Scanning (imageRUNNER ADVANCE Series)

You can receive data scanned in the multi-function device on your mobile terminal.
With the imageRUNNER ADVANCE series, you can configure scan settings and execute scanning from a mobile terminal using the [Scan for Mobile] function of the multi-function device.
If you cannot use the [Scan for Mobile] function, you configure scan settings and execute scanning by installing the free Canon Mobile Scanning MEAP Application in the imageRUNNER ADVANCE.
Start Scan for Mobile or the Canon Mobile Scanning MEAP Application from the touch panel display of the multi-function device, then perform the operation with the mobile terminal.

Prerequisites

When using the [Scan for Mobile] function

The [Scan for Mobile] function is activated.
If the ACCESS MANAGEMENT SYSTEM is activated, user privileges for the [Scan for Mobile] function are applied for the logged-in user.
NOTE
If you cannot use Scan for Mobile or the Canon Mobile Scanning MEAP Application, configure the scan settings using the [Scan and Send] function of the multi-function device.

Procedures

Preparing the Multi-function Device

1.Set the original on the platen glass or feeder of the multi-function device.
2.Press [Scan for Mobile] or [Canon Mobile Scanning] on the touch panel display.
If the icon above is not displayed, press [Show All] in the Main Menu to change the display.
3.If you are required to log in to the device, enter the user name and password and log in.
4.In the [Scan for Mobile]/[Canon Mobile Scanning MEAP Application] screen, confirm [Device Name] and [IP Address].

Performing Operations with the Mobile Terminal

1.Tap [] in the upper left corner of the Canon PRINT Business home screen and register/select the device to use.
Refer to the device name/IP address displayed in the [Scan for Mobile]/[Canon Mobile Scanning MEAP Application] screen of the multi-function device.
2.In the home screen, tap [Scan].
3.In the [Scan] screen, configure the scan settings.
4.Tap [Scan].
When scanning from the platen glass
The confirmation screen is displayed at the control panel of the multi-function device.
When you want to continue scanning:
Set the original → press [] (Start).
When you want to finish scanning:
Press [Start Sending].
NOTE
When scanning both sides of an original using a feeder, to align the orientation of even pages and odd pages, set [2-Sided Original] to match the binding direction of the original.
However, for devices that have [] displayed in the [Select Printer] screen, set [2-Sided Original] as follows when scanning landscape originals.
For book type double-sided originals with binding on the short edge: [Calendar Type]
For calendar type double-sided originals with binding on the long edge: [Book Type]

Result

The scanned data is saved and the document preview screen is displayed.

JPEG/PDF

A preview is displayed in the document preview screen.

TIFF/OOXML

A file icon is displayed in the document preview screen.

Related Topics