Copy Settings
 |
|
All the settings about the copy are listed with short descriptions. Default settings are marked with a dagger (
 ). |
 |
Asterisks (*)Settings marked with an asterisk (*) are only available for MF244dw / MF241d.
|
Change Default Settings
You can change the factory default settings about copy. The selected settings are used as the default settings of the copy function. Changing Default Settings
|
Number of Copies
1
to 999Density
-4 to 0
to +4Auto Density
Original Type
Text
Text/Photo (High Speed)
Text/Photo
Photo
2-Sided*
Off
 1->2-Sided
Original/Finishing Type
Copy Ratio
Custom Ratio
100% (1:1) 400% (Max) 200% 141% A5->A4/LTR
122% A5->B5 115% B5->A4/LTR 86% A4/LTR->B5 81% B5->A5 70% A4/LTR->A5 50% 25% (Min) N on 1
Off
2 on 1
4 on 1
ID Card Copy
Select Layout
Collate
Off
On
Sharpness
Seven Levels
|
Correct Density
Specify the initial copy density. You can also change the copy density temporarily. Adjusting Density
|
-4 to 0
to +4 |
<Copy Settings> 
<Correct Density> Adjust the density Initialize Default Settings
Select this option to restore the default copy settings.
<Copy Settings> <Initialize Default Settings> <Yes>