Printing Reports and Lists
You can check the condition of consumables and the machine settings by printing reports and lists.
|
|
Asterisks (*)Settings marked with "*1" are not displayed depending on whether an optional SD card is installed on the machine.
Settings marked with "*2" are not displayed when [Display Job Log] check box of the Remote UI is not selected. Hiding the Print Job History
|
Configuration Page
You can check the machine settings (Setup Menu), the contents registered in the machine, and other information in list form. The other information includes the amount of remaining toner, the number of printed pages, and the capacity of the memory (RAM) mounted on the machine. Setting items whose name is preceded by an asterisk (*) are the items whose setting was changed from the factory default.
(
) 
<Configuration Page> 
<Yes> Example:
Network Status Print
You can check the settings about the network configured in the machine (Network) in list form. The information about the security including the address filter settings and IPSec settings is also printed.
() <Network Status Print> <Yes> Example:
Consmbl. Status Prt.
The information such as toner remaining amount, warning messages, and information on where you can purchase new toner cartridges can be viewed in list form.
() <Consmbl. Status Prt.> <Yes> Example:
IPSec Policy List
You can check the list of policy names and the IPSec settings registered in the machine by printing an IPSec Policy List.
() <IPSec Policy List> <Yes> Example:
E-Mail RX Log List
You can check a log consisting of subjects and received date/time of e-mails received in the machine in list form.
() <E-Mail Print Utility> <E-Mail RX Log List> <Yes> Example:
Page Count List
You can check the number of pages printed for each department by printing a report when [Department ID Management] is enabled.
() <Page Count List> <Yes> Example:
Counter Report
You can print an aggregate report of the number of pages printed for each counter.
() <Counter Report> <Yes> Example:
Print MEAP Sys. Info
You can check the information about MEAP applications installed in the machine and the MEAP system applications in list form if the MEAP function is enabled.
() <Print MEAP Sys. Info> <Yes> Example:
PCL Font List
You can check the fonts available in PCL mode in list form. Font Samples
() <PCL Utility> <Font List> <Yes> Example:
PS Mode List
The settings for use of the PS mode and the internal information items registered in the machine are printed in list form.
Configuration Page
You can check the machine settings (PS) and the contents registered in the machine in list form.
() <PS Utility> <Configuration Page> <Yes> Example:
Font List
You can check the fonts available in PS mode in list form.
() <PS Utility> <Font List> <Yes> Example:
Stored Job List *1
You can print a list of documents stored in the SD card installed on the machine.
(
) <Stored Job List> <Yes> Example:
Job Print Log *2
You can print a log of documents printed from the computer in list from.
() <Job Print Log> <Yes> Example:
Stored Job Print Log *1*2
You can print a print log of documents stored in the SD card installed on the machine in list form.
() <Stored Job Print Log> <Yes> Example:
Report Print Log *2
You can print the settings and a print log of reports in list form.
() <Report Print Log> <Yes> Example:
E-Mail Print Log *2
You can print a print log of received e-mails in list form.
() <E-Mail Print Log> <Yes> Example:
