<Network>
All the settings related to the network are listed with descriptions. Default settings are marked with a dagger (/b_dagger.gif)
).
).|
|
Asterisks (*)Settings marked with "*1" cannot be imported or exported.
Settings marked with "*2" may not be displayed depending on the model you are using, options, or other setting items.
|
<Select Wired/Wireless LAN>
When switching the machine from Wireless LAN to Wired LAN, you need to specify the setting. Conversely, when switching the machine from Wired LAN to Wireless LAN, you do not need to specify this setting (You can switch using the following <Wireless LAN Settings>). Selecting Wired LAN or Wireless LAN
|
<Wired LAN>
<Wireless LAN>
|
<Wireless LAN Settings>
Specify settings for connecting the machine to a wireless LAN. You can also view the current settings or specify the setting for saving power consumption.
<SSID Settings>
Select to configure a wireless connection by specifying information including an SSID or a network key by inputting manually from the operation panel.
<Select Access Point>
Wireless LAN routers that can access the machine are automatically located, so you can select from the list. You must manually enter a network key, such as a WEP key or a PSK. Setting Up Connection by Selecting a Wireless Router
<Enter Manually>
Select to configure a wireless connection by manually entering an SSID. By using this method, you can specify authentication and encryption settings in detail. Setting Up Connection by Specifying Detailed Settings
|
<Security Settings>
<None>
<WEP> <Open System>
WEP Key 1 to 4
<Shared Key>
WEP Key 1 to 4
<WPA/WPA2-PSK>
<Auto>
<AES-CCMP>
|
<WPS Push Button Mode>
Select to automatically configure a wireless connection by using the button on a WPS wireless router. Setting Up Connection Using WPS Push Button Mode
<WPS PIN Code Mode>
Select to configure a wireless connection by entering a PIN code for a WPS wireless router. Setting Up Connection Using WPS PIN Code Mode
<Power Save Mode> 
Select whether or not the machine enters Power Save Mode based on signals emitted from the wireless router.
|
<Off>
<On>
|
<Menu> /b_key_arrow_right.gif)
<Preferences> <Network> <Wireless LAN Settings> Read the displayed message <OK> <Power Save Mode> Select <Off> or <On> /b_key_home18.gif)
<Preferences> <Network> <Wireless LAN Settings> Read the displayed message <OK> <Power Save Mode> Select <Off> or <On> <Connection Information>/<Wireless LAN Information> *1
Select to view the current wireless LAN settings. Viewing Network Settings
|
<MAC Address>
<Wireless LAN Status>
<Latest Error Information> <Channel> <SSID Settings> <Security Settings> <Power Save Mode>
|
<Direct Connection Settings>
Set whether to connect directly. By enabling this function, connecting directly with the machine is possible even in an environment without an access point or wireless LAN router. Connecting Directly (Access Point Mode)
|
<Use Direct Connection>
<Off>
<On>
|
<Direct Connection Termination>/<Time Until Direct Connection Termination>
Specify the time to automatically disconnect after Direct Connection is established.
Touch panel model
|
<Automatically Terminate Session>
<Off>
<On>
<Time Until Session Terminates>
1
to 60 (min.) |
Black and white LCD model
|
0 (Do not terminate session automatically)
1 to 60 (min.)
|
Touch panel model
<Menu> <Preferences> <Network> <Direct Connection Settings> <Direct Connection Termination> Select <On> in <Automatically Terminate Session> and enter the time <Apply> <Apply>
<Preferences> <Network> <Direct Connection Settings> <Direct Connection Termination> Select <On> in <Automatically Terminate Session> and enter the time <Apply> <Apply> Black and white LCD model
<Menu> <Preferences> <Network> <Direct Connection Settings> <Time Until Direct Connection Termination> Enter the time /b_key_ok18.gif)
<Preferences> <Network> <Direct Connection Settings> <Time Until Direct Connection Termination> Enter the time <Access Point Mode Settings>
Configure the SSID/network key arbitrarily. If you want to connect multiple mobile devices to the machine at the same time, you need to configure both SSID and network key arbitrarily.
