<Adjustment/Maintenance>
All the settings related to adjustment and maintenance are listed with descriptions. Default settings are marked with a dagger (
).
).|
|
Asterisks (*)Settings marked with an asterisk (*) may not be displayed depending on the model you are using.
|
<Displ. Timing for Cartridge Prep. Notif.> 
Set the display timing for the message notifying you that the amount remaining in the toner cartridge or the drum cartridge is low.
|
<Toner Cartridge>
<Drum Cartridge>
|
<Menu> (
) 
<Adjustment/Maintenance> <Displ. Timing for Cartridge Prep. Notif.> Select <Toner Cartridge> or <Drum Cartridge> Enter the cartridge level <Apply> (
)
) <Adjustment/Maintenance> <Displ. Timing for Cartridge Prep. Notif.> Select <Toner Cartridge> or <Drum Cartridge> Enter the cartridge level <Apply> ()<Toner Save>
Select whether to reduce toner consumption when copying or faxing.
|
<Copy>
<Off>
<On>
<Fax>*
<Off>
<On>
|
<Menu> () <Adjustment/Maintenance> <Toner Save> Select <Copy> or <Fax> <On>
) <Adjustment/Maintenance> <Toner Save> Select <Copy> or <Fax> <On>
When set to <On>
Fine lines and portions with lighter print density may become blurred.
<Special Processing>
If the print results on special types of paper are not satisfactory, the following settings may improve the quality of the printouts.
<Special Printing Mode U>
Sometimes toner appears splattered around text or patterns in a printout. In such cases, setting this to <On> may improve the quality of the printout.
|
<Off>
<On> |
<Menu> () <Adjustment/Maintenance> <Special Processing> <Special Printing Mode U> <On>
) <Adjustment/Maintenance> <Special Processing> <Special Printing Mode U> <On>
 |
|
Setting this to <On> may affect the print quality for some types of paper (especially for lightweight paper) or in some printing environments (especially in high humidity environments).
When you set this to <On>, <Special Printing Mode Q>, <Special Printing Mode R>, and <Special Printing Mode T> are set to <Off> automatically.
|
<Special Printing Mode D>
Set this item when the printed paper turns out grayish or printing is faded.
|
<Off>
<On> |
<Menu> () <Adjustment/Maintenance> <Special Processing> <Special Printing Mode D> <On>
) <Adjustment/Maintenance> <Special Processing> <Special Printing Mode D> <On><Special Printing Mode A>
If streaks adhere to the print paper, changing this may improve the print quality. <Mode 2> can improve the quality more significantly than <Mode 1>.
|
<Off>
<Mode 1> <Mode 2> |
<Menu> () <Adjustment/Maintenance> <Special Processing> <Special Printing Mode A> Select the mode
) <Adjustment/Maintenance> <Special Processing> <Special Printing Mode A> Select the mode<Special Printing Mode Z>
If streaks adhere to the print paper output when copying or faxing, changing this may improve the print quality. <Mode 2> can improve the quality more significantly than <Mode 1>.
Touch Panel Model
|
<Copy>
<Off>
<Mode 1>
<Mode 2>
<Fax>
<Off>
<Mode 1>
<Mode 2>
|
5 Lines LCD Model
|
<Off>
<Mode 1> <Mode 2> |
Touch Panel Model
<Menu> <Adjustment/Maintenance> <Special Processing> <Special Printing Mode Z> Select <Copy> or <Fax> Select the mode
<Adjustment/Maintenance> <Special Processing> <Special Printing Mode Z> Select <Copy> or <Fax> Select the mode5 Lines LCD Model
<Adjustment/Maintenance> <Special Processing> <Special Printing Mode Z> Select the mode<Special Printing Mode G>
Printed images may fade or streaks may appear when the paper has a lot of paper dust. In such cases, setting this to <On> may improve the quality of the printout.
|
<Off>
<On> |
<Menu> () <Adjustment/Maintenance> <Special Processing> <Special Printing Mode G> <On>
) <Adjustment/Maintenance> <Special Processing> <Special Printing Mode G> <On><Special Printing Mode Q>
Printed images may be faint when they are printed on rough-surface paper. In such cases, setting this to <On> may improve the quality of the printout.
|
<Off>
<On> |
<Menu> () <Adjustment/Maintenance> <Special Processing> <Special Printing Mode Q> <On>
) <Adjustment/Maintenance> <Special Processing> <Special Printing Mode Q> <On>|
|
|
Setting this to <On> may affect the image quality.
When you set this to <On>, <Special Printing Mode U>, <Special Printing Mode R>, and <Special Printing Mode T> are set to <Off> automatically.
|
<Special Printing Mode R>
Printing may be faint when you print on the back of a printed sheet. In such cases, setting this to <On> may improve the quality of the printout.
|
<Off>
<On> |
<Menu> () <Adjustment/Maintenance> <Special Processing> <Special Printing Mode R> <On>
) <Adjustment/Maintenance> <Special Processing> <Special Printing Mode R> <On>|
|
|
If you set to <On>, image quality may be affected or a paper jam may occur when a certain length of time elapses after printing on the front side or depending on the ambient humidity.
When you set this to <On>, <Special Printing Mode U>, <Special Printing Mode Q>, and <Special Printing Mode T> are set to <Off> automatically.
|
<Special Printing Mode T>
Printing may be uneven when you print in a high-humidity environment. In such cases, setting this to <On> may improve the quality of the printout.
|
<Off>
<On> |
<Menu> () <Adjustment/Maintenance> <Special Processing> <Special Printing Mode T> <On>
) <Adjustment/Maintenance> <Special Processing> <Special Printing Mode T> <On>|
|
|
Printed images or text may be blurred when you set this to <On> and print in a low-humidity environment.
When you set this to <On>, <Special Printing Mode U>, <Special Printing Mode Q>, and <Special Printing Mode R> are set to <Off> automatically.
|
<Special Printing Mode L>
Smudges may appear in a printout when the paper has a lot of paper dust or other dust particles. In such cases, setting this to <On> may improve the quality of the printout.
|
<Off>
<On> |
<Menu> () <Adjustment/Maintenance> <Special Processing> <Special Printing Mode L> <On>
) <Adjustment/Maintenance> <Special Processing> <Special Printing Mode L> <On><Select Line Width>
If a printed barcode cannot be read, changing this may resolve the problem.
|
<Auto>
<Thin> <Slightly Thin> <Slightly Thick> <Thick> |
<Menu> () <Adjustment/Maintenance> <Special Processing> <Select Line Width> Select the line width
) <Adjustment/Maintenance> <Special Processing> <Select Line Width> Select the line width<Clean Fixing Assembly>
Clean the fixing assembly after the toner cartridge or the drum cartridge is replaced or if black streaks appear on printouts. Cleaning the Fixing Assembly
<Control Condensation> *
Restrict fax and print operation while removing condensation that has formed due to changes in the environment.
|
<Off>
<On> <Use Fax Memory Lock>
<Use Fax Mem. Lock+Do Not Allow Job Print>
|
<Menu> <Adjustment/Maintenance> <Control Condensation> <On> <OK> Select <Use Fax Memory Lock> or <Use Fax Mem. Lock+Do Not Allow Job Print> <Yes>
<Adjustment/Maintenance> <Control Condensation> <On> <OK> Select <Use Fax Memory Lock> or <Use Fax Mem. Lock+Do Not Allow Job Print> <Yes> |
|
|
While condensation is being removed, blurred images may be printed and print density may decrease.
When the machine is removing condensation, it does not enter sleep mode.
|