NOTE
|
It is convenient if you register frequently inserted images as image stamps. For information on registering new image stamps, see the following.
|
NOTE
|
If the Details Window is not displayed, see the following.
This operation can also be performed with the tool buttons. If tool buttons are not displayed on the toolbar of Desktop Editor, see the following to display them.
|
[Transparency]
|
The slider position and the numeric value indicate the degree of transparency of the image. To change the degree of transparency, move the slider to the left or right, or enter a numeric value. You can also use
![]() |
NOTE
|
Properties can also be set from ribbon commands or tool buttons. For information on the commands and tool buttons that can set properties, see the following.
|
NOTE
|
To cancel the insertion process, do one of the following.
Click
![]() Click
![]() Click
![]() Click the command selected on the ribbon again
Click
![]() Click
![]() Click
![]() Click the selected button on the Details Window again
Press the [Esc] key on the keyboard
|
NOTE
|
Image documents in the following image file formats can be inserted.
BMP
TIFF (For a multi-page TIFF image, the first page is used. TIFF images including transparent parts also can be used.)
JPEG
PNG
GIF
The types of image documents that can be inserted may increase, depending on the codecs installed in your computer.
When the edge of the inserted image exceeds the edge of the page, the size of the image is automatically reduced to fit the page while the aspect ratio of the image is maintained.
|
NOTE
|
When you want to change the inserted image, delete it first and then insert another image again.
|