Copy Settings

 
All the settings about the copy are listed with short descriptions. Default settings are marked with a dagger ().
Asterisks (*)
Settings marked with "*1" are only available for the MF249dw / MF247dw.
Settings marked with "*2" are only available for the MF249dw.

Change Default Settings

You can change the factory default settings about copy. The selected settings are used as the default settings of the copy function. Changing Default Settings
Number of Copies
1 to 999
 
Density
-4 to 0 to +4
Auto Density
 
Original Type
Text
Text/Photo (High Speed)
Text/Photo
Photo
 
2-Sided*1
Off
1->2-Sided
2->2-Sided*2
2->1-Sided*2
Original/Finishing Type
 
Copy Ratio
Custom Ratio
100% (Direct)
400% (Max)
200%
129% STMT->LTR
78% LGL->LTR
64% LTR->STMT
50%
25% (Min)
 
N on 1
Off
2 on 1
4 on 1
ID Card Copy
Select Layout
 
Collate
Off
On
 
Sharpness
Seven Levels

Correct Density

Specify the initial copy density. You can also change the copy density temporarily. Adjusting Density
-4 to 0 to +4

Initialize Default Settings

Select this option to restore the default copy settings.
1469-091