
No
No
[Edit]
-
-
Yes
No
[Delete]
-
-
Yes
No
[Print List]
Yes, No
-
No
NetWare Settings (See "Protocol Settings.")
Item
Setting Description
Default
Setting
Can be set in
Remote UI
Device Information
Delivery Available
[NetWare Settings]
<Use NetWare>
On, Off
Off
Yes
Yes
<Frame Type>
Auto Detect, Ethernet II, Ethernet 802.2, Ethernet 802.3, Ethernet SNAP
Auto Detect
Yes
No
<IPX External Network Number>
Auto (display only)
-
No
No
<Node Number>
Auto (display only)
-
No
No
<Print Service>
Bindery PServer, RPrinter, NDS PServer, NPrinter
NDS PServer
Yes
No
<Packet Signature>
Auto (display only)
-
No
No
[Bindery PServer]
Print Server Name
(NULL)
Yes
No
File Server Name
(NULL)
Yes
No
Print Server Password
(NULL)
Yes
No
Printer Number: 0 to 15
0
Yes
No
Polling Interval: 1 to 15 sec.
5 sec.
Yes
No
Printer Form: 0 to 255
0
Yes
No
Buffer Size: 1 to 20 KB
20 KB
Yes
No
Service Mode: Minimize form changes within print queues, Minimize form changes across print queues, Change forms as needed, Service only currently mounted form
Minimize form changes within print queues
Yes
No
[RPrinter]
Print Server Name
(NULL)
Yes
No
File Server Name
(NULL)
Yes
No
Printer Number: 0 to 15
0
Yes
No
[NDS PServer]
Print Server Name
(NULL)
Yes
No
Tree Name
(NULL)
Yes
No
Context Name
(NULL)
Yes
No
Print Server Password
(NULL)
Yes
No
Printer Number: 0 to 254
0
Yes
No
Polling Interval: 1 to 255 sec.
5 sec.
Yes
No
Printer Form: 0 to 255
0
Yes
No
Buffer Size: 3 to 20 KB
20 KB
Yes
No
Service Mode: Minimize form changes within print queues, Minimize form changes across print queues, Change forms as needed, Service only currently mounted form
Minimize form changes within print queues
Yes
No
[NPrinter]
Print Server Name
(NULL)
Yes
No
Tree Name
(NULL)
Yes
No
Context Name
(NULL)
Yes
No
Printer Number: 0 to 254
0
Yes
No
AppleTalk Settings (See "Protocol Settings.")
Item
Setting Description
Default Setting
Can be set in
Remote UI
Device Information
Delivery Available
[AppleTalk Settings]
<Use AppleTalk>
On, Off
Off
Yes
Yes
<Phase>
Phase 2 (display only)
-
No
No
[Service Name]
Name
Device Name
Yes
No
[Zone]
Zone
*
Yes
No
<Print Mode>*1
Both, Spool, Direct
Both
Yes
No
*1
The imagePRESS Printer Kit may be required to display this item.
SMB Server Settings (See "Protocol Settings.")
Item
Setting Description
Default Setting
Can be set in
Remote UI
Device Information Delivery Available
[SMB Server Settings]
<Use SMB Server>
On, Off
Off
Yes
No
[Server Name]
Server Name
Canon****** ("******" represents the last six digits of a MAC address.)
Yes
No
[Workgroup Name]
Workgroup Name
WORKGROUP
Yes
No
[Comment]
Comment
(NULL)
Yes
No
<LM Announce>
On, Off
Off
Yes
No
[Set SMB Printer]
Use SMB: On, Off
Off
Yes
No
Printer Name
PRINTER
Yes
No
SNMP Settings (See "Communication Environment Setup.")
Item
Setting Description
Default Setting
Can be set in
Remote UI
Device Information
Delivery Available
[SNMP Settings]
<Use SNMPv1>
On, Off
On
Yes
Yes
[Dedicated Comm. Settings]
Dedicated Community: On, Off
On
Yes
No
MIB Access Permission: Read/Write, Read Only
Read/Write
Yes
No
[Set Community Name 1]
Community Name 1: On, Off
On
Yes
No
MIB Access Permission: Read/Write, Read Only
Read Only
Yes
No
Community Name
public
Yes
No
[Set Community Name 2]
Community Name 2: On, Off
Off
Yes
No
MIB Access Permission: Read/Write, Read Only
Read Only
Yes
No
Community Name
public2
Yes
No
<Use SNMPv3>
On, Off
Off
Yes
No
[User Settings]
User On/Off: On, Off
On
Yes
No
Register (User Name, MIB Access Permis. (Read/Write, Read Only), Security Settings (Auth. Yes/Encry. Yes, Auth. Yes/Encry. No, Auth. No/Encrypt. No), Authent. Algorithm (MD5, SHA1), Authent. Password, Encryption Algorithm (DES, AES), Encryption Password)
-
Yes
No
Details/Edit (User Name, MIB Access Permis. (Read/Write, Read Only), Security Settings (Auth. Yes/Encry. Yes, Auth. Yes/Encry. No, Auth. No/Encrypt. No), Authent. Algorithm (MD5, SHA1), Authent. Password, Encryption Algorithm (DES, AES), Encryption Password)
-
Yes
No
Delete
-
Yes
No
[Context Settings]
Register (Context name)
-
Yes
No
Edit (Context name)
-
Yes
No
Delete
-
Yes
No
<Retrieve Printer Mgmt. Info. from Host>
On, Off
Off
Yes
Yes
<Reject SNMP Packets While in Sleep Mode>
On, Off
Off
Yes
No
Dedicated Port Settings (See "Communication Environment Setup.")
Item
Setting Description
Default Setting
Can be set in Remote UI
Device Information Delivery Available
[Dedicated Port Settings]
On, Off
On
Yes
Yes
Use Spool Function (See "Communication Environment Setup.")
Item
Setting Description
Default Setting
Can be set in Remote UI
Device Information Delivery Available
[Use Spool Function]
On, Off
Off
Yes
Yes
Waiting Time for Connection at Startup (See "Setting the Waiting Time for Connection at Startup.")
Item
Setting Description
Default Setting
Can be set in Remote UI
Device Information Delivery Available
[Waiting Time for Connection at Startup]
30 to 300 sec.
30 sec.
Yes
No
Ethernet Driver Settings (See "Interface Settings.")
Item
Setting Description
Default
Setting
Can be set in
Remote UI
Device Information
Delivery Available
[Ethernet Driver Settings]
<Auto Detect>
On, Off
On
Yes
No
<Communication Mode>
Off: Half Duplex, Full Duplex
Half Duplex
Yes
No
<Ethernet Type>
Off: 10BASE-T, 100BASE-TX, 1000BASE-T
10BASE-T
Yes
No
<MAC Address>
Display only
-
No
No
IEEE 802.1X Settings (See "Selecting the IEEE 802.1X Authentication Method.")
Item
Setting Description
Default
Setting
Can be set in
Remote UI
Device Information
Delivery Available
[IEEE 802.1X Settings]
<Use IEEE 802.1X>
On, Off
Off
Yes
No
[Login Name]
Login Name
(NULL)
Yes
No
<Use TLS>
On, Off
Off
Yes
No
[Key and Certificate]
Set as the Default Key
-
Yes
No
Certificate Details (Version, Serial Number, Signature Algorithm, Issued To, Validity Start Date, Validity End Date, Issuer, Public Key, Certificate Thumbprint, Verify Cert.)
-
Yes
No
Display Use Location (Key and Certificate)
-
Yes
No
<Use TTLS>
On, Off
Off
Yes
No
TTLS Settings (TTLS Protocol): MSCHAPv2, PAP
MSCHAPv2
Yes
No
<Use PEAP>
On, Off
Off
Yes
No
[User Name]
Name of the user to be authenticated with IEEE 802.1X authentication
(NULL)
Yes
No
[Password]
Password of the user to be authenticated with IEEE 802.1X authentication
(NULL)
Yes
No
[Same User Name as Login Name]
On, Off
On
Yes
No
Firewall Settings: IPv4 Address Filter (See "TCP/IPv4 Settings.")
Item
Setting Description
Default
Setting
Can be set in
Remote UI
Device Information
Delivery Available
[IPv4 Address Filter]
[Outbound Filter]
Use Filter: On, Off
Off
Yes
No
Default Policy: Allow, Reject
Allow
Yes
No
Register (Up to 16 IPv4 addresses), Edit, Delete
-
Yes
No
Register
Single Address, Address Range (First Address, Last Address), Specify Prefix (Address, Prefix Length)
Single Address
Yes
No
Prefix Length (0 to 32)
-
Yes
No
[Inbound Filter]
Use Filter: On, Off
Off
Yes
No
Default Policy: Allow, Reject
Allow
Yes
No
Register (Up to 16 IPv4 addresses), Edit, Delete
-
Yes
No
Register
Single Address, Address Range (First Address, Last Address), Specify Prefix (Address, Prefix Length), Port Number (Do Not Specify, Specify)
Single Address
Yes
No
Prefix Length (0 to 32)
-
Yes
No
Firewall Settings: IPv6 Address Filter (See "TCP/IPv6 Settings.")
Item
Setting Description
Default
Setting
Can be set in
Remote UI
Device Information
Delivery Available
[IPv6 Address Filter]
[Outbound Filter]
Use Filter: On, Off
Off
Yes
No
Default Policy: Allow, Reject
Allow
Yes
No
Register (Up to 16 IPv4 addresses), Edit, Delete
-
Yes
No
Register
Single Address (Address), Specify Prefix (IPv6 Prefix, Prefix Length)
Single Address
Yes
No
Prefix Length (0 to 128)
-
Yes
No
[Inbound Filter]
Use Filter: On, Off
Off
Yes
No
Default Policy: Allow, Reject
Allow
Yes
No
Register (Up to 16 IPv6 addresses), Edit, Delete
-
Yes
No
Register
Single Address (Address), Specify Prefix (IPv6 Prefix, Prefix Length), Port Number (Do Not Specify, Specify)
Single Address
Yes
No
Prefix Length (0 to 128)
-
Yes
No
Firewall Settings: MAC Address Filter (See "Settings Common to TCP/IPv4 and TCP/IPv6.")
Item
Setting Description
Default
Setting
Can be set in
Remote UI
Device Information
Delivery Available
[MAC Address Filter]
[Outbound Filter]
Use Filter: On, Off
Off
Yes
No
Default Policy: Allow, Reject
Allow
Yes
No
Register (Up to 100 Mac addresses), Edit, Delete
-
Yes
No
[Inbound Filter]
Use Filter: On, Off
Off
Yes
No
Default Policy: Allow, Reject
Allow
Yes
No
Register (Up to 100 Mac addresses), Edit, Delete
-
Yes
No
Firewall Settings: IP Address Block Log (See "Checking the Block Log.")
Item
Setting Description
Default
Setting
Can be set in
Remote UI
Device Information
Delivery Available
[IP Address Block Log]
Time, Type, IP Address, Port Number, Result
-
Yes
No

Preferences: External Interface

USB Settings (See "Using the USB Port.")
Item
Setting Description
Default
Setting
Can be set in
Remote UI
Device Information
Delivery Available
[USB Settings]
[Use as USB Device]
On, Off
On
Yes
Yes
[Use MEAP Driver for USB Input Device]
On, Off
Off
Yes
Yes
[Use MEAP Driver for USB Storage Device]
On, Off
Off
Yes
Yes

Preferences: Accessibility

Item
Setting Description
Default
Setting
Can be set in
Remote UI
Device Information
Delivery Available
[Key Repetition Settings]
Standard, Slightly Slow, Slow
Standard
No
No
[Reversed Display (Color)]
On, Off
Off
No
No

NOTE
Some items can be set using the Remote UI. Use the control panel of the device to set items which cannot be set using the Remote UI.
The names may be different on the Remote UI.
13U0-051