|
<Use Custom SSID>
<Off>
<On>
<SSID>
<Use Custom Network Key>
<Off>
<On>
<Network Key>
|
Touch panel model
<Menu> <Preferences> <Network> <Direct Connection Settings> <Access Point Mode Settings> Select <On> for each item and select <SSID>/<Network Key> Enter the SSID/network key <Apply> <Apply> <Apply>
<Preferences> <Network> <Direct Connection Settings> <Access Point Mode Settings> Select <On> for each item and select <SSID>/<Network Key> Enter the SSID/network key <Apply> <Apply> <Apply> Black and white LCD model
<Menu> <Preferences> <Network> <Direct Connection Settings> <Access Point Mode Settings> <Use Custom SSID>/<Use Custom Network Key> <On> Enter the SSID/network key <Apply>
<Preferences> <Network> <Direct Connection Settings> <Access Point Mode Settings> <Use Custom SSID>/<Use Custom Network Key> <On> Enter the SSID/network key <Apply> <TCP/IP Settings>
Specify settings for using the machine in a TCP/IP network, such as IP address settings.
<IPv4 Settings>/<IPv6 Settings>/<DNS Settings> (Touch panel model)
<IPv4 Settings>
Specify settings for using the machine in an IPv4 network.
<IP Address Settings>
Configure the IP address, which is used for identifying devices, such as computers and printers, on a TCP/IP network. Setting IPv4 Address
|
<Auto Acquire>
<Auto Acquire>
<Off>
<On>
<Select Protocol>
<Off>
<DHCP>
<Auto IP>
<Off>
<On>
<Manually Acquire>*2
<IP Address>: 0.0.0.0
<Subnet Mask>: 0.0.0.0 <Gateway Address>: 0.0.0.0 <Check Settings>
|
<DHCP Option Settings>
If DHCP is enabled, use these settings to select whether to use the DHCP optional functions to acquire the DNS server address or the domain name. Configuring DNS
|
<Acquire Host Name>
<Off>
<On>
<DNS Dynamic Update>
<Off>
<On>
<Acquire DNS Server Address>
<Off>
<On>
<Acquire Domain Name>
<Off>
<On>
<Acquire WINS Server Address>
<Off>
<On>
<Acquire POP Server Address>
<Off>
<On>
|
<PING Command>
Select to check that the machine is connected to a computer over a network. Testing the Network Connection
<IPv6 Settings>
Specify settings for using the machine in an IPv6 network. Setting IPv6 Addresses
|
<Use IPv6>
<Off>
<On>
|
<Check IPv6 Settings>
You can check the link-local address that is automatically acquired.
<Stateless Address Settings>
Enable or disable stateless addresses.
|
<Stateless Address Settings>
<Off>
<On>
<Check Settings>
<Stateless Address>
<Prefix Length>
|
<DHCPv6 Settings>
Enable or disable the stateful address that is acquired via DHCPv6.
|
<Use DHCPv6>
<Off>
<On>
<Check Settings>
<Stateful Address>
<Prefix Length>
|
<DHCP Option Settings>
If DHCP is enabled, use these settings to select whether to use the DHCP optional functions to acquire the DNS server address or the domain name. Configuring DNS
|
<Acquire DNS Server Address>
<Off>
<On>
<Acquire Domain Name>
<Off>
<On>
|
<DNS Settings>
Specify settings for Domain Name System (DNS), which provides a host name for IP address resolutions. Configuring DNS
<IPv4 DNS Server Address Settings>
Specify the IP address of the DNS server in the IPv4 environment.
|
<Primary DNS Server>: 0.0.0.0
<Secondary DNS Server>: 0.0.0.0 |
<DNS Host Name/Domain Name Settings>
Specify the host name of the machine to be registered in the DNS server as well as the name of the domain to which the machine belongs.
|
<IPv4>
<Host Name>
<Domain Name>
<IPv6>
<Use IPv4 Host/Domain>
<Off>
<Host Name>
<Domain Name>
<On>
|
<DNS Dynamic Update Settings>
Select whether to dynamically update the DNS records whenever the machine's IP address is changed.
|
<IPv4>
<DNS Dynamic Update>
<Off>
<On>
<DNS Dynamic Update Interval>
0 to 24
to 48 (hr.) <IPv6>
<DNS Dynamic Update>
<Off>
<On>
<Register Manual Address>
<Off>
<On>
<Register Stateful Address>
<Off>
<On>
<Register Stateless Address>
<Off>
<On>
<DNS Dynamic Update Interval>
0 to 24
to 48 (hr.) |
<mDNS Settings>
Specify settings for using DNS functions without DNS servers.
|
<IPv4>
<Use mDNS>
<Off>
<On>
<mDNS Name>
<IPv6>
<Use mDNS>
<Off>
<On>
<Use Same mDNS Name as IPv4>
<Off>
<mDNS Name>
<On>
|
<IPv4 Settings>/<IPv6 Settings> (Black and white LCD model)
<IPv4 Settings>
Specify settings for using the machine in an IPv4 network.
<IP Address Settings>
Configure the IP address, which is used for identifying devices, such as computers and printers, on a TCP/IP network. Setting IPv4 Address
|
<Auto Acquire>
<Select Protocol>
<Off>
<DHCP> <Auto IP>
<Off>
<On> <Manually Acquire>*2
<IP Address>: 0.0.0.0
<Subnet Mask>: 0.0.0.0 <Gateway Address>: 0.0.0.0 <Check Settings>
<Auto Acquire>*2
<Select Protocol>*2
<Auto IP>*2
<IP Address>
<Subnet Mask> <Gateway Address> |
<PING Command>
Select to check that the machine is connected to a computer over a network. Testing the Network Connection
<DNS Settings>
Specify settings for Domain Name System (DNS), which provides a host name for IP address resolutions. Configuring DNS
|
<DNS Server Settings>
<Primary DNS Server>: 0.0.0.0
<Secondary DNS Server>: 0.0.0.0
<DNS Host Name/Domain Name Settings>
<Host Name>
<Domain Name>
<DNS Dynamic Update Settings>
<Off>
<On>
<DNS Dyn. Updt. Intrvl.>
0 to 24
to 48 (hr.) |
<mDNS Settings>
Specify settings for using DNS functions without DNS servers. Configuring DNS
|
<Off>
<On>
<mDNS Name>
|
<DHCP Option Settings>
If DHCP is enabled, use these settings to select whether to use the DHCP optional functions to acquire the DNS server address or the domain name. Configuring DNS
|
<Acquire Host Name>
<Off>
<On>
<DNS Dynamic Update>
<Off>
<On>
<Acquire DNS Server Address>
<Off>
<On>
<Acquire Domain Name>
<Off>
<On>
<Acquire WINS Server Address>
<Off>
<On>
<Acquire POP Server Address>
<Off>
<On>
|
<IPv6 Settings>
Specify settings for using the machine in an IPv6 network.
<Use IPv6>
Enable or disable IPv6 in the machine. You can also view the current settings. Setting IPv6 Addresses
|
<Off>
<On>
<Check Settings>
<Link-Local Address>
<Prefix Length>
|
<Stateless Address Settings>
Enable or disable stateless addresses. Setting IPv6 Addresses
|
<Off>
<On>
<Check Settings>
<Stateless Address>
<Prefix Length>
|
<Use DHCPv6>
Enable or disable the stateful address that is acquired via DHCPv6. Setting IPv6 Addresses
|
<Off>
<On>
<Check Settings>
<Stateful Address>
<Prefix Length>
|
<DNS Settings>
Specify settings for Domain Name System (DNS), which provides a host name for IP address resolutions. Configuring DNS
|
<DNS Host Name/Domain Name Settings>
<Use IPv4 Host/Domain>
<Off>
<Host Name>
<Domain Name>
<On>
<DNS Dynamic Update Settings>
<Off>
<On>
<Regist. Manual Addr.>
<Off>
<On>
<Regist. Stateful Addr.>
<Off>
<On>
<Regist Stateless Addr.>
<Off>
<On>
<DNS Dynamic Update Interval>
0 to 24
to 48 (hr.) |
<mDNS Settings>
Specify settings for using DNS functions without DNS servers. Configuring DNS
|
<Off>
<On>
<Use IPv4 Name for mDNS>
<Off>
<mDNS Name>
<On>
|
<DHCP Option Settings>
If DHCP is enabled, use these settings to select whether to use the DHCP optional functions to acquire the DNS server address or the domain name. Configuring DNS
|
<Acquire DNS Server Address>
<Off>
<On>
<Acquire Domain Name>
<Off>
<On>
|
<WINS Settings>
Specify settings for Windows Internet Name Service (WINS), which provides a NetBIOS name for IP address resolutions in a mixed network environment of NetBIOS and TCP/IP. Configuring WINS
|
<WINS Resolution>
<Off>
<On>
<WINS Server Address>: 0.0.0.0
|
<LPD Settings>
Enable or disable LPD, a printing protocol that can be used on any hardware platform or operating system. You can also set the reception timeout period after which printing is canceled if print data reception is interrupted. Configuring Printing Protocols and WSD Functions
|
<Use LPD Printing>/<LPD Print Settings>
<Off>
<On>
<RX Timeout>
1 to 5
to 60 (min.) |
<RAW Settings>
Enable or disable RAW, a Windows specific printing protocol. You can also set the reception timeout period after which printing is canceled if print data reception is interrupted. Configuring Printing Protocols and WSD Functions
|
<Use RAW Printing>/<RAW Print Settings>
<Off>
<On>
<RX Timeout>
1 to 5
to 60 (min.) |
<WSD Settings>
Enable or disable automatic browsing and acquiring information for the printer by using the WSD protocol. Configuring Printing Protocols and WSD Functions
Touch panel model
|
<Use WSD Printing>
<Off>
<On>
<Use WSD Browsing>
<Off>
<On>
<Use Multicast Discovery>
<Off>
<On>
|
Black and white LCD model
|
<WSD Print Settings>
<Use WSD Print>
<Off>
<On>
<Use WSD Browsing>
<Off>
<On>
<Use Multicast Discovery>
<Off>
<On>
|
<Use HTTP>
Enable or disable HTTP, which is required for communications with a computer, such as when using the Remote UI, WSD printing, or printing with Google Cloud Print. Disabling HTTP Communication
|
<Off>
<On>
|
<Use IPSec> *1
Select whether to perform encrypted communication by establishing a virtual private network (VPN) via IPSec. Configuring IPSec Settings
|
<Off>
<On>
|
<Menu> <Preferences> <Network> <TCP/IP Settings> <Use IPSec> Select <Off> or <On> Restart the machine
<Preferences> <Network> <TCP/IP Settings> <Use IPSec> Select <Off> or <On> Restart the machine<Port Number Settings>
Change port numbers for protocols according to the network environment. Changing Port Numbers
|
<LPD>
1 to 515
to 65535<RAW>
1 to 9100
to 65535<WSD Multicast Discovery>
1 to 3702
to 65535<HTTP>
1 to 80
to 65535<Multicast Discovery>
1 to 427
to 65535<POP3>
1 to 110
to 65535<SNMP>
1 to 161
to 65535 |
<MTU Size>
Select the maximum size of packets the machine sends or receives. Changing the Maximum Transmission Unit
|
<1300>
<1400>
<1500>
|
<SNMP Settings>
Specify the settings for monitoring and controlling the machine from a computer running SNMP-compatible software. Monitoring and Controlling the Machine with SNMP
<SNMPv1 Settings>
Enable or disable SNMPv1. When enabling SNMPv1, specify a community name and access privileges to Management Information Base (MIB) objects.
|
<Off>
<On>
|
Touch panel model
<Menu> <Preferences> <Network> <SNMP Settings> Select <Off> or <On> in <SNMPv1 Settings> <Apply> Restart the machine
<Preferences> <Network> <SNMP Settings> Select <Off> or <On> in <SNMPv1 Settings> <Apply> Restart the machineBlack and white LCD model
<Menu> <Preferences> <Network> <SNMP Settings> <SNMPv1 Settings> Select <Off> or <On> Restart the machine
<Preferences> <Network> <SNMP Settings> <SNMPv1 Settings> Select <Off> or <On> Restart the machine<SNMPv3 Settings>
Enable or disable SNMPv3. Use the Remote UI to specify detailed settings that are applied when SNMPv3 is enabled.
|
<Off>
<On>
|
Touch panel model
<Menu> <Preferences> <Network> <SNMP Settings> Select <Off> or <On> in <SNMPv3 Settings> <Apply> Restart the machine
<Preferences> <Network> <SNMP Settings> Select <Off> or <On> in <SNMPv3 Settings> <Apply> Restart the machineBlack and white LCD model
<Menu> <Preferences> <Network> <SNMP Settings> <SNMPv3 Settings> Select <Off> or <On> Restart the machine
<Preferences> <Network> <SNMP Settings> <SNMPv3 Settings> Select <Off> or <On> Restart the machine<Acquire Printer Mngt. Info. from Host>
Enable or disable the monitoring of printer management information from a networked computer running SNMP-compatible software.
