| User's Guide (Product Manual) | |
|---|---|
| User's Guide (Product Manual) | |
|---|---|
Portal TopManual topSetting UpBasic OperationsCopyingFaxingPrintingScanningUsing Storage SpaceLinking with Mobile DevicesManaging the MachineSettings/RegistrationMaintenanceTroubleshootingImplementing Security MeasuresAppendixThird Party SoftwareNoticeFeature HighlightsThe List of System Functions and ItemsMEAPBasic Windows OperationsSystem SpecificationsHardware SpecificationsOptionsOptional EquipmentFL CassetteCassette Feeding Unit-AMHigh Capacity Cassette Feeding Unit-APaper Deck Unit-FStaple Finisher-Y/Booklet Finisher-Y/Buffer Pass Unit-L/2/3 Hole Puncher Unit-A/2/4 Hole Puncher Unit-A (for the 230 V machine only)Inner Finisher-H/Inner 2/4 Hole Puncher-B/Inner 2/3 Hole Puncher-BCopy Tray-JInner 2way Tray-JPlaten Cover Type WPrinter Cover-JCopy Card ReaderADF Access Handle-ARemovable HDD KitOptional Equipment Supporting Specific FunctionsManuals and Their ContentsUsing User's Guide
Hard disk holder
Front cover |
A lock is not included with the "Removable HDD Kit." Purchase a lock that is commercially available for security. Note that Canon will not be liable for any damages resulting from the hard disk drive being stolen. |
 |
If you use the option together with the "HDD Mirroring Kit," you can store data onto two hard disks. System Options If the <E602-0001> message appears on the touch panel display when the machine starts, a hard disk may not be set in the hard disk holder. Turn OFF the machine and check that the main power indicator on the control panel is not lit, and then check whether the hard disk is set. If the error message still appears even though a hard disk is set, contact your local authorized Canon dealer. |
1 | Touch the discharging plate to eliminate static electricity, and then open the right cover of the machine. You can touch the discharging plate by inserting the tip of your hand through the recess handle of the right cover.  |
2 | Open the front cover of the Removable HDD Kit. If the front cover is locked, unlock the front cover beforehand.  |
3 | Hold the handle on the hard disk holder and being careful of the orientation, insert the holder.  |
4 | Close the front cover.  Lock the front cover if necessary.  |
5 | Close the right cover of the machine. |
1 | Touch the discharging plate to eliminate static electricity, and then open the right cover of the machine. You can touch the discharging plate by inserting the tip of your hand through the recess handle of the right cover. |
2 | Open the front cover of the Removable HDD Kit. If the front cover is locked, unlock the front cover beforehand.  |
3 | Hold the handle on the hard disk holder and remove the holder.  Store the hard disk holder with the circuit board of the HDD on the bottom. Do not store the hard disk holder in the upright position, as doing so may damage the holder.  |
4 | Close the front cover  Lock the front cover if necessary. |
5 | Close the right cover of the machine. |
