Viewing Network Settings

The IP address is not correctly configured if it is displayed as "0.0.0.0".
Connecting the machine to a switching hub or bridge may result in a connection failure even when the IP address is correctly configured. This problem can be solved by setting a certain interval before the machine starts communicating. Setting a Wait Time for Connecting to a Network
You can print a list of the current network settings. User Data List/System Manager Data List

Viewing IPv4 Settings

  <Network Information>  <IPv4>  Select the setting to view  Check the settings  

Viewing IPv6 Settings

  <Network Information>  <IPv6>  Select the setting to view  Check the settings  

Viewing the MAC Address for Wired LAN

1
Tap <Menu> in the Home screen.
2
Tap <Network Settings>.
If the logon screen appears, enter the correct ID and PIN using the numeric keys, and then press Logging on to the Machine
3
Tap <Ethernet Driver Settings>.

Viewing the MAC Address and Information for Wireless LAN

1
Tap <Menu> in the Home screen.
2
Tap <Network Settings>.
If the logon screen appears, enter the correct ID and PIN using the numeric keys, and then press . Logging on to the Machine
3
Tap <Wireless LAN Settings>.
If the <Do you want to enable the wireless LAN?> message is displayed, tap <Yes>.
4
Read the message that is displayed, and tap <OK>.
5
Tap <Connection Information>.
6
Select the setting to view.
Viewing WEP and WPA/WPA2-PSK information
1
Tap <Security Settings>.
2
Confirm and tap the current security setting.
If the security settings are not configured, <None> is displayed.
3
Select the setting to view.
 
WEP
 
WPA/WPA2-PSK
 
 
 
 
 
<Wireless LAN Status> and <Latest Error Information> can be viewed from . Press   <Network Information>  <Network Connection Method>  <Connect. Info.> and select the setting to view.
0UWX-07K