Viewing Network Settings
|
The IP address is not correctly configured if it is displayed as "0.0.0.0". Connecting the machine to a switching hub or bridge may result in a connection failure even when the IP address is correctly configured. This problem can be solved by setting a certain interval before the machine starts communicating. Setting a Wait Time for Connecting to a Network You can print a list of the current network settings. Output Reports |
Viewing IPv4 Settings
<Network Information> 
<IPv4> Select the setting to view 
Viewing IPv6 Settings
<Network Information> <IPv6> Select the setting to view 
Viewing the MAC Address for Wired LAN
1
Press 
.
.2
Use 
/
to select <Network Settings>, and press .
/ to select <Network Settings>, and press .If a screen for entering a PIN is displayed, enter the PIN with the numeric keys and press . Setting the System Manager PIN
. Setting the System Manager PIN3
Select <Ethernet Driver Settings>, and press .
.
Viewing the MAC Address and Information for Wireless LAN
1
Press .
.2
Use / to select <Network Settings>, and press .
/ to select <Network Settings>, and press .If a screen for entering a PIN is displayed, enter the PIN with the numeric keys and press . Setting the System Manager PIN
. Setting the System Manager PIN3
Select <Wireless LAN Settings>, and press .
.If the <Enable the wireless LAN?> message is displayed, select <Yes>, and press .
.If the <Direct Connection will be disabled. Is it OK?> message is displayed, select <Yes>, and press .
.4
Read the message that is displayed, and press .
.5
Select <Wireless LAN Information>, and press .
.6
Select the setting to view, and press .
.
Viewing WEP and WPA/WPA2-PSK information
1 | Select <Security Settings>, and press . | ||||||||
2 | Confirm and select the current security setting, and press .If the security settings are not configured, <None> is displayed. | ||||||||
3 | Select the setting to view, and press .
|
|
<Wireless LAN Status> and <Latest Error Information> can be viewed from . Press  <Network Information> <Network Connection Method> and select the setting to view. |