Printing from USB Memory (USB Direct Print)

You can print image files (PDF, TIFF, JPEG, and XPS) stored in a USB memory device by connecting it directly to the machine. Using this function, you can print without using a computer.

Available File Formats

You can print the following types of image files. However, some files cannot be printed depending on the file structure.

PDF file *

JPEG file

TIFF file

XPS file

* Version 1.7 is supported.


The maximum size of a printable file is 2 GB.

Available USB Memory Devices

You can use FAT32 formatted USB memory devices (memory capacity: up to 32 GB).


Do not use non-standard USB memory devices. You may not be able to print the files properly depending on the USB memory device. Do not connect anything other than a USB memory device. USB memory devices cannot be connected via a USB hub or an extension cable. Do not use USB memory devices with special functions such as built-in security functions.


The USB port of the machine supports USB 2.0. If a folder in a USB memory device has many files, scanning image files to print will take some considerable time. Use your computer to delete unnecessary files on your USB memory device or move them to a different folder.

Connect a USB memory device to the USB port on the right side of the machine.

The following screen is automatically displayed.

If the screen is not displayed, press

(

Do not shock or shake the USB memory device or the machine while the device is connected to the machine.

Use

to select <Select File(s)>, and press

Select the type of the file to print, and press

Select the file to print, and press

You can select up to 10 files.

To clear a selection, select the file you have selected (marked with

), and press

. To clear all selections, select <Clear All>, and press

To display the contents of a folder, select a folder, and press

. To return to the folder in the upper level, press

Folders and files in lower levels or with longer names may not be displayed.

When you move to another folder, the previous file selections will be cleared.

Select <Apply>, and press

When printing an XPS Document Using a Print Ticket

When a file to print is in XPS format, it can be printed according to the print ticket (print settings) attached to the file.

1	Select <Use Print Ticket>, and press .
2	Select <Start Printing>, and press . Printing starts. When the printing is finished, remove the USB memory device from the machine. Disconnect the USB memory device.

Specify the print settings as necessary.

Select the desired setting item, press

, and specify the setting.

Icons* in the description

Settings for printing PDF files

Settings for printing XPS files

Settings for printing JPEG files

Settings for printing TIFF files

* Icons are omitted for the settings that are displayed regardless of the file format.

<No. of Copies>

Specify the number of copies from 1 to 9999. Use the numeric keys to enter a quantity, and press

<Print Range>/<Print Range (TIFF)>

Specify the range (pages) to print. Use

to select <Designation Method>

select the method to designate the print range

<All>

Prints all pages.

<Specify Pages>

Prints only the specified pages. To specify the pages, select <Page Range>

enter <First Page> and <Last Page> using the numeric keys

select <Apply>

<Color Mode>

Specify whether to print in color or black and white. Use

to select the setting, and press

<Auto (Color/Black)>

Automatically select color or black and white printing depending on the type of document.

<Black>

Print in black and white even when the document is in color.

<2-Sided Printing>

Select whether to print on both sides of paper. Use

to select the setting, and press

<2-Sided Printing> may not be available with some sizes or types of paper. Paper

<Binding Location>

Specify whether to bind the long edge or short edge of the 2-sided printouts with a binding tool such as a stapler. Use

to select the binding position, and press

<Long Edge>

Binds the printouts on the long edge.

<Short Edge>

Binds the printouts on the short edge.

<Select Paper>

Select the paper source in which the paper to print is already loaded. Use

to select the paper source, and press

When you want to print a PDF file or XPS file, specify <Auto> to automatically select the optimum paper source.

A paper source with custom size paper loaded cannot be selected.

<Halftones>

You can select the method to reproduce halftones (the intermediate range between the lighter and darker areas of an image).

PDF files and XPS files

You can specify <Error Diffusion> as the halftone reproduction method or specify the halftone reproduction method separately for each image data type. To specify <Error Diffusion>, use

to select <Error Diffusion>

press

<On>

press

. To specify the reproduction method separately for each image data type, use

to select <Resolution/Gradation>

press

select the image data type

press

select the method to reproduce halftone

press

<Error Diffusion>

This mode is suitable for printing data with text and thin lines and the curved lines of CAD data, etc.

