Fouten in verband met pagina [Enhanced System Application Management]

The currently set login service
Login services that will be enabled after the device is restarted
Default Authentication login services
The currently set login service can be uninstalled after the device is restarted.>
Cannot start this application because there is no distributable software in the application. Get a distributable software.
Probleem
De applicatie kan niet worden opgestart omdat het geen opnieuw distribueerbare modules bevat.
Maatregelen
Neem contact op met de applicatie-ontwikkelaar.
Cannot start this application because the number of bootable applets has exceeded the limit. Start this application after stopping other applications.
Probleem
De applicatie die u probeert te starten bevat applets. Als de applicatie zou worden opgestart, dan zou het aantal applets dat wordt geboot op het systeem de limiet (vijf applets) overschrijdem, dus de applicatie kan niet worden opgestart.
Maatregelen
Verlaag ten eerste het aantal applets dat op het systeem loopt door een applicatie te stoppen die op het systeem loopt met een applet, en start de applicatie vervolgens opnieuw.
Cannot start this application because system resources (memory, threads, sockets, file descriptors, disk space, or screen size) required to start the application may not be available. <Bronnen>
Probleem
De applicatie kan niet worden opgestart om de systeembronnen voor het openen van de applicatie niet kunnen worden toegewezen.
Maatregelen
Start deze applicatie opnieuw nadat andere applicaties zijn gestopt. Het is mogelijk dat de applicatie nu wel opstart.
The name listed in the file for the application and the applet name to register with Applet Viewer Service are different. Check the file.
Probleem
De applicatie kan niet worden opgestart omdat de appletnaam die de applicatie probeert te registreren in de Applet Viewer Service anders is dan de appletnaam in het applicatiebestand.
Maatregelen
Neem contact op met de applicatie-ontwikkelaar want er moeten correcties worden uitgevoerd aan het applicatiebestand.
The following login services cannot be uninstalled:
 - The currently set login service
 - Login services that will be enabled after the device is restarted
 - Default Authentication login services
The currently set login service can be uninstalled after the device is restarted.
Probleem
De momenteel ingestelde loginservice, een loginservice die wordt ingeschakeld nadat de machine opnieuw is opgestart en de standaardverificatie loginservice kan niet worden gedeïnstalleerd.
Maatregelen
Deïnstalleer de momenteel ingestelde loginservice, een loginservice die wordt ingeschakeld nadat de machine opnieuw is opgestart of de standaardverificatie loginservice. Om de momenteel ingestelde loginservice te deïnstalleren, moet het worden gedeïnstalleerd nadat de machine opnieuw is opgestart.
The file for the application to install does not exist or the file path is incorrect. Try to specify the path again.
Probleem
Het gespecificeerde bestand bestaat niet of het bestandspad is niet juist.
Maatregelen
Geef het juiste bestandspad op.
The manifest is not listed in the specified file. Check the file.
Probleem
Er bestaat geen manifest voor het opgegeven bestand als het applicatiebestand.
Maatregelen
Deze applicatie kan niet worden geïnstalleerd. Neem contact op met de applicatie-ontwikkelaar.
The file for the license to install does not exist or the file path is incorrect. Try to specify the path again.
Probleem
Het gespecificeerde bestand bestaat niet of het bestandspad is niet juist.
Maatregelen
Geef het juiste bestandspad op.
The contents of the file for the application to install are incorrect or information is missing. Check the file.
Probleem
Of de inhoud van de opgegeven bestanden als applicatiebestanden zijn onjuist of er ontbreekt informatie.
Maatregelen
Dit applicatiebestand kan niet worden geïnstalleerd. Controleer het bestand. Als er geen problemen zijn met de bestanden, neem dan contact op met de applicatie-ontwikkelaar of de support helpdesk van de applicatie.
The contents of the file for the license to install are incorrect or information is missing. Check the file.
Probleem
Of de inhoud van de opgegeven bestanden als licentiebestanden zijn onjuist of er ontbreekt informatie.
Maatregelen
Dit licentiebestand kan niet worden geïnstalleerd. Controleer het bestand. Als er geen problemen zijn met de bestanden, neem dan contact op met de applicatie-ontwikkelaar of de support helpdesk van de applicatie.
Cannot install this application because a code signing has not been confirmed to be valid. Get a valid code signing.
Probleem 1
Kan niet bevestigen dat er een geldige gecodeerde handtekening is in het applicatiebestand.
Maatregelen
Voer de juiste handeling uit voor de gecodeerde handtekening voor de applicatie.
Probleem 2
Het bestand kan gewijzigd zijn.
Maatregelen
Neem contact op met de applicatie-ontwikkelaar.
Cannot install this license because the specified application and license do not correspond. Try to specify a path for the license file again.
Probleem
De applicatie kan niet worden geïnstalleerd omdat het opgegeven licentiebestand niet overeenkomt met de opgegeven applicatie.
Maatregelen
Geef het licentiebestand op dat overeenkomt met de applicatie.
The specified file is not system application. Check the file.
Probleem
Het opgegeven bestand is geen systeemapplicatie. Het kan niet worden geïnstalleerd van de pagina [Enhanced System Application Management].
Maatregelen
Installeer het van de pagina [Install MEAP Application].
Cannot install this license because the number of license file ID logs that can be saved has exceeded the limit. Contact your service representative.
Probleem
Het licentiebestand kan niet worden geïnstalleerd omdat het aantal ID-informatielogs van licentiebestanden het aantal overschrijdt dat kan worden opgeslagen.
Maatregelen
Neem contact op met uw bevoegde Canon-dealer of verkoopvertegenwoordiger.
Cannot install because a used license file is specified. Try to specify the file again.
Probleem
Licentiebestanden die al een keer zijn geïnstalleerd kunnen niet nog een keer worden geïnstalleerd. Het opgegeven licentiebestand is al geïnstalleerd.
Maatregelen
Geef een ander bestand op aangezien het opgegeven licentiebestand niet kan worden geïnstalleerd.
To install the specified application, a license file must be installed at the same time. Specify a license file.
Probleem
U kunt de applicatie niet installeren tenzij u gelijktijdig het licentiebestand opgeeft dat overeenkomt met de applicatie.
Maatregelen
Geef het bijbehorende licentiebestand op als de applicatie wordt opgegeven en installeer ze vervolgens.
The following information in the specified application is incorrect. Check the file. <Onvolledige informatie>
Probleem 1
<Onvolledige informatie> in het applicatiebestand kan niet worden herkend als juiste informatie.
Maatregelen
Neem contact op met de applicatie-ontwikkelaar of de support helpdesk van de applicatie.
Probleem 2
Als de <Onvolledige informatie> de MEAP-specificaties is, dan komen de MEAP-specificatiewaarden van de applicatie en de MEAP-specificatiewaarden van de printer niet overeen.
Maatregelen
Neem contact op met uw bevoegde Canon-dealer of verkoopvertegenwoordiger.
The following information is missing in file for the specified application. Check the file. <Ontbrekende informatie>
Probleem
De applicatie kan niet worden geïnstalleerd omdat de benodigde informatie niet is opgenomen in de applicatie.
Maatregelen
Controleer het bestand. Als er geen problemen zijn met de bestanden, neem dan contact op met de applicatie-ontwikkelaar of de support helpdesk van de applicatie over de <Ontbrekende informatie>.
The specified application does not support this device.
Probleem
Sommige applicaties kunnen alleen worden geïnstalleerd in bepaalde printermodellen. Het kan niet worden geïnstalleerd in dit model.
Maatregelen
Geef een applicatie op die deze printer ondersteunt.
The specified license does not match this device. Specify an installable license.
Probleem
Licentiebestanden bevatten een serienummer van printers waarin het licentiebestand kan worden geïnstalleerd. De opgegeven licentie kan niet worden geïnstalleerd omdat het niet het serienummer van de printer bevat.
Maatregelen
Geef een licentiebestand op dat overeenkomt met het serienummer van deze printer.
Cannot install this application because an applet included in the specified application has exceeded the area that can be displayed in the device panel.
Probleem
De applicatie kan niet worden geïnstalleerd omdat het weergavedeel van een applet opgenomen in de applicatie het deel overschrijdt dat kan worden weergegeven in het bedieningspaneel van de printer.
Maatregelen
Installeer een applicatie die applets bevat die deze printer ondersteunen.
The specified file is an update file. Stop the application that you want update and then install the file.
Probleem
Het opgegeven applicatiebestand is een bestand voor het updaten van een applicatie die al is geïnstalleerd. De applicatie die moet worden bijgewerkt moet gestopt worden voor de update.
Maatregelen
Stop de applicatie die u wilt updaten en voer vervolgens de update weer uit.
The specified file is an update file for a login service that is currently set. Switch to another login service, restart the device, and then install the file.
Probleem
Hoewel het opgegeven applicatiebestan een updatebestand is voor de loginservice die momenteel is ingesteld, kan het geen loginservice bijwerken die al gestart is.
Maatregelen
Start om het updatebestand te installeren voor de loginservice een andere loginservice en installeer vervolgens het updatebestand.
Cannot install this application because storage space has been exceeded. Uninstall other applications and then try to install it again.
Probleem
De applicatie kan niet worden geïnstalleerd omdat er niet voldoende opslagcapaciteit vrij is.
Maatregelen
Maak opslagcapaciteit beschikbaar door een applicatie te deïnstalleren die niet wordt gebruikt.
Could not cancel installation. Installation has been successfully completed.
Probleem
De knop [Cancel] is ingedrukt toen de installatie niet kon worden geannuleerd.
Maatregelen
Schakel het licentiebestand uit, download het van de pagina [License Management] en deïnstalleer het.
The process is canceled because the system has been shut down. Restart the system, and then perform the process again.
Probleem
De installatie kon niet worden voltooid omdat het een conflict vormde met een uitschakeling van het systeem.
Maatregelen
Start de printer opnieuw op en voer de installatie opnieuw uit.
Cannot install the application or license because another application is being installed, or the firmware being updated. Please wait a moment and then try again.
Probleem
Het is of geïnstalleerd in een andere applicatie buiten SMS, of de applicatie kan niet worden geïnstalleerd omdat de firmware is bijgewerkt.
Maatregelen
Wacht tot de verwerking is gestopt voordat de applicatie wordt geïnstalleerd.
Error: <Foutdetails>
Probleem
Er is een fout opgetreden. Zie <Foutdetails> voor details.
Maatregelen
Als de oplossingen van <Foutdetails> onduidelijk zijn, neem dan contact op met uw plaatselijke dealer.
0YX1-01W