Setting a Remote UI PIN
You can set a PIN for access to the Remote UI. All users use a common PIN.
|
When Department ID Management is enabled, setting here is not required. Setting the Department ID Management
|
1
Press 
(
).
().2
Use 
/
to select <Network>, and press 
.
/ to select <Network>, and press .When a message appears, press .
.3
Select <Remote UI Settings> 
<RUI Access Sec. Set.>.
<RUI Access Sec. Set.>.4
Select <On>, and press .
.
5
Select <Remote UI Access PIN>, and press .
.6
Set a PIN.
Enter up to 7 digits and press .
.As <Confirm PIN> is displayed for confirmation, enter again the same PIN digits.
If Remote UI settings are initializedThe Remote UI Access PIN is also initialized. After an initialization, reset the PIN. Initializing Menu
|