|
You can recall the destinations specified in the past. When you specify a previously used destination, the machine also sets the same fax settings such as density you used the last time you sent documents to that destination.
|
When <Restrict Resending from Log> is set to <On>, you cannot use this feature. Disabling Use of Previously Used Destinations
Turning OFF the machine or setting <Restrict New Destinations> to <On> deletes the past destinations, and disables this feature. Restricting New Destinations that Can Be Specified
The destinations in Manual Sending are not available for this feature. Sending a Fax after a Phone Call (Manual Sending)
|
When you specify a destination using this feature, any destinations that you have already specified are deleted.
|
1
|
Select <Confirm Destination>.
|
2
|
Select the check box for the destination to be deleted, and select <Remove from Dest.>.
If you select the Group Dial check box, you can view the destinations registered in the group by selecting <Details> <Destination>.
|
3
|
Select <Yes>.
|
1
|
Select the original size.
When there is only one page to be scanned, proceed to step 3.
|
2
|
Place the next original on the platen glass, and select <Scan Next>.
Repeat this step until you finish scanning all of the pages.
|
3
|
Select <Start Sending>.
The faxes are sent.
|