Cause 1
|
The machine and cable are not properly connected.
|
Remedy
|
Confirm that the machine is connected to the network using the correct cable, and then restart the machine. (See "Connecting the Machine to a Computer or Network.")
|
Cause 2
|
[Confirm Network Connection Set. Changes] is set to 'On', although the machine is not connected to a network.
|
Remedy
|
Set [Confirm Network Connection Set. Changes] to 'Off'.
|
Cause 1
|
Because the IP address cannot be obtained automatically via DHCP, RARP, or BOOTP, [IP Address] in <IP Address Settings> (in the IPv4 Settings) is set to '0.0.0.0'.
|
||
Remedy
|
See "TCP/IPv4 Settings" to specify the correct IPv4 address.
|
||
Cause 2
|
'0.0.0.0' is set as a static IPv4 address in [IP Address] of <IP Address Settings> (in the IPv4 Settings).
|
||
Remedy
|
See "TCP/IPv4 Settings" to specify the correct IPv4 address.
|
||
Cause 3
|
The IPv6 addresses are not properly set up.
|
||
Remedy
|
Check the following:
Confirm that the settings for the addresses (<Use Stateless Address>, <Use Manual Address>, or <Use DHCPv6>) are set to 'On'.
If you are using a stateless address or DHCPv6, confirm that addresses can be obtained.
If addresses cannot be obtained, check the settings of the router or DHCPv6 server.
|
||
Cause 4
|
The IP address of the DNS server is not correct.
|
||
Remedy
|
See "TCP/IPv4 Settings" or "TCP/IPv6 Settings" to check the IP address of the DNS server.
|
||
Cause 5
|
Sending could not be performed due to a lack of resources in the TCP/IP protocol stack.
|
||
Remedy
|
See "TCP/IPv4 Settings" or "TCP/IPv6 Settings" to specify the correct IPv4/IPv6 address.
|
Cause 1
|
The WebDAV server does not support TLS encrypted communication.
|
Remedy
|
Specify the TLS settings required for your environment on the WebDAV server.
|
Cause 2
|
The proxy server does not support TLS encrypted communication.
|
Remedy
|
If the WebDAV client is connected to the Internet via a proxy server, set the proxy server to use TLS.
|
Cause 1
|
An error occurred in the WebDAV server or proxy server.
|
Remedy
|
Check the following:
Check the settings for the WebDAV server.
Check the settings of the proxy server.
|
Cause 2
|
External access to the target files or directories was denied.
|
Remedy
|
Check the following:
Check the settings for the WebDAV server.
See "Vastaanottajien määrittäminen" to confirm the settings for a recipient address.
|
Cause 3
|
The WebDAV server is busy because of heavy access.
|
Remedy
|
Try sending again later.
|
Cause 4
|
Sending files in chunks is not allowed.
|
Remedy
|
Press [Off] for [Use Divided Chunk Send for WebDAV TX] in [Send] in [Function Settings] (Settings/Registration). (See "Datan jakaminen osiin lähetettäessä WebDAVilla.")
|
Cause 5
|
The size of the sent data is too large.
|
Remedy
|
Confirm the size of the sent data.
|
Cause 6
|
The specified URI (host name and folder path specified as the recipient address) is too long.
|
Remedy
|
See "Vastaanottajien määrittäminen" to confirm the full path for the HTTP server entered in [Host Name] and the WebDAV folder path entered in [Folder Path] as the recipient address.
|
Cause 1
|
The machine tried to access the destination without using a proxy server, but it was necessary to access via a proxy server.
|
Remedy
|
Check the following:
Check the settings for the WebDAV server.
Confirm the proxy server settings. (See step 12 in "Settings Common to TCP/IPv4 and TCP/IPv6.")
|
Cause 2
|
Access to the destination was denied.
|
Remedy
|
Check the settings for the WebDAV server.
|
Cause 3
|
The machine tried to access the destination via a proxy server without using TLS encrypted communication.
|
Remedy
|
Press [Off] for [Use Divided Chunk Send for WebDAV TX] in [Send] in [Function Settings] (Settings/Registration). (See "Datan jakaminen osiin lähetettäessä WebDAVilla.")
|
Cause 4
|
The proxy server failed to communicate with the upstream server.
|
Remedy
|
Check the following:
Check the settings for the WebDAV server.
Check the settings of the proxy server.
|
Cause 5
|
According to the request from the WebDAV client, the HTTP protocol version which is not supported by the WebDAV server is used.
|
Remedy
|
Check the settings for the WebDAV server.
|
Cause 6
|
The disk space on the WebDAV server was insufficient to process the request from the WebDAV client.
|
Remedy
|
Free up sufficient disk space on the WebDAV server.
|
Cause
|
Proxy server authentication failed.
|
Remedy
|
See step 12 in "Settings Common to TCP/IPv4 and TCP/IPv6" to confirm the settings of the proxy server.
|
Cause 1
|
The name specified for the SMB server is identical to the name of a computer or printer registered in the WINS database, when <WINS Resolution> for [WINS Settings] is set to 'On'.
|
Remedy
|
Check whether the name specified in [Server Name] for [SMB Server Settings] is identical to the name of a computer or printer registered in the WINS database. For information on SMB server and WINS resolution settings, see "SMB and WINS Settings."
|
Cause 2
|
The name specified for the SMB server is identical to the name of a computer or printer that belongs to the same workgroup as this machine.
|
Remedy
|
Check whether the name specified in [Server Name] for [SMB Server Settings] is identical to the name of a computer or printer in the workgroup specified in [Workgroup Name]. For information on SMB server and workgroup settings, see "SMB and WINS Settings."
|
Cause
|
The same IPv4 address that is set to this machine already exists on the same network.
|
Remedy
|
See "TCP/IPv4 Settings" to change the IP address of this machine not to be duplicated with the IP addresses which are set to the other devices.
|
Cause
|
The key pair or server certificate to use has not been registered.
|
Remedy
|
It is necessary to register a key pair and server certificate in order to perform encrypted TLS communication. See "Avainparin ja palvelinvarmenteen luominen" or "Tietokoneesta asennetun avainparitiedoston ja palvelinvarmennetiedoston tallentaminen" to register a key pair.
|
Cause
|
The key you are trying to erase is currently being used for encrypted TLS communication or used for the Restrict Receiving for Each Function mode in the device information delivery.
|
Remedy
|
Cancel all TLS settings and encrypted TLS communication. Set all settings for [Restrict Receiving for Each Function] in Device Information Delivery Settings to 'On.' For details, see "Laitetietojen toimitusasetusten määrittäminen."
|
Cause
|
The key you are trying to erase is currently being used for encrypted TLS communication or used for the Restrict Receiving for Each Function mode in the device information delivery.
|
Remedy
|
Cancel all TLS settings and encrypted TLS communication. Set all settings for [Restrict Receiving for Each Function] in Device Information Delivery Settings to 'On.' For details, see "Laitetietojen toimitusasetusten määrittäminen."
|
Cause
|
You are trying to register a key pair file which uses an unsupported encryption algorithm.
|
Remedy
|
Register key pair file which uses a supported encryption algorithm. (See "Tietokoneesta asennetun avainparitiedoston ja palvelinvarmennetiedoston tallentaminen.")
|
Cause
|
The certificate is invalid.
|
Remedy
|
Reinstall the valid certificate.
|
Cause
|
The certificate is invalid.
|
Remedy
|
Reinstall the valid certificate.
|
Cause 1
|
The certificate has expired.
|
Remedy
|
Confirm the expiration date for the certificate. If it has expired, register a certificate which has not expired.
|
Cause 2
|
The date and time of the machine is not set correctly. (It is set to a future date and time.)
|
Remedy
|
Confirm that the date and time of the machine is set correctly.
|
Cause
|
The CA certificate which has issued the certificate could not be found.
|
Remedy
|
If you want to verify the certificate, register the CA certificate which issued it.
|
Cause
|
The certificate is listed on the CRL (Certificate Revocation Lists).
|
Remedy
|
Install a new certificate.
|
Cause
|
The CRL (Certificate Revocation List) is corrupt, or uses an unsupported signature algorithm.
|
Remedy
|
Register a valid CRL.
|
Cause 1
|
The start date of validity for the CRL (Certificate Revocation List) is set to a future date.
|
Remedy
|
Confirm the start date of validity for the CRL. If it is set to a future date, use the CRL after it becomes valid.
|
Cause 2
|
The date and time of this machine is not set correctly. (It is set to a future date and time.)
|
Remedy
|
Confirm that the date and time of the machine is set correctly.
|
Cause
|
The CRL (Certificate Revocation List) could not be verified on the machine.
|
Remedy
|
Register the CRL.
|
Cause
|
The certificate has expired.
|
Remedy
|
Confirm the expiration date for the certificate.
|
Cause 1
|
Access to the user certificate was denied when sending a PDF or XPS file with a user signature.
|
Remedy
|
See "Avainparin ja käyttäjävarmenteen vahvistaminen" to confirm the user certificate settings.
|
Cause 2
|
Access to the device certificate was denied when sending a PDF or XPS file with a device signature.
|
Remedy
|
See "Avainparin ja laitevarmenteen asettaminen/vahvistaminen" to confirm the device certificate settings.
|
Cause
|
The correct client authentication information (the key pair and certificate, user name and password, and the CA certificate) is not set.
|
Remedy
|
Confirm the set authentication method and authentication information (the key pair and certificate, user name and password, and CA certificate).
|
Cause
|
The password has expired.
|
Remedy
|
Set a new password.
|
Cause
|
The specified authentication method of the machine does not match the authentication method of the RADIUS server.
|
Remedy
|
Confirm whether the authentication method specified for the machine and the authentication method specified for the RADIUS server match, and specify the correct authentication method if necessary.
|
Cause
|
The server certificate sent from the RADIUS server has expired.
|
Remedy
|
Confirm the expiration date for the server certificate of the RADIUS server.
|
Cause
|
An error occurred when verifying the server certificate sent from the RADIUS server using the CA certificate.
|
Remedy
|
Confirm the contents of the server certificate of the RADIUS server, as well as the CA certification registered on the machine.
|
Cause
|
The machine failed to analyze the server certificate sent from the RADIUS server.
|
Remedy
|
Confirm the server certificate contents of the RADIUS server.
|
Cause
|
An error occurred when communicating with the authenticator.
|
Remedy
|
Confirm the authenticator (LAN switch) settings, as well as the RADIUS server settings.
|