Scanning Using an Application
 |
|
You can scan documents from applications such as image-processing or word-processing software. The scanned image is directly loaded in the application, allowing you to edit or process the image immediately. The following procedure varies depending on the application.
|
 |
|
The application must be compatible with TWAIN or WIA*. For more information, see the instruction manual for your application.
* TWAIN is a standard for connecting image input devices, such as scanners, with computers. WIA is a function that is an integrated standard in Windows.
|
1
Place the document(s). Placing Documents
The second or subsequent documents may not be scanned, or an error message may be displayed depending on the application. In such a case, place and scan one document at a time.
When <Auto Online for Remote Scan> is set to <Off>, you must tap <Scan> 
<Remote Scanner> in the <Home> screen to bring the machine online. Auto Online for Remote Scan
<Remote Scanner> in the <Home> screen to bring the machine online. Auto Online for Remote Scan2
From the application, select the start scan command.
The procedure for selecting the start scan command varies depending on the application. For more information, see the instruction manual for your application.
3
Select the scanner driver for the machine.
Select ScanGear MF or WIA.
4
Configure the scan settings as necessary.
For more information about ScanGear MF scan settings, see Configuring Scan Settings in ScanGear MF.
5
Click [Scan].
Scanning of the document starts.
When scanning is complete, the scanned image is forwarded to an application.