Communication Management Report (imageRUNNER 2204F)
You can check the fax logs of sent and received documents by printing a Communication Management Report. The report can be printed automatically after every 40 transmissions, or you can print it manually.
|
|
|
You cannot select <Communication Management Report> if <Off> is set for <Display Job Log> in <System Management Settings>.
|
<Menu> 
<Output Rprt.> <Report Settings> <Communication Management Report> Select the print setting
<Output Rprt.> <Report Settings> <Communication Management Report> Select the print setting
<Auto Print (40 Transmissions)>
Tap <On> to print the report automatically after every 40 transmissions, or <Off> if you do not want to print the report automatically.
<Separate TX/RX>
Tap <On> to print sent and received reports separately, or <Off> to print both reports on one sheet.
Print the Report Manually
<Menu> <Output Rprt.> <Print List> <Communication Management Report> Check that the size and type of paper displayed on the screen is loaded in the machine <OK> <Yes>
<Output Rprt.> <Print List> <Communication Management Report> Check that the size and type of paper displayed on the screen is loaded in the machine <OK> <Yes>Example:
Result
"OK" indicates that the transmission was completed successfully while "NG" and three digits (an error code) indicates that the transmission failed (When an Error Code Appears).