Scanning (imageCLASS/i-SENSYS Series, etc.)
You can operate the multi-function device from the mobile terminal and capture the scanned data.
Scan using the following methods for a series that does not have [Scan for Mobile] or [Canon Mobile Scanning] in the main menu of the device.
Procedures
Preparing the Multi-function Device
1.Set the original on the platen glass or feeder.
2.Press [Scan].
3.Press [
] or [
] to select [Remote Scanner] → press [OK].
] or [] to select [Remote Scanner] → press [OK].A remote scanner waiting (online) screen is displayed.
NOTE |
Some device models enable you to set the scanner to go online automatically. However, depending on the device settings, automatic online may not be enabled. For details, refer to the manuals provided with the device. |
Performing Operations with the Mobile Terminal
1.Tap [
] in the upper left corner of the Canon PRINT Business home screen and register/select the device to use.
] in the upper left corner of the Canon PRINT Business home screen and register/select the device to use.2.In the home screen, tap [Scan].
3.In the [Scan] screen, configure the scan settings.
4.Tap [Scan].
When scanning from the platen glass
When scanning of the original is finished, a continue scanning confirmation screen is displayed on the mobile terminal.
When you want to continue scanning:
Set the original → Tap [Scan].
When you want to finish scanning:
Tap [Done].
NOTE |
When scanning both sides of an original using a feeder, to align the orientation of even pages and odd pages, set [2-Sided Original] to match the binding direction of the original. However, set [2-Sided Original] as follows when scanning landscape originals. For book type double-sided originals with binding on the short edge: [Calendar Type] For calendar type double-sided originals with binding on the long edge: [Book Type] |
Result
The scanned data is saved and a preview is displayed.