The stability of the texture and fixed toner may be reduced when <Error Diffusion> is used.

<Resolution/Gradation>

Select the halftone reproduction method when <Error Diffusion> is set to <Off>. You can make this setting for each of the types of image contained in one document.

Type of image

Select the type of image for which you want to change the setting. <Text> represents letters and characters, <Graphics> represents lines and figures, and <Image> represents photos and other types of images.

Prints text with clear edges to produce a fine print. This is suitable for printing text and thin lines.

Prints gradations and outlines with a smooth finish. This is suitable for printing figures and graphs that use gradations.

When <Error Diffusion> is set to <On>, <Resolution/Gradation> is not displayed.

JPEG files and TIFF files

Use

to select the method to reproduce halftones, and press

<Error Diffusion>

This mode is suitable for printing data with text and thin lines and the curved lines of CAD data, etc.

The stability of the texture and fixed toner may be reduced when <Error Diffusion> is used.

<Resolution>

Prints text with clear edges to produce a fine print. This is suitable for printing text and thin lines.

<Gradation>

Prints gradations and outlines with a smooth finish. This is suitable for printing figures and graphs that use gradations.

<Match Paper Size>

Automatically makes enlarged or reduced printouts according to the Printable Area of the paper. The printouts are enlarged or reduced with the original's aspect ratio kept. Use

to select the setting, and press

This setting is not available if <Auto> is set in <Select Paper>.

<Zoom>

Enable or disable enlarging/reducing images. The printouts are enlarged or reduced with the image's aspect ratio kept. Use

to select the setting, and press

<Off>

When the image is within the Printable Area of the paper, it is printed with the size as is. When an image is larger than the printable area, printouts are reduced.

<Auto>

Makes enlarged or reduced printouts according to the Printable Area.

<Enlarge Print Area>

Specify whether or not to print the image by extending the Printable Area fully to the paper size. Use

to select the setting, and press

If you select <On>, some portions of the image may be missing near the edge of the paper or the paper may be partly tainted depending on the original.

<N on 1>

Select whether to print multiple pages onto a single sheet by sequentially allocating them from the top left. For example, to print four pages onto a single sheet, select <4 on 1>. Use

to select the setting, and press

This setting is not available if <Auto> is set in <Select Paper>.

<Finishing>

Specify the method to collate the printouts when printing multiple-page documents. Use

to select whether or not to collate the printouts, and press

<Off>

The printouts are not collated. The specified number of copies are printed for each page. For example, if you are printing three copies of a four-page document, the printouts will be arranged in the following page order: 1, 1, 1, 2, 2, 2, 3, 3, 3, 4, 4, 4.

<Collate>

The printouts are grouped into complete sets in sequential page order. For example, if you are printing three copies of a four-page document, the printouts will be arranged in the following page order: 1, 2, 3, 4, 1, 2, 3, 4, 1, 2, 3, 4.

<Image Orientation>

Specify the print orientation of an image. Use

to select the print orientation, and press

<Auto>

Automatically determines the print orientation based on the width and height of the image.

<Vertical>

Select when printing a vertically-long image.

<Horizontal>

Select when printing a horizontally-long image.

If the specified setting of <Vertical> or <Horizontal> does not match the orientation of the image, the reduced image is printed.

<Print Position>

Specify the position to print the image. Use

to select the print position, and press

<Auto>

If the TIFF data contains the information that specifies the print position, the image is printed according to the information, otherwise, it is printed at the center of paper. JPEG data is always printed at the center of paper.

<Center>

Images are printed at the center of paper.

<Top Left>

Images are printed at the top left.

Select <Start Printing>, and press

Printing starts.

To cancel printing, use the operation panel. Canceling Prints

Disconnect the USB memory device.

1	Select <Remove USB Memory>, and press .
2	Select <Yes>, and press . Wait until the message shown below appears.
3	Disconnect the USB memory device.


If you select <Sort Files> on the screen in step 1, you can change the order of displaying files when you select the file to print.

TIPS
If you always want to print with the same settings:Changing Default USB Print Settings