오류 메시지 목록

User Authentication

<application name>을(를) 시작하기 전에 디바이스에 설치된 다른 어플리케이션의 작업과 관련된 다음 사항에 특히 주의해야 합니다.

AMS Printer Driver Add-in

설치

Cannot install Access Management System Add-in in this operating system.

The printer selected to install Access Management System Add-in does not exist.

Access Management System Add-in
The data of the software you want to install may have been modified.
If you continue to install, your computer may not operate properly.
Are you sure you want to continue to install?

You do not have privileges to perform installation. Log on again with Administrator privileges.

This program requires VGA or better resolution.

Cannot install Access Management System Add-in because of insufficient free disk space in drive.

Setup is not complete. If you quit now, the program will not be installed. Do you want to cancel the setup?

Installation cannot be stopped once it starts. Do you want to continue?

Not authorized to perform printer administration for '<Printer Name>'. Authorize to perform printer administration before installation.

NetSpot Job Monitor is running.
Exit the NetSpot Job Monitor, and then try to install again.

A later version of Access Management System Add-in is already installed. Use the installed later version.

Some files related to the Access Management System Add-in program are in use.
Restart your computer, and then try to install again.

The installer is currently being used.

The file path to the saved setup file is too long.
Move the files required for setup to a folder with a shorter path.

This setup does not contain the files or folders that are required to execute installation on this operating system.

Cannot correctly run this installer on this operating system.
Use an installer compatible with your operating system.

One or more printer drivers are in use. Restart your computer, and then try to install again.

Print Spooler service is stopped. Restart your computer, and then try to install again.

Cannot install this add-in because the selected drivers have already been installed with a maximum number of add-ins.

Cannot install because Access Management System Add-in of a different language is already installed.

Could not confirm the specified server record name in DNS.
Do you want to set the server as an authentication server?

This setup will search for network printers then retrieve information, such as the IP address, from the printers.
This process may take a while.
Retrieve information from the printers?

The printer IP address or host name is not entered correctly.
Installation cannot be stopped once it starts.
In addition, you must restart the computer after installation is complete.
Do you want to continue?

The printer IP address or host name retrieval was interrupted.
Only part of the IP address or host name was retrieved.

Could not create the temporary folder.

Could not copy the setup file to the temporary folder.

Could not register the setup file to the driver.

Could not change the attribute of the setup file.

Could not pause the spooler.
Installation will be canceled.

Could not restart the spooler. Restart the computer.

An error occurred when the registry was being modified or removed.

Could not get the starting path of the installer.

Could not delete the already installed Access Management System Add-in.

Cannot install because the version of Internet Explorer is old.
Install Internet Explorer 6.0 SP2 or later and try again.

Cannot update Add-ins that are installed in unsupported versions of printer drivers.
Update the printer drivers and try again.

[Record Name] is not entered correctly. Enter the [Record Name] again.

제거

The driver selected to delete Access Management System Add-in is in use.
Restart your computer and then delete Access Management System Add-in.

You do not have privileges to perform uninstallation.
Log on again with Administrator privileges.

You do not have privileges to delete one or more of the printers that use the driver '<Driver Name>'.
The deletion of Access Management System Add-in in the driver '<Driver Name>' is canceled.

You do not have privileges to delete one or more of the printers that use the driver '<Driver Name>'.
The deletion of Access Management System Add-in in the driver '<Driver Name>' is canceled.
Do you want to continue to delete Access Management System Add-in in other drivers?

Could not delete Access Management System Add-in in the driver '<Driver Name>'.
The deletion of Access Management System Add-in in the driver '<Driver Name>' is canceled.

Could not delete Access Management System Add-in in the driver '<Driver Name>'.
The deletion of Access Management System Add-in in the driver '<Driver Name>' is canceled.
Do you want to continue to delete Access Management System Add-in in other drivers?

Printing is incomplete or print jobs remain in one or more of the printers that use the driver '<Driver Name>'.
The deletion of Access Management System Add-in in the driver '<Driver Name>' is canceled.

Printing is incomplete or print jobs remain in one or more of the printers that use the driver '<Driver Name>'.
The deletion of Access Management System Add-in in the driver '<Driver Name>' is canceled.
Do you want to continue to delete Access Management System Add-in in other drivers?

Do you want to delete Access Management System Add-in in the driver '<Driver Name>'?

One or more of the printers using the driver '<Driver Name>' are shared on the network. The driver may be in use.
Are you sure you want to delete Access Management System Add-in?

NetSpot Job Monitor is running.
Exit the NetSpot Job Monitor, and then try to uninstall again.

One or more of the printers using the driver '<Driver Name>' are network printers.
Are you sure you want to delete Access Management System Add-in?

Could not delete registry.

The uninstaller is currently being used.

The file path to the saved files for uninstallation is too long.
Move the files required for uninstallation to a folder with a shorter path.

Cannot correctly run this uninstaller on this operating system.

Cannot correctly run this uninstaller on this operating system.
Use an uninstaller compatible with your operating system.

One or more files or folders required for executing uninstallation are missing.

Could not delete the file to uninstall.

Could not restart the spooler.
Restart the computer.

Could not start or pause the related service.
Restart the computer.

Could not pause the spooler.
Restart the computer.

Print Spooler service is stopped. Restart your computer, and then try to uninstall again.

Could not browse the user information.

Could not get the starting path of the uninstaller.

일반 메시지

Cannot find the file '<File Name>' in the folder '<Folder Name>'.

An error occurred in the initialization file.

An invalid parameter has been specified.

Another installation or uninstallation application is running.
Please wait a moment, and then try to start this application again.

Could not perform the process to control exclusion.

Could not get printer information.

Could not allocate the memory required.
Restart the computer and try again.

Could not access the service.
Check the Print Spooler or Canon Output Manager Service.

Could not create the result file.

AMS Printer Driver Add-in 작업

The output may differ from the specified print settings, or the print job may be canceled because the following settings are in conflict with the print restrictions.
<Control Names>

Could not obtain restriction information because the device is not responding.
Make sure that the device is turned on and try to obtain the information again later.
If the same error occurs, contact the administrator for details.

Could not obtain restriction information.

The version of this add-in does not match the obtained restriction information.

The print restrictions have been updated.
Try to print again.

Printing will be canceled because the following settings are in conflict with the print restrictions.
<Control Names>

You do not have privileges to print using this device.
Select a different printer.

Cannot set to [Store] because [Store In User Inbox] is set to [Not Available].
Printing will be canceled.

The output may differ from the specified print settings because the following settings are in conflict with the print restrictions.
<Control Names>

Cannot print with booklet settings because [Page Layout] is set to [1-2 on 1 Not Available].
Change the settings and try again.

Cannot print in poster layout because [Page Layout] is set to [1 on 1 Not Available] or [1-2 on 1 Not Available].
Change the settings and try again.

Cannot print in poster layout because [1-Sided/2-Sided Printing] is set to [2-sided Printing Only].
Change the settings and try again.

Cannot set to [Store] because [Store In User Inbox] is set to [Not Available].
Change the settings and try again.

Cannot print with booklet settings because [Page Layout] is set to [1-2 on 1 Not Available].
Printing will be canceled.

Cannot print in poster layout because [Page Layout] is set to [1 on 1 Not Available] or [1-2 on 1 Not Available].
Printing will be canceled.

Cannot print in poster layout because [1-Sided/2-Sided Printing] is set to [2-sided Printing Only].
Printing will be canceled.

Cannot create a form file or use overlay printing.
Printing will be canceled.

Cannot obtain the device IP Address or host name.
Contact the administrator for details.

Cannot obtain restriction information because network settings are incorrect.
Contact the administrator for details.

Cannot create a form file or use overlay printing.
Change the settings.

Cannot obtain restriction information because network settings are incorrect.
Contact the administrator for details.
Printing will be canceled.

Could not obtain restriction information because the device is not responding.
Printing will be canceled.
Make sure that the device is turned on and try to print again later.
If the same error occurs, contact the administrator for details.

Cannot print with perfect binding settings because [Page Layout] is set to [1 on 1 Not Available] or [1-2 on 1 Not Available].
Change the settings and try again.

Cannot print with perfect binding settings because [Page Layout] is set to [1 on 1 Not Available] or [1-2 on 1 Not Available].
Printing will be canceled.

Could not set the user information.

Could not obtain the device IP address or the host name.

Cannot set to [Hold] because [Store In User Inbox] is set to [Not Available].
Printing will be canceled.

Cannot set the output method as selected because [Store In User Inbox] is set to [Not Available].
Printing will be canceled.

Cannot set to [Hold] because [Store In User Inbox] is set to [Not Available].
Change the settings and try again.

Cannot set the output method as selected because [Store In User Inbox] is set to [Not Available].
Change the settings and try again.

The [Device IP Address/Host Name] has not been entered.
Enter the [Device IP Address/Host Name].

Could not set the user information because the network settings are incorrect.
Contact the administrator for details.

Could not set the user information because the device is not responding.
Make sure that the device is turned on and try to set the information again later.
If the same error occurs, contact the administrator for details.

Characters that cannot be used have been entered for the Domain Name [Authentication]. Check the entered characters.

Cannot use Access Management System Add-in because the version of Internet Explorer is old.
Install Internet Explorer 6.0 SP2 or later and try again.

The set user information and obtained restriction information do not match.
Set the user information again.
For Domain Authentication, enter the NetBIOS domain name in [Authentication].

The set user information and obtained restriction information do not match.
Set the user information again.

The set user information and obtained restriction information do not match.
Printing will be canceled.

The account is locked out.
Try to authenticate the account later, or contact the administrator for details.

Could not obtain restriction information because the account is locked out.
Try to obtain it later, or contact the administrator for details.

Could not obtain restriction information because the account is locked out. Printing will be canceled.
Try to print later, or contact the administrator for details.