Viewing Network Settings

The IP address is not correctly configured if it is displayed as "0.0.0.0".
Connecting the machine to a switching hub or bridge may result in a connection failure even when the IP address is correctly configured. This problem can be solved by setting a certain interval before the machine starts communicating. Setting a Wait Time for Connecting to a Network
You can print a list of the current network settings. User Data List/System Manager Data List

Viewing IPv4 Settings

  <Network Information>    <IPv4>    Select the setting to view    Check the settings

Viewing IPv6 Settings

  <Network Information>    <IPv6>    Select the setting to view    Check the settings

Viewing the MAC Address for Wired LAN

1
Press .
2
Use / to select <Network Settings>, and press .
If the logon screen appears, enter the correct ID and PIN using the numeric keys, and then press Logging on to the Machine
3
Select <Ethernet Driver Settings>, and press .

Viewing the MAC Address and Information for Wireless LAN

1
Press .
2
Use / to select <Network Settings>, and press .
If the logon screen appears, enter the correct ID and PIN using the numeric keys, and then press . Logging on to the Machine
3
Select <Wireless LAN Settings>, and press .
4
Read the message that is displayed, and press .
5
Select <Connection Information>, and press .
6
Select the setting to view, and press .
Viewing WEP and WPA/WPA2-PSK information
1
Select <Security Settings>, and press .
2
Confirm the current security setting, and press .
If the security settings are not configured, <None> is displayed.
3
Select the setting to view, and press .
 
WEP
 
WPA/WPA2-PSK
 
 
 
 
 
<Wireless LAN Status> and <Latest Error Information> can be viewed from . Press   <Network Information>  <Network Connection Method>  <Connect. Info.> and select the setting to view.
0W20-037