Viewing Network Settings
|
The IP address is not correctly configured if it is displayed as "0.0.0.0".
Connecting the machine to a switching hub or bridge may result in a connection failure even when the IP address is correctly configured. This problem can be solved by setting a certain interval before the machine starts communicating. Setting a Wait Time for Connecting to a Network
|
Viewing IPv4 Settings
<Status Monitor>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
<Network Information>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
<IPv4>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
Select the setting to view
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
Check the settings
Viewing IPv6 Settings
<Status Monitor>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
<Network Information>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
<IPv6>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
Select the setting to view
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
Check the settings
Viewing Direct Connection Information
<Status Monitor>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
<Network Information>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
<Direct Connection Information>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
<Connection Details>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
Check the settings
Viewing the MAC Address for Wired LAN
1
Select <Menu> in the Home screen.
Home Screen
2
Select <Network Settings>.
3
Select <Ethernet Driver Settings>.
MAC address is displayed.
Viewing the MAC Address and Information for Wireless LAN
1
Select <Menu> in the Home screen.
Home Screen
2
Select <Network Settings>.
3
Select <Wireless LAN Settings>.
4
Read the message that is displayed, and select <OK>.
5
Select <Wireless LAN Information>.
6
Select the setting to view.
Viewing security information
To view WEP and WPA/WPA2-PSK information, use the following procedure.
<Security Settings>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
Select the displayed security protocol
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
Select the setting to view
Viewing from the <Status Monitor> screen
<Wireless LAN Status> and <Latest Error Information> can be viewed from <Status Monitor>.
<Status Monitor>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
<Network Information>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
<Network Connection Method>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
<Connection Information>
![](./images/book_images/pubnumbers/USRMA-2801-zz-SS-enUV/b_key_arrow_right.gif)
Select the setting to view
LINKS