Recalling Previously Used Settings for Sending/Saving (Recall Settings)
 |
|
You can select a destination from among the past destinations. When you specify a previously used destination, the machine also sets the same scan settings such as density you used the last time you sent documents to that destination.
|
 |
|
When <Restrict Resending from Log> is set to <On>, you cannot use this feature. Disabling Use of Previously Used Destinations
Turning OFF the machine or setting <Restrict New Destinations> to <On> deletes the past destinations, and disables this feature. Restricting New Destinations that Can Be Specified
|
 |
|
When you specify a destination using this feature, any destinations that you have already specified are deleted.
|
1
Place the original(s). Placing Originals
2
Select <Scan> in the Home screen. Home Screen
3
Select <E-Mail> or <File>.
4
Select <Destination> 
<Recall Set.>.
<Recall Set.>.5
Select the destination.
When you transmit to multiple destinations, only the address specified for the first transmission is displayed in the log, but all the destinations are specified.
The selected destination and its scan settings are specified. You can also change the settings before sending.
To delete destinations (e-mail)
If you specified multiple destinations, you can delete destinations as necessary.
|
1
|
Select <Destination>
<Confirm/Edit>. |
|
2
|
Select a destination you want to delete.
If you specified Group Dial, "XX destination(s)" is displayed. Selecting <Number of Destinations> displays destinations registered in the group.
|
|
3
|
Select <Remove>
<Yes>. |
6
Press 
.
.Scanning of the original starts.
If you want to cancel, select <Cancel> <Yes>. Canceling Sending Documents
<Yes>. Canceling Sending DocumentsWