Viewing Network Settings
|
NOTE
|
|
The IP address is not correctly configured if it is displayed as "0.0.0.0".
Connecting the machine to a switching hub or bridge may result in a connection failure even when the IP address is correctly configured. This problem can be solved by setting a certain interval before the machine starts communicating. Setting a Wait Time for Connecting to a Network
You can print a list of the current network settings. System Manager Data List
|
Viewing IPv4 Settings
(Status Monitor) 
<Network Information> 
<IPv4> Select the setting to view 
Viewing IPv6 Settings
(Status Monitor) <Network Information> <IPv6> Select the setting to view 
Viewing the MAC Address
1
Press 
.
.2
Use 
/
to select <Network Settings>, and press .
/ to select <Network Settings>, and press .If the logon screen appears, enter the correct ID and PIN using the numeric keys, and then press 
. Logging on to the Machine
. Logging on to the Machine3
Select <Ethernet Driver Settings>, and press .
.