|
<Off>
<On>
|
Touch panel model
<Menu> <Preferences> <Network> <SNMP Settings> Select <Off> or <On> in <Acquire Printer Mngt. Info. from Host> <Apply> Restart the machine
<Preferences> <Network> <SNMP Settings> Select <Off> or <On> in <Acquire Printer Mngt. Info. from Host> <Apply> Restart the machineBlack and white LCD model
<Menu> <Preferences> <Network> <SNMP Settings> <Acquire Printer Mngt. Info. from Host> Select <Off> or <On> Restart the machine
<Preferences> <Network> <SNMP Settings> <Acquire Printer Mngt. Info. from Host> Select <Off> or <On> Restart the machine<Format Host Rsrcs. MIB to RFC2790>
Specify whether to conform to the advanced specifications (RFC2790) of the protocol when monitoring the machine status from the SNMP-compatible software.
|
<Off>
<On>
|
Touch panel model
<Menu> <Preferences> <Network> <SNMP Settings> Select <Off> or <On> in <Format Host Rsrcs. MIB to RFC2790> <Apply> Restart the machine
<Preferences> <Network> <SNMP Settings> Select <Off> or <On> in <Format Host Rsrcs. MIB to RFC2790> <Apply> Restart the machineBlack and white LCD model
<Menu> <Preferences> <Network> <SNMP Settings> <Format Host Resources MIB to RFC2790> Select <Off> or <On> Restart the machine
<Preferences> <Network> <SNMP Settings> <Format Host Resources MIB to RFC2790> Select <Off> or <On> Restart the machine<Use Dedicated Port>/<Dedicated Port Settings>
Enable or disable the dedicated port. The dedicated port is used when printing from the computer and when browsing or specifying the machine settings over the network.
|
<Off>
<On>
|
<Menu> <Preferences> <Network> <Use Dedicated Port>/<Dedicated Port Settings> Select <Off> or <On> Restart the machine
<Preferences> <Network> <Use Dedicated Port>/<Dedicated Port Settings> Select <Off> or <On> Restart the machine<Dedicated Port Auth. Method>/<Dedicated Port Authentication Method>
Specify whether to limit the authentication method specifically to the secure one when using the dedicated port. If <Mode 2> is selected, the authentication method is limited specifically to the secure one.
|
<Mode 1>
<Mode 2>
|
<Menu> <Preferences> <Network> <Dedicated Port Auth. Method>/<Dedicated Port Authentication Method> Select <Mode 1> or <Mode 2> Restart the machine
<Preferences> <Network> <Dedicated Port Auth. Method>/<Dedicated Port Authentication Method> Select <Mode 1> or <Mode 2> Restart the machine
 |
|
If <Mode 2> is selected, you cannot establish a connection from the device management software or driver in some cases.
|
<Wait Time for Conn. at Startup>/<Waiting Time for Connection at Startup>
Specify a wait time for connecting to a network. Select the setting depending on the network environment. Setting a Wait Time for Connecting to a Network
|
0
to 300 (sec.) |
<Ethernet Driver Settings>
Select the Ethernet type (10BASE-T/100BASE-TX/1000BASE-T) and the communication mode of Ethernet (half-duplex/full-duplex). You can also view the MAC address for wired LAN.
<Auto Detect>
Select whether to automatically detect or manually select the communication mode and the Ethernet type. Configuring Ethernet Settings
|
<Off>
<Communication Mode>
<Half Duplex>
<Full Duplex>
<Ethernet Type>
<10BASE-T>
<100BASE-TX>
<1000BASE-T>
<On>
|
|
|
|
When <Communication Mode> is set to <Half Duplex>, you cannot select <1000BASE-T>.
|
<MAC Address>
Check the MAC address of the machine, which is a number unique to each communication device. Viewing the MAC Address for Wired LAN
<Use IEEE 802.1X>/<IEEE 802.1X Settings> *1*2
Enable or disable IEEE 802.1X authentication. Configuring IEEE 802.1X Authentication Settings
|
<Off>
<On>
|
<Menu> <Preferences> <Network> <Use IEEE 802.1X>/<IEEE 802.1X Settings> Select <Off> or <On> Restart the machine
<Preferences> <Network> <Use IEEE 802.1X>/<IEEE 802.1X Settings> Select <Off> or <On> Restart the machine<Firewall Settings>
Without proper security, unauthorized third parties can access computers and other communication devices that are connected to a network. To prevent this unauthorized access, specify the settings for packet filter, a feature that restricts communication to devices with specified IP addresses or MAC addresses.
<IPv4 Address Filter>
Enable or disable settings for filtering packets sent to or received from devices with specified IPv4 addresses. Specifying IP Addresses for Firewall Settings
|
<Outbound Filter>
<Off>
<On>
<Inbound Filter>
<Off>
<On>
|
Touch panel model
<Menu> <Preferences> <Network> <Firewall Settings> <IPv4 Address Filter> Select <Off> or <On> in <Outbound Filter> or <Inbound Filter> <Apply> Restart the machine
<Preferences> <Network> <Firewall Settings> <IPv4 Address Filter> Select <Off> or <On> in <Outbound Filter> or <Inbound Filter> <Apply> Restart the machineBlack and white LCD model
<Menu> <Preferences> <Network> <Firewall Settings> <IPv4 Address Filter> Select <Outbound Filter> or <Inbound Filter> Select <Off> or <On> Restart the machine
<Preferences> <Network> <Firewall Settings> <IPv4 Address Filter> Select <Outbound Filter> or <Inbound Filter> Select <Off> or <On> Restart the machine<IPv6 Address Filter>
Enable or disable settings for filtering packets sent to or received from devices with specified IPv6 addresses. Specifying IP Addresses for Firewall Settings
|
<Outbound Filter>
<Off>
<On>
<Inbound Filter>
<Off>
<On>
|
Touch panel model
<Menu> <Preferences> <Network> <Firewall Settings> <IPv6 Address Filter> Select <Off> or <On> in <Outbound Filter> or <Inbound Filter> <Apply> Restart the machine
<Preferences> <Network> <Firewall Settings> <IPv6 Address Filter> Select <Off> or <On> in <Outbound Filter> or <Inbound Filter> <Apply> Restart the machineBlack and white LCD model
<Menu> <Preferences> <Network> <Firewall Settings> <IPv6 Address Filter> Select <Outbound Filter> or <Inbound Filter> Select <Off> or <On> Restart the machine
<Preferences> <Network> <Firewall Settings> <IPv6 Address Filter> Select <Outbound Filter> or <Inbound Filter> Select <Off> or <On> Restart the machine<MAC Address Filter>
Enable or disable settings for filtering packets sent to or received from devices with specified MAC addresses. Specifying MAC Addresses for Firewall Settings
|
<Outbound Filter>
<Off>
<On>
<Inbound Filter>
<Off>
<On>
|
Touch panel model
<Menu> <Preferences> <Network> <Firewall Settings> <MAC Address Filter> Select <Off> or <On> in <Outbound Filter> or <Inbound Filter> <Apply> Restart the machine
<Preferences> <Network> <Firewall Settings> <MAC Address Filter> Select <Off> or <On> in <Outbound Filter> or <Inbound Filter> <Apply> Restart the machineBlack and white LCD model
<Menu> <Preferences> <Network> <Firewall Settings> <MAC Address Filter> Select <Outbound Filter> or <Inbound Filter> Select <Off> or <On> Restart the machine
<Preferences> <Network> <Firewall Settings> <MAC Address Filter> Select <Outbound Filter> or <Inbound Filter> Select <Off> or <On> Restart the machine<Google Cloud Print Settings>
Enable or disable Google Cloud Print. Registering the Machine with Google Cloud Print
|
<Use Google Cloud Print>/<Enable Google Cloud Print>
<Off>
<On>
<Google Cloud Print Regist. Status>/<Google Cloud Print Registration Status>*1
|
<Device Settings Management>/<Device Settings Management On/Off>
Specify whether to use imageWARE Enterprise Management Console plug-ins to manage machine data such as settings. For detailed information on imageWARE Enterprise Management Console, contact your nearest Canon dealer. Configuring Settings for Communication between the Machine and Plug-ins
|
<Off>
<On>
|
<Monitoring Service> *1*2
Enable communication with a remote monitoring server. Execution of this item enables information about the machine to be periodically sent to the remote monitoring server connected to the machine.
<Menu> <Preferences> <Network> <Monitoring Service> <Yes>
<Preferences> <Network> <Monitoring Service> <Yes> <RMT-SW>
Leave this switch set to <Off>. When the service representative remotely performs device maintenance, you may be asked to set the switch to <On>.
|
<Off>
<On>
|
<Menu> <Preferences> <Network> <RMT-SW> Select <Off> or <On> Restart the machine
<Preferences> <Network> <RMT-SW> Select <Off> or <On> Restart the machine<Initialize Network Settings>
Select to return the Network Settings to the factory defaults. <Initialize Menu>