Canceling Stapling Set for the Entire Document on a Chapter Basis

The staple settings to bind each chapter (that are set for the entire document) can be canceled on a chapter basis.
NOTE
If [Staple Each Chapter] is selected for the staple settings, staple settings can be canceled on a chapter basis.
For information on how to add staple settings to the entire document, see the following.
1.
Select (Chapter) for the chapter to cancel staple settings for on the [Page Tree] tab of the Navigation Window.
NOTE
If the [Page Tree] tab on the Navigation Window is not displayed, see the following.
2.
Click  for  (Chapter Settings) on the ribbon.
Or, follow one of the steps described below.
Click for (Chapter Settings) on the ribbon, and select [Chapter Settings]
Click  (Chapter Settings) on the ribbon
Right-click and select [Chapter Settings]
The [Chapter Settings] dialog box is displayed.
NOTE
If commands are not displayed on the ribbon of Desktop Editor, see the following to display them.
This operation can also be performed with the tool buttons on the toolbar. If tool buttons are not displayed on the toolbar of Desktop Editor, see the following to display them.
3.
Select the [Specify staple settings for selected chapter] check box on the [Print Settings] tab.
4.
Select the [Do not staple] check box.
5.
Click [OK].
The chapter icon displayed on the [Page Tree] tab on the Navigation Window changes to and the chapter name changes to blue.
NOTE
If [Auto (Size)] is selected as the output size, the staple settings are canceled.
If you set stapling, only [Z-fold] can be set in the fold settings.
19HW-0FC