Switching 1-Sided and 2-Sided Printing
 |
|
If you are using the , you can make both 1-sided and 2-sided printouts.
|
 |
|
2-sided printing may not be available with some sizes and types of paper. See Paper.
This function can only be used when the optional Duplex Unit-C1 is attached.
|
[Basic Settings] tab 
Select [1-sided Printing] or [2-sided Printing] in [1-sided/2-sided/Booklet Printing] Select the position to bind in [Binding Location] [OK]
Select [1-sided Printing] or [2-sided Printing] in [1-sided/2-sided/Booklet Printing] Select the position to bind in [Binding Location] [OK]
[1-sided/2-sided/Booklet Printing]
Select [1-sided Printing] or [2-sided Printing].
For [Booklet Printing], see Printing Booklet.
[Binding Location]
Specify the position to bind the printouts with a binding tool such as a stapler. Printing orientation will be changed depending on the specified binding position. To specify the margin width for the binding position, click [Gutter].
[Long Edge [Left]]
Prints images in such a way that the printed pages are opened horizontally when bound.
Prints images in such a way that the printed pages are opened horizontally when bound.
[Short Edge [Top]]
Prints images in such a way that the printed pages are opened vertically when bound.
Prints images in such a way that the printed pages are opened vertically when bound.
[Gutter]
Specify a binding margin.
Specify a binding margin.
