Viewing Network Settings
|
|
|
The IP address is not correctly configured if it is displayed as "0.0.0.0".
Connecting the machine to a switching hub or bridge may result in a connection failure even when the IP address is correctly configured. This problem can be solved by setting a certain interval before the machine starts communicating. Setting a Wait Time for Connecting to a Network
You can print a list of the current network settings. User Data List/System Manager Data List
|
Viewing IPv4 Settings
<Network Information> 
<IPv4> Select the setting to view Check the settings
Viewing IPv6 Settings
<Network Information> <IPv6> Select the setting to view Check the settings
Viewing the MAC Address for Wired LAN
1
Press 
.
.2
Use 
/
to select <Network Settings>, and press .
/ to select <Network Settings>, and press .If the logon screen appears, enter the correct ID and PIN using the numeric keys, and then press 
. Logging on to the Machine
. Logging on to the Machine3
Select <Ethernet Driver Settings>, and press .
.
Viewing the MAC Address and Information for Wireless LAN
1
Press .
.2
Use / to select <Network Settings>, and press .
/ to select <Network Settings>, and press .If the logon screen appears, enter the correct ID and PIN using the numeric keys, and then press . Logging on to the Machine
. Logging on to the Machine3
Select <Wireless LAN Settings>, and press .
.4
Read the message that is displayed, and press .
.5
Select <Connection Information>, and press .
.6
Select the setting to view, and press .
.
Viewing WEP and WPA/WPA2-PSK information
|
1
|
Select <Security Settings>, and press
. |
||||||||
|
2
|
Confirm the current security setting, and press
.If the security settings are not configured, <None> is displayed.
|
||||||||
|
3
|
Select the setting to view, and press
.
|
<Wireless LAN Status> and <Latest Error Information> can be viewed from . Press <Network Information> <Network Connection Method> <Connect. Info.> and select the setting to view.
. Press <Network Information> <Network Connection Method> <Connect. Info.> and select the setting to view.