Using the App to Copy from a Device

You can operate this app to copy originals placed in the device.
Buttons for performing one-sided copying and two-sided copying are registered by default, but you can also register customized settings.
By registering frequently used settings in buttons, you can execute the registered operations simply by tapping a button. The registered buttons can be used on all multi-function devices that support this function.

Prerequisites

The device to use allows jobs to be performed from mobile terminals
Follow the procedure below to enable the setting from the control panel of the device.
Display [Management Settings] > [License/Other] from (Settings/Registration) → set [Allow Jobs to Be Performed from Mobile Device] to [On].
[Log in as Guest user] is disabled in [App Settings] > [User Information]
NOTE
If the user authentication of the device is enabled and [Display When Function Is Selected] is set in [Login Screen Display Settings], display either of the following screens before performing the operation.
Main Menu/Home
Mobile Portal
If the software keyboard is displayed on the keyboard authentication screen, close the software keyboard before performing the operation.

Procedures

1.Tap [] on the top left corner of the Canon PRINT Business home screen.
[Select Printer] screen is displayed.
2.Select the device you are using.
3.Tap [Other Functions] in the home screen of Canon PRINT Business.
4.Tap [Copy].
When copying with the default settings
5.On the [Copy] screen, tap [Copy] (for one-sided copying) or [2-Sided Copy] (for two-sided copying).
6.Enter the number of copies in [Copies].
The default copy settings are specified, but you can tap a setting to change it.
7.Place the originals on the device, and tap [Start].
The job may be canceled if you place the originals after tapping [Start].
If the message [The job will be performed. Is this OK?] is displayed, confirm that the originals are placed correctly, and tap [OK].
If the [Enter PIN Code] screen is displayed, enter the four digit PIN code displayed on the device screen.
When registering a new button
5.On the [Copy] screen, tap [Add Button].
6.Specify the settings to register to the button and button name, and tap [Store].
NOTE
The settings of the device are used for any settings not configured in the app.
To select the paper to copy on, select the paper source in [Select Paper].
In the following cases, copying cannot be performed. To perform copying, change the paper source in [Select Paper] to an available paper source.
When a device with a maximum paper width of A4/Letter is selected and [Auto] is selected in [Select Paper]
When a paper drawer not attached to the device is selected in [Select Paper]

Result

Copying starts.
If you registered a new button, it is added to the [Copy] screen.
NOTE
To change the settings of a registered button, tap the [] on the right of the button.
To sort the buttons or delete a button, tap the Edit icon on the top right of the screen.
If the message "The job has been canceled because the printer was being used, or a timeout occurred." is displayed, log in to the device before performing the operation or change the visual message settings of the device.
If the message "Could not perform the job because the job settings on the printer are incorrect, or another operation was being processed." is displayed, check the [Copy] settings of the device, and change any settings that conflict with the settings specified in the app.

Related Topics

Setting User Information
Risks of Communication Using a Self-signed Certificate

Find manuals for other products
iOS Canon PRINT Business
User's Guide (Product Manual)
USRMA-2595-132025-02Copyright CANON INC. 2025