Setting a Wait Time for Connecting to a Network
When a network is designed to enjoy redundant connectivity with multiple switching hubs or bridges, it must have a mechanism to prevent packets from looping. One effective solution is to define the role of each switch port. However, communication may still be disrupted for several tens of seconds immediately after you change the way that network devices are connected, or if you add a new device. If this type of problem occurs, set a wait time for connecting to the network.
1
Tap <Menu> in the Home Screen.
2
Tap <Network Settings>.
If a screen for entering a System Manager ID and PIN is displayed, enter the System Manager ID and PIN, tap <Apply>, and press 
. Setting the System Manager ID (imageRUNNER 2204F / 2204N / 2004N)
. Setting the System Manager ID (imageRUNNER 2204F / 2204N / 2004N)3
Tap <Waiting Time for Connection at Startup>.
4
Enter the wait time in seconds, and tap <Apply>.
Use 
/
or the numeric keys to enter the time.
/ or the numeric keys to enter the time.