Adding a New Image Stamp

You can add new image stamps to Desktop Editor.

Click

for

(Stamp) on the ribbon, and select [Manage Stamps].

Or, follow one of the steps described below.

Click

(Manage Stamps) on the ribbon

Click the

(Manage Stamps) on the ribbon

Select the [File] menu > [Settings/Management] > [Manage Stamps]

The [Manage Stamps] dialog box is displayed.

NOTE
If commands are not displayed on the ribbon of Desktop Editor, see the following to display them. Adding Commands to Ribbons This operation can also be performed with the tool buttons on the toolbar. If tool buttons are not displayed in the toolbar of Desktop Editor, see the following to display them. Setting Buttons on Toolbars Lists of Ribbon Commands/Toolbars

Click [Add].

The [Add New Stamp] dialog box is displayed.

Select [Image] in [Stamp Type].

Select the image to use for the image stamp and set the transparency.

[File Name]	Click [Browse] and specify the image file to use in the image stamp. Or, specify the path of the image file to use in the image stamp using up to 259 characters (total number of 2-byte and 1-byte characters).
[Transparency]	The slider position and the numeric value indicate the degree of transparency of the stamp. To change the degree of transparency, move the slider to the left or right, or enter a numeric value. You can also use to change the degree of transparency.

NOTE
The following image file formats can be used for image stamps. BMP TIFF (For a multi-page TIFF image, the first page is used. TIFF images including transparent parts also can be used.) JPEG PNG GIF The types of image files that can be inserted may increase, depending on the codecs installed in your computer.

Enter a name in [Stamp Name].

NOTE
Enter the stamp name using 31 characters or less. You cannot set the same name as an existing stamp.

Confirm the preview display and click [OK].

The [Manage Stamps] dialog box is displayed again.

The stamp added in [Stamp List] is displayed.

Click [Close].