Procedure for Setting to Send E-Mail
Before configuring the machine for scanning to e-mail, check the setup flow shown below.
 |  | Make sure that the machine and the computer are correctly connected. | ||
 | ||||
 |  | Make sure that you have the following information: The IP address of the machine. Viewing Network Settings An e-mail address to be registered as a destination. Information about the e-mail server, including the SMTP server name, port numbers, whether authentication is required, and the user name and password for authentication.  For more information about the e-mail server settings, contact your Internet service provider or Network Administrator. | ||
| ||||
 |  | Make sure that the computer meets the system requirements for the Send Function Setting Tool (sending e-mail). System requirements for the Send Function Setting Tool System Environment Also make sure that <Use HTTP> and <Use Remote UI> are set to <On>. Disabling HTTP Communication Disabling Remote UI | ||
| ||||
 |  | Set the machine configuration. Configuring Basic E-Mail Settings Configuring Basic E-Mail Settings Configuring Detailed E-Mail Communication Settings (Authentication, Encryption, etc.) Configuring E-Mail Communication Settings |