Inserting Strikethroughs in Document Text

With Desktop Editor, you can insert a strikethrough into a document as an annotation.
1.
Click (Select Text) on the ribbon.
Or, follow one of the steps described below.
Click (Strikethrough) on the ribbon.
Click (Select Text) on the Details Window
Click (Strikethrough) on the Details Window
NOTE
If the Details Window is not displayed, see the following.
Displaying/Hiding the Details Window
This operation can also be performed with the tool buttons. If tool buttons are not displayed on the toolbar of Desktop Editor, see the following to display them.
Setting Tool Buttons on the Toolbar
Lists of Ribbon Commands/Tool Buttons
You can also insert strikethroughs multiple times. For more information, see the following.
Inserting Multiple Annotations
2.
Drag the mouse pointer on the Work Window to select the string to insert the strikethrough in.
When the cursor passes over a selectable text string, the shape of the mouse pointer changes to .
If you clicked (Select Text) in step 1, proceed to step 3.
If you clicked (Strikethrough) in step 1, a strikethrough is inserted in the text string, and strikethrough properties are displayed on the Details Window. In this case, proceed to step 4.
NOTE
To cancel the insertion process, do one of the following.
Click (Select Object) on the ribbon
Click  (Select Text) on the ribbon
Click  (Grab Mode) on the ribbon
Click the command selected on the ribbon again
Click (Select Object) on the Details Window
Click  (Select Text) on the Details Window
Click  (Grab Mode) on the Details Window
Click the selected button on the Details Window again
3.
Click (Strikethrough) on the ribbon.
Or, follow one of the steps described below.
Click (Strikethrough) on the Details Window
Right-click and select [Strikethrough].
A strikethrough is inserted into the text, and the strikethrough properties are displayed on the Details Window.
NOTE
If the Details Window is not displayed, see the following.
Displaying/Hiding the Details Window
This operation can also be performed with the tool buttons. If tool buttons are not displayed on the toolbar of Desktop Editor, see the following to display them.
Setting Tool Buttons on the Toolbar
Lists of Ribbon Commands/Tool Buttons
4.
Configure the properties of the strikethrough.
[Line Color]
Select the line color you want to use from the list displayed when you click . When you want to use a color that is not available in the list, select [More Colors].
[Transparency]
The slider position and the numeric value indicate the degree of transparency of the strikethrough. To change the degree of transparency, move the slider to the left or right, or enter a numeric value. You can also use  to change the degree of transparency.
NOTE
If you select [More Colors] in [Line Color], [Color] is displayed and you can set a color that is not listed in [Line Color].
Properties can also be set from ribbon commands or tool buttons. For information on the commands and tool buttons that can set properties, see the following.
Lists of Ribbon Commands/Tool Buttons
5.
Click on the Work Window outside the strikethrough you inserted to deselect the strikethrough.
23X1-0R2