[Cyan]
|
-8 to +8; 0*
|
[Magenta]
|
-8 to +8; 0*
|
[Yellow]
|
-8 to +8; 0*
|
[Black]
|
-8 to +8; 0*
|
[Cyan]
|
[High]
|
-8 to +8; 0*
|
[Medium]
|
-8 to +8; 0*
|
|
[Low]
|
-8 to +8; 0*
|
|
[Magenta]
|
[High]
|
-8 to +8; 0*
|
[Medium]
|
-8 to +8; 0*
|
|
[Low]
|
-8 to +8; 0*
|
|
[Yellow]
|
[High]
|
-8 to +8; 0*
|
[Medium]
|
-8 to +8; 0*
|
|
[Low]
|
-8 to +8; 0*
|
|
[Black]
|
[High]
|
-8 to +8; 0*
|
[Medium]
|
-8 to +8; 0*
|
|
[Low]
|
-8 to +8; 0*
|
NOTE
|
Depending on the data to be printed, the Toner Save mode may not be applied even if you select [On].
If you select [On] for [Toner Save], very light or finely detailed images may not be printed clearly.
|
IMPORTANT
|
If you select [1200 dpi] for [Resolution], you cannot specify the following settings: rotate collate, different paper sizes (LTR/LGL), and double stapling on the short edge of A4 and LTR size paper.
|
NOTE
|
When printing on large scale paper, set [Resolution] to [600 dpi]. If you select [1200 dpi], there will not be enough memory necessary to process printing and printing will not be possible.
|
NOTE
|
For all selections within this setting, if the data is too large to be stored in the machine's memory, it will be recompressed at a high compression ratio.
To avoid deterioration in image quality resulting from repeated recompression, select [Display Error] for "Compressed Image Output." This allows you to cancel a job before an image with deterioration is printed out.
Depending on the image data, the image quality may not change even if the compression method is changed.
|
[Trapping]
|
[On], [Off]*
|
|
[Trapping Width]
|
[Upper]
|
0 to 3; 1* pixel
|
[Lower]
|
0 to 3; 1* pixel
|
|
[Left]
|
0 to 3; 1* pixel
|
|
[Right]
|
0 to 3; 1* pixel
|
|
[Trapping Density]
|
[Cyan]
|
0 to 100; 100* %
|
[Magenta]
|
0 to 100; 100* %
|
|
[Yellow]
|
0 to 100; 100* %
|
NOTE
|
If the density of the emphasized image is light, trapping will not be activated.
You cannot use this function in combination with 'Width Adjustment'.
|
NOTE
|
The internal restriction value cannot be changed.
This setting can only be applied to jobs in the PS mode and PDF mode.
If [Grad. Priority] is selected, characters and lines may bleed.
If [Text Priority] is selected, the color may not match.
|
NOTE
|
The Line Control mode can only be applied to jobs in the UFR II mode, PCL6 mode, PS mode, and PDF mode.
|
[Width Adjustment]
|
[On], [Off]*
|
[Horizontal]
|
[Off], [Level 1]*, [Level 2]
|
[Vertical]
|
[Off], [Level 1]*, [Level 2]
|
[Target Color]
|
[All]*, [Black Only]
|
NOTE
|
You cannot use this function in combination with 'Trapping'.
"Horizontal", "Vertical", and "Target Color" can only be selected when [On] is selected for 'Width Adjustment'.
|
IMPORTANT
|
This setting allows you to apply smoothing to graphics data and text data. Smoothing is not applied to image data.
When [Halftones] is set to [Error Diffusion], this function is disabled.
|
NOTE
|
"Apply to Graphics" and "Apply to Text" can only be selected when [Level 1] or [Level 2] is selected for Advanced Smoothing.
Settings for "Apply to Graphics" and "Apply to Text" on the touch panel display will be effective only if 'Printer Default' is set for Advanced Smoothing in the printer driver.
The results of Advanced Smoothing may differ depending on the characters and graphics patterns.
|
IMPORTANT
|
This setting does not apply to text data.
|
NOTE
|
If [Level 1] or [Level 2] is selected, and gradation is applied to halftones, graphics and images may appear grainy.
"Apply to Graphics" and "Apply to Images" are only displayed when [Level 1] or [Level 2] is selected.
|