<System Management Settings>
All the settings related to System Management Settings are listed with descriptions. Default settings are marked with a dagger (
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_dagger.gif)
).
|
Asterisks (*)
Settings marked with "*1" may be unavailable or vary or have different defaults depending on your country or region.
Settings marked with "*2" may not be displayed depending on the model you are using.
|
<Network Settings>
<System Manager Information Settings>
Specify the PIN exclusively for Administrators who have access privileges to <Network Settings> and <System Management Settings>. You can set the PIN from <System Manager PIN>. You can also register the name of an Administrator.
Setting the System Manager PIN
<System Manager PIN>
Enter a number for the System Manager PIN.
<System Manager Name>
Enter alphanumeric characters for the name of an Administrator.
<Device Information Settings> ![](./images/global_images/1T0002134966/g_ne_toggle_open.gif)
Enter alphanumeric characters for the name and the installation location to identify the machine.
<Menu>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
<System Management Settings>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
<Device Information Settings>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
Select <Device Name> or <Location>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
Enter the device name or location (
Entering Text)
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
<Apply>
<Security Settings>
Enable or disable settings for IP address packet filtering.
<Use TLS>
Select whether to use the TLS encrypted communication.
Configuring the Key and Certificate for TLS
<Off> ![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_dagger.gif) <On>
|
<IPv4 Address Filter> ![](./images/global_images/1T0002134966/g_ne_toggle_open.gif)
Enable or disable settings for filtering packets received from devices with specified IPv4 addresses.
Specifying IP Addresses for Firewall Settings
<Inbound Filter>
<Off> ![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_dagger.gif)
<On>
|
<Menu>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
<System Management Settings>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
<Security Settings>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
<IPv4 Address Filter>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
<Inbound Filter>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
Select <Off> or <On>
<IPv6 Address Filter> ![](./images/global_images/1T0002134966/g_ne_toggle_open.gif)
Enable or disable settings for filtering packets received from devices with specified IPv6 addresses.
Specifying IP Addresses for Firewall Settings
<Inbound Filter>
<Off> ![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_dagger.gif)
<On>
|
<Menu>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
<System Management Settings>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
<Security Settings>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
<IPv6 Address Filter>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
<Inbound Filter>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
Select <Off> or <On>
<MAC Address Filter> ![](./images/global_images/1T0002134966/g_ne_toggle_open.gif)
Enable or disable settings for filtering packets received from devices with specified MAC addresses.
Specifying MAC Addresses for Firewall Settings
<Inbound Filter>
<Off> ![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_dagger.gif)
<On>
|
<Menu>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
<System Management Settings>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
<Security Settings>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
<MAC Address Filter>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
<Inbound Filter>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
Select <Off> or <On>
<Select Country/Region> *1![](./images/global_images/1T0002134966/g_ne_toggle_open.gif)
Specify the country or region where the machine is used. The default setting may vary depending on the setting selected at initial power-on.
<Hong Kong (HK)>
<Singapore (SG)> ![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_dagger.gif)
<Australia (AU)>
<New Zealand (NZ)>
<Malaysia (MY)>
<Vietnam (VN)>
<Argentina (AR)>
<Thailand (TH)>
<India (IN)>
<Philippines (PH)>
<Other>
<Other (Asia)>
<Other (Latin America)>
|
<Menu>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
<System Management Settings>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
<Select Country/Region>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
Select a country or region
<Remote UI Settings>
Configure settings for using the Remote UI. Using the Remote UI allows you to configure machine settings from a Web browser.
<Use Remote UI>![](./images/global_images/1T0002134966/g_ne_toggle_open.gif)
Select whether to use the Remote UI.
Disabling Remote UI
<Off>
<On> ![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_dagger.gif)
|
<Menu>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
<System Management Settings>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
<Remote UI Settings>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
<Use Remote UI>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
Select <Off> or <On>
<Remote UI Access Security Settings>![](./images/global_images/1T0002134966/g_ne_toggle_open.gif)
Specify so that entry of a PIN is required for access to the Remote UI. Set a PIN of up to 7 digits. All users use a common PIN.
Setting a Remote UI PIN
<Off>![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_dagger.gif)
<On>
<Remote UI Access PIN>
|
<Menu>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
<System Management Settings>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
<Remote UI Settings>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
<Remote UI Access Security Settings>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
<On>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
Enter a PIN
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
<Apply>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
Enter the PIN (Confirm)
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
<Apply>
<Display Job Log> ![](./images/global_images/1T0002134966/g_ne_toggle_open.gif)
Select whether to display printing logs on the machine display.
<Off>
<On> ![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_dagger.gif)
|
<Menu>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
<System Management Settings>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
<Display Job Log>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
Select <Off> or <On>
<Use as USB Device>
<Off>
<On> ![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_dagger.gif)
|
<Enable Product Extended Survey Program> ![](./images/global_images/1T0002134966/g_ne_toggle_open.gif)
Enable or disable the Product Extended Survey Program (a program for the machine usage survey).
<Off>
<On> ![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_dagger.gif)
|
<Menu>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
<System Management Settings>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
<Enable Product Extended Survey Program>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
Select <Off> or <On>
<Displ. Consmbls. Info (RUI/Toner Status)> ![](./images/global_images/1T0002134966/g_ne_toggle_open.gif)
Set whether to display a button in the Remote UI or Toner Status for accessing the Web site for purchasing toner cartridges, etc. Also set whether to use Toner Status.
<Displ. Consumables Purchase Button (RUI)>
<Off>
<On> ![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_dagger.gif)
<Toner Status Settings>
<Off>
<On> ![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_dagger.gif)
<Displ. Purchase Button>
<Off>
<On> ![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_dagger.gif)
|
<Menu>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
<System Management Settings>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
<Displ. Consmbls. Info (RUI/Toner Status)>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
Specify the settings
<Displ. Consumables Purchase Button (RUI)>
Select <Off> to prevent a button that accesses sites for purchasing toner cartridges, etc. from being displayed in the Remote UI.
<Toner Status Settings>
If you do not want to use Toner Status, select <Off>. To prevent a button that accesses sites for purchasing toner cartridges, etc. from being displayed in Toner Status, select <On> and then <Off>.
<Google Cloud Print Settings>
<Enable Google Cloud Print>
<Off>
<On> ![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_dagger.gif)
<Google Cloud Print Registration Status>
|
<PDL Selection (Plug and Play)>![](./images/global_images/1T0002134966/g_ne_toggle_open.gif)
Select a page description language so that the machine is detected as a printer that is compatible with that language when it is connected to a computer by using Plug and Play.
<Network>
Select a page description language so that the machine is detected as a printer that is compatible with that language when it is detected over the network.
<UFRII LT> ![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_dagger.gif)
<UFRII LT (V4)>
<PCL6>*2
<PCL6 (V4)>*2
|
<USB>
Select a page description language so that the machine is detected as a printer that is compatible with that language when it is connected to a computer via USB.
<UFRII LT> ![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_dagger.gif)
<UFRII LT (V4)>
<PCL6>*2
<PCL6 (V4)>*2
|
<Menu>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
<System Management Settings>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
<PDL Selection (Plug and Play)>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
Select <Network> or <USB>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
Select a page description language
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
Restart the machine
<UFRII LT>
Detects and connects the machine as a UFRII LT printer.
<UFRII LT (V4)>
Detects and connects the machine as a UFRII LT printer that is compatible with XML Paper Specification (XPS).
<PCL6>
Detects and connects the machine as a PCL6 printer.
<PCL6 (V4)>
Detects and connects the machine as a PCL6 printer that is compatible with XML Paper Specification (XPS).
<Update Firmware>
Select how to install the firmware update according to the environment of the machine.
Updating the Firmware
<Via PC>
<Via Internet>
<Version Information>
|
<Initialize Eco Report Counter>
<Initialize Menu>
Select to restore the settings listed below to the factory defaults. You can restore all the settings listed below at once, or you can restore individual settings separately.
Initializing Menu
<Preferences>
<Timer Settings>
<Common Settings> <Printer Settings> <Adjustment/Maintenance> <System Management Settings> <Initialize All>
|
<Initialize All Data/Settings>