Basic Windows Operations

Displaying the Printer Folder

Windows Vista
[Start]  select [Control Panel]  [Printer].
Windows 7/Server 2008 R2
[Start]  select [Devices and Printers].
Windows 8/Server 2012
Right-click the lower-left corner of the screen  select [Control Panel]  [View devices and printers].
Windows 8.1/Server 2012 R2
Right-click [Start]  select [Control Panel]  [View devices and printers].
Windows 10
Right-click [ select [Control Panel]  [Hardware and Sound]  [Devices and printers].
Windows Server 2003
[Start]  select [Printers and Faxes].
Windows Server 2008
[Start]  select [Control Panel]  double-click [Printers].

Enabling [Network discovery]

If you are using Windows Vista/7/8/10/Server 2008/Server 2012, enable [Network discovery] to view the computers on your network.
Windows Vista
[Start]  select [Control Panel]  [View network status and tasks]  select [Turn on network discovery] under [Network discovery].
Windows 7/Server 2008 R2
[Start]  select [Control Panel]  [View network status and tasks]  [Change advanced sharing settings]  select [Turn on network discovery] under [Network discovery].
Windows 8/Server 2012
Right-click the lower-left corner of the screen  select [Control Panel]  [View network status and tasks]  [Change advanced sharing settings]  select [Turn on network discovery] under [Network discovery].
Windows 8.1/Server 2012 R2
Right-click [Start]  select [Control Panel]  [View network status and tasks]  [Change advanced sharing settings]  select [Turn on network discovery] under [Network discovery].
Windows 10
Right-click [ select [Control Panel]  [View network status and tasks]  [Change advanced sharing settings]  select [Turn on network discovery] under [Network discovery].
Windows Server 2008
[Start]  select [Control Panel]  double-click [Network and Sharing Center]  select [Turn on network discovery] under [Network discovery].

Displaying Shared Printers in the Print Server

1
Open Windows Explorer.
Windows Vista/7/Server 2003/Server 2008
[Start]  select [All Programs] or [Programs]  [Accessories]  [Windows Explorer].
Windows 8/Server 2012
Right-click the lower-left corner of the screen  select [File Explorer].
Windows 8.1/Server 2012 R2
Right-click [Start]  select [File Explorer].
Windows 10
Click [ select [File Explorer].
2
Select [Network] or [My Network Places] in printer server.
To view computers on the network, you may need to turn on network discovery or search the network for computers.
Shared printers are displayed.
1

Displaying the [Software Programs/Manuals Setup] Screen

If your computer does not display the [Software Programs/Manuals Setup] screen after inserting the provided DVD-ROM, follow the procedure below. The DVD-ROM drive name is indicated as "D:" in this manual. The DVD-ROM drive name may differ depending on the computer you are using.
Windows Vista/7/Server 2008
[Start]  enter "D:\MInst.exe" in [Search programs and files] or [Start Search] press the [ENTER] key.
Windows 8/Server 2012
Right-click the lower-left corner of the screen [Run] enter "D:\MInst.exe" click [OK]
Windows 8.1/Server 2012 R2
Right-click [Start]  [Run] enter "D:\MInst.exe" click [OK]
Windows 10
Click [Search the web and Windows]  enter "D:\MInst.exe"  click "D:\MInst.exe" displayed in the search results
Windows Server 2003
[Start]  [Run]  enter "D:\MInst.exe"  click [OK]

Printing a Test Page in Windows

You can check whether the printer driver is operational by printing a test page in Windows.
1
Load Letter size paper in the multi-purpose tray. Loading Paper in the Manual Feed Slot
2
Open the printer folder. Displaying the Printer Folder
3
Right-click the printer driver icon for this machine and click [Printer properties] or [Properties].
4
Click [Print Test Page] in [General] tab.
The test page is printed.

Checking the Bit Architecture

If you are not sure whether your computer is running 32-bit or 64-bit Windows follow the procedure below.
1
Display [Control Panel].
Windows Vista/7/Server 2008
[Start]  select [Control Panel].
Windows 8/Server 2012
Right-click the lower-left corner of the screen  select [Control Panel].
Windows 8.1/Server 2012 R2
Right-click [Start]  select [Control Panel].
Windows 10
Proceed to step 2.
2
Display [System].
Windows Vista/7/8/Server 2008 R2/Server 2012
Click [System and Maintenance] or [System and Security]  [System].
Windows 10
Click [ select [Settings]  [System]  [About].
Windows Server 2008
Double-click [System].
3
Check the bit architecture.
For 32-bit versions
[32-bit Operating System] is displayed.
For 64-bit versions
[64-bit Operating System] is displayed.

Checking the Computer Name

Windows Vista/7/8/10/Server 2008/Server 2012
1
Display [Control Panel].
Windows Vista/7/Server 2008
[Start]  select [Control Panel].
Windows 8/Server 2012
Right-click the lower-left corner of the screen  select [Control Panel].
Windows 8.1/Server 2012 R2
Right-click [Start]  select [Control Panel].
Windows 10
Proceed to step 2.
2
Display [System].
Windows Vista/7/8/Server 2008 R2/Server 2012
Click [System and Maintenance] or [System and Security]  [System].
Windows 10
Click [ select [Settings]  [System]  [About].
Windows Server 2008
Double-click [System].
3
Check the computer name.
Windows Server 2003
1
[Start]  select [Control Panel]  [System].
2
Click [Change] in [Computer Name] tab.
3
Check the computer name.

Checking the Printer Port

1
Open the printer folder. Displaying the Printer Folder
2
Right-click the printer driver icon for this machine and click [Printer properties] or [Properties].
3
In the [Ports] tab, check that the port is selected correctly.
If you are using a network connection and have changed the machine's IP address
If [Description] for the selected port is [Canon MFNP Port], and the machine and the computer are on the same subnet, then the connection will be maintained. You do not need to add a new port. If it is [Standard TCP/IP Port], you need to add a new port. Configuring Printer Ports

Checking Bidirectional Communication

1
Open the printer folder. Displaying the Printer Folder
2
Right-click the printer driver icon for this machine and click [Printer properties] or [Properties].
3
In the [Ports] tab, make sure that the [Enable bidirectional support] check box is selected.

Checking the SSID to Which Your Computer Is Connected

If your computer is connected to a wireless LAN network, click , , or  in the system tray to display the SSID of the connected wireless LAN router.
1469-0F8