Asterisks (*)Settings marked with "*1" cannot be imported or exported.
Settings marked with "*2" may be unavailable or vary or have different defaults depending on your country or region.
|
Set <Time Zone> before setting the current date and time. If the <Time Zone> setting is changed, the current date and time are also changed accordingly.
|
The current date and time cannot be changed for 1 hour after daylight saving time goes into effect.
|
<(UTC-12:00) International Date Line West> to <(UTC) Coordinated Universal Time> to <(UTC+14:00) Kiritimati Island>
|
UTCCoordinated Universal Time (UTC) is the primary time standard by which the world regulates clocks and time. The correct UTC time zone setting is required for Internet communications.
|
<Off>
<On>
Start: Month, Week, Day
End: Month, Week, Day
|
<YYYY MM/DD>
<MM/DD/YYYY>
<DD/MM YYYY>
|
<12 Hour (AM/PM)>
<24 Hour>
|
If a key is not pressed for a specified period of time, the screen and the settings are initialized to display the default screen (Auto Reset). Specify the interval at which the Auto Reset is performed. The Auto Reset is not performed in the following cases:
The setting menu is displayed.
The machine is processing data, such as when printing documents or sending or receiving faxes.
An error message is displayed and the Error indicator is blinking (However, Auto Reset is performed when the error does not prevent the user from continuing to use a function.)
|
<Set This Function>
<Off>
<On>
<Set Time>
1 to 2 to 9 (min.)
|
The screen displayed after the Auto Reset is performed can be selected in <Function After Auto Reset>.
|
<Default Function>
<Selected Function>
|
<Set This Function>
<Off>
<On>
<Set Time>
1 to 4 to 8 (hr.)
|
Before setting <Auto Shutdown Time> |
When the <Auto Shutdown Time> setting is enabled, the machine may automatically shut down even if you are operating the machine from the Remote UI or from the Send Function Setting Tool. A malfunction may occur, particularly if the machine shuts down while data is being imported. When you import data using the Remote UI or use the Send Function Setting Tool, set <Auto Shutdown Time> to <Off> in advance.
|
If any settings of the [Timer Settings] are changed from the Remote UI while the machine is in the sleep mode, the timer for the <Auto Shutdown Time> setting is reset to the beginning. The machine automatically shuts down after a specified period of idle time has elapsed since the timer was reset.
|
5 to 60 (min.)
|
<Set This Function>
<Off>
<On>
(0:00 to 12:59 AM/PM)
|
<Set This Function>
<Off>
<On>
(0:00 to 12:59 AM/PM)
|