System Management Settings
 |
|
All the settings about System Management Settings are listed with short descriptions. Default settings are marked with a dagger (
 ). |
 |
Asterisks (*)Settings marked with "*1" cannot be imported or exported.
Settings marked with "*2" have different defaults depending on the country or region of purchase.
Settings marked with "*3" are only available for the LBP252dw.
|
Network Settings
See Network Settings.
System Manager Information Settings
Specify the ID or PIN exclusively for Administrators who have access privileges to <Network Settings> and <System Management Settings>. ID is <System Manager ID> and PIN is <System Manager PIN>. You can also register the name of an Administrator. Setting the System Manager ID
System Manager ID and PIN
Enter a number of up to seven digits for the System Manager ID and PIN.
|
System Manager ID
System Manager PIN
|
System Manager Name
Enter up to 32 alphanumeric characters for the name of an Administrator.
Device Information Settings
Enter up to 32 alphanumeric characters for the name and the installation location to identify the machine.
|
Device Name
Location
|
<System Management Settings> 
<Device Information Settings> Select <Device Name> or <Location> Enter <Device Name> or <Location> (Entering Text) 
Department ID Management On/Off
Select whether to use the Department ID Management, a feature that uses IDs as user accounts to specify access privileges and maintain information on how the machine is used. Setting the Department ID Management
|
Off
On
|
<System Management Settings> <Department ID Management On/Off> Select <Off> or <On> Security Settings
Enable or disable settings for encrypted communication via TLS or IPSec, as well as settings for IP address or MAC address packet filtering.
Use TLS *1
Select whether to use TLS encrypted communication. Enabling TLS Encrypted Communication for the Remote UI
|
Off
On
|
<System Management Settings> <Security Settings> <Use TLS> Select <Off> or <On> Restart the machineUse IPSec *1
Select whether to perform encrypted communication by establishing a virtual private network (VPN) via IPSec. Configuring IPSec Settings
|
Off
On
|
<System Management Settings> <Security Settings> <Use IPSec> Select <Off> or <On> Restart the machineIPv4 Address Filter
Enable or disable settings for filtering packets sent to or received from devices with specified IPv4 addresses. Specifying IP Addresses for Firewall Rules
|
Outbound Filter
Off
On
Inbound Filter
Off
On
|
<System Management Settings> <Security Settings> <IPv4 Address Filter> Select <Outbound Filter> or <Inbound Filter> Select <Off> or <On> Restart the machineIPv6 Address Filter
Enable or disable settings for filtering packets sent to or received from devices with specified IPv6 addresses. Specifying IP Addresses for Firewall Rules
|
Outbound Filter
Off
On
Inbound Filter
Off
On
|
<System Management Settings> <Security Settings> <IPv6 Address Filter> Select <Outbound Filter> or <Inbound Filter> Select <Off> or <On> Restart the machineMAC Address Filter
Enable or disable settings for filtering packets sent to or received from devices with specified MAC addresses. Specifying MAC Addresses for Firewall Rules
|
Outbound Filter
Off
On
Inbound Filter
Off
On
|
<System Management Settings> <Security Settings> <MAC Address Filter> Select <Outbound Filter> or <Inbound Filter> Select <Off> or <On> Restart the machineSelect Country/Region *1 *2
Specify the country or region where the machine is used. The default setting may vary depending on the setting selected at initial power-on.
|
<System Management Settings> <Select Country/Region> Select a country or region Remote UI Settings *1
Configure settings for using the Remote UI. Using the Remote UI allows you to configure machine settings from a Web browser.
Use Remote UI
Select whether to use the Remote UI. Using the Remote UI allows you to configure machine settings from a Web browser. Disabling Remote UI
|
Off
On
|
Remote UI Access Security Settings
Set whether a PIN is required for accessing the Remote UI. Set a PIN of up to 7 digits. All users use a common PIN. Setting a Remote UI PIN
|
Off
On Remote UI Access PIN
|
<System Management Settings> <Remote UI Settings> <Remote UI Access Security Settings> <On> Enter PIN <Apply> PIN (Confirm) <Apply> Display Job Log
Select whether to display the printing logs on the display of the machine.
|
Off
On
|
<System Management Settings> <Display Job Log> Select <Off> or <On> Restart the machineUse as USB Device
Enable or disable the USB port that is used for connecting the machine to a computer. Restricting USB Functions
|
Off
On
|
Enable Product Extended Survey Program
Enable or disable the Product Extended Survey Program (a program for the machine usage survey).
|
Off
On
|
<System Management Settings> <Enable Product Extended Survey Program> Select <Off> or <On> Restart the machineDisplay Consumables Information (RUI/Toner Status)
Set whether to display a button in the Remote UI or Toner Status for accessing the Web site for purchasing toner cartridges. Also set whether to use Toner Status.
|
Display Consumables Purchase Button (RUI)
Off
On
Toner Status Settings
Off
On
Displ. Consmbls. Purchase Btn.
Off
On
|
<System Management Settings> <Display Consumables Information (RUI/Toner Status)> Specify the settings 
<Display Consumables Purchase Button (RUI)>
Select <Off> to prevent a button that accesses sites for purchasing toner cartridges from being displayed in the Remote UI.
<Toner Status Settings>
If you do not want to use the toner cartridge level notification tool, select <Off>. To prevent a button that accesses sites for purchasing toner cartridges from being displayed in the toner cartridge level notification tool, select <On> and then <Off>.
Google Cloud Print Settings
Enable or disable Google Cloud Print. Changing Google Cloud Print Settings
|
Enable Google Cloud Print
Off
On
Google Cloud Print Registration Status
|
Notify to Check Paper Settings
Specify whether to display a message prompting you to check paper settings when loading the paper drawer into the machine.
|
Off
On
|
<System Management Settings> <Notify to Check Paper Settings> Select <Off> or <On> Restart the machineImport/Export of Settings *1
You can use a USB memory device to import and export settings data. Using a USB Memory Device to Save/Load Registered Data
|
Import
Export |
Secure Print Settings *3
Enable or disable Secure Print. Printing via Secure Print
|
Off
On
Secure Print Deletion Time
10 to 30
to 240 (min.) |
PDL Selection (Plug and Play)
Select a page description language so that the machine is detected as a printer that is compatible with that language when it is connected to a computer by using Plug and Play.
Network *1
Select a page description language so that the machine is detected as a printer that is compatible with that language when it is detected over the network.
|
UFR II
UFR II (V4)
PCL5
PCL6
PS *3
|
USB
Select a page description language so that the machine is detected as a printer that is compatible with that language when it is connected to a computer via USB.
|
UFR II
UFR II (V4)
PCL5
PCL6
PS *3
|
<System Management Settings> <PDL Selection (Plug and Play)> Select <Network> or <USB> Select a page description language Restart the machine
<UFR II>
Detects and connects the machine as a UFR II printer.
<UFR II (V4)>
Detects and connects the machine as a UFR II printer that is compatible with XML Paper Specification (XPS).
<PCL5>
Detects and connects the machine as a PCL5 printer.
<PCL6>
Detects and connects the machine as a PCL6 printer.
<PS>
Detects and connects the machine as a PS printer.
Update Firmware *1
Select how to install the firmware update according to the environment of the machine.
<Via PC>
Select to manually install the firmware update available on the Canon Web site yourself. For instructions on how to install the update, see the instruction manual available on the Web site. When the machine uses a wireless LAN, update with <Via PC> below or use a USB cable to connect.
<Via Internet>
Select to automatically install the firmware update without using a computer. Follow the on-screen instructions to perform the update. The machine must be connected to the Internet.
<Version Information>
Select to check details for the current firmware.
|
Via PC
Via Internet
Version Information
|
Initialize Key and Certificate *1
Select to restore [Key and Certificate Settings] and [CA Certificate Settings] to the factory defaults. Initializing Key and Certificate
Initialize Menu *1
Select to restore the settings listed below to the factory defaults. You can restore all the settings listed below at once, or you can restore individual settings separately. Initializing Menu
|
Preferences
Timer Settings Common Settings Printer Settings System Management Settings Initialize All |
System Management Settings
Select to restore the System Management Settings to the factory defaults. You can restore all the System Management Settings at once. Initializing Menu
|
Initialize All Data/Settings
Initializes the area where data including logs and settings are stored. Perform this as necessary, for example in such cases as when you want to dispose of the machine after erasing all usage logs. When initializing is complete, the machine restarts automatically.
<System Management Settings> <Initialize All Data/Settings> <Yes>
 |
|
To use the machine after initializing, it is necessary to specify all settings again from scratch.
|