Setting the Function Version
You can set the function version of the printer. Which functions are available is dependent on the function version.
1.
Display the [Device Settings] tab.
Click [
] (Start) → [Devices and Printers].
] (Start) → [Devices and Printers].The above is for Windows 7 and Server 2008 R2.
For Windows 10: Click [Settings] → [Devices] → [Printers & scanners] → [Related settings] → [Devices and printers].
For Windows 8, 8.1, Server 2012 and Server 2012 R2: From the desktop, display the charm bar to the right of the screen, and click or tap [
Settings] → [Control Panel] → [Devices and Printers].
Settings] → [Control Panel] → [Devices and Printers].For Windows Vista and Server 2008: Click [] (Start) → [Control Panel] → [Printers].
] (Start) → [Control Panel] → [Printers].For Windows Server 2003/Server 2003 R2: Click [Start] → [Printers and Faxes] (or [Start] → [Control Panel] → [Printers and Other Hardware] → [Printers and Faxes]).
Right-click the icon of the printer you are using → click [Printer properties] (or [Properties]).
Click the [Device Settings] tab.
2.
Click [Get Device Status].
Printer information is obtained and the function version is automatically set.
If the information cannot be obtained, configure the settings in step 3.
3.
Click [Function] → confirm and/or set [Function Version] → click [OK].
Select the function version that is contained in the configuration page that you can print from the control panel of the printer.
4.
Click [Apply] in the [Device Settings] tab.
About this Function
Required Conditions
When acquiring printer information with a client computer in a shared printer environment: Installation of Canon Driver Information Assist Service (installable from the printer driver installer) in the server.
References
For details on how to print the printer configuration page, refer to the manual supplied with the printer.