|
NOTE
|
Menu options in the following chart:Default settings are highlighted in bold.
For values with "*1" mark, the default value varies depending on the country where you are using the machine.
For settings or values with "*2" mark, the setting or value may be unavailable or vary depending on the country where you are using the machine.
|
|
Settings
|
Descriptions
|
|
|
Register Unit Name
|
Set your name or your company's name as the machine name (sender's name):
|
|
|
Register Unit Telephone Number
|
Set a fax number for the machine:
|
|
|
Select Line Type*2
|
Select a line type:
|
|
|
Public Line Connection
|
If the external telephone does not ring or you cannot make a call using the external telephone when the fax receive mode is set to <Fax/Tel Auto Switch>, set <Public Line Connection> settings to <Adapter 1> or <Adapter 2>:
|
|
|
Off-Hook Alarm
|
Set whether or not to sound an alarm when the telephone handset is off the hook and adjust the volume:
|
|
|
Sender ID
|
Set whether or not to add sender information to faxes. This helps the recipient to identify the sender:
|
|
|
Print Location
|
Select the location where the Sender ID is printed:
|
|
|
Mark No. as: TEL/FAX
|
Select the text to add in front of the number:
|
|
Settings
|
Descriptions
|
|
|
Change Defaults
|
Store new transmission settings:
|
|
|
ECM TX
|
Set whether or not to use the electronic correction mode:
"ECM TX"
|
|
|
Pause Time
|
Set a duration for pauses added to fax numbers:
|
|
|
Auto Redial
|
Set whether or not to automatically redial unconnected fax numbers:
|
|
|
Redial Times
|
Set the number of times to redial:
|
|
|
Redial Interval
|
Set the interval between redials:
|
|
|
Redial When Err Occurs
|
Set whether or not to redial when a send error occurs:
|
|
|
Check Dial Tone Before Sending
|
Set whether or not verify a dial tone before dialing fax numbers:
|