If the screen shown above is not displayed when paper is loadedIf you always load the same paper in the multi-purpose tray, you can skip the paper setting operations by registering the paper size and type as the default setting. When the default setting is registered, however, the screen shown above is not displayed. To display the screen, select <Specify When Loading Paper> (Registering Default Paper Settings for the Multi-Purpose Tray).
|
1
|
Select <Custom>.
|
2
|
Specify the length of the <X> side and <Y> side.
Touch panel model
Select <X> or <Y>, and enter the length of each side using the numeric keys.
If you register the paper size you use frequently on buttons <S1> to <S3>, you can call them up with one touch. Registering a Custom Paper Size
Black and white LCD model
Execute the following steps in sequence: <X> enter the paper width <Y> enter the paper length
|
3
|
Select <Apply>.
|