Adjusting the Volume

<Fax Tone>

Adjust the sound volume during a fax transmission.

Press [] or [] to highlight <On> (sound enabled) or <Off> (sound disabled), and then press [OK].
Proceed to step 5.

<Ring Tone>

Adjust the ring volume when receiving a fax.

<TX Done Tone>

Adjust the fax sound volume when sending is complete.

Press [] or [] to highlight <On> (sound enabled) or <Off> (sound disabled), and then press [OK].

If <Sound Only When Error Occurs> is selected, the machine makes a sound only if an error occurs.

Proceed to step 5.

<RX Done Tone>

Adjust the fax sound volume when receiving is complete.

<Scanning Done Tone>

Adjust the fax sound volume when scanning is complete.

<Entry Tone>

Specify whether or not the machine makes a sound when a key on the operation panel is pressed.

Press [] or [] to highlight <On> (sound enabled) or <Off> (sound disabled), and then press [OK].
Proceed to step 5.

<Entry Error Tone>

Specify whether or not the machine makes a sound when an invalid key is pressed.

<Warning Tone>

Specify whether or not the machine makes a sound when unexpected events occur, such as paper jams or improper operations.

<Job Done Tone>

Specify whether or not the machine makes a sound when a job is complete.

<Handset Volume>*

Select the handset sound volume when using the handset.

Press [] or [] to highlight <High> or <Low>, and then press [OK].

Proceed to step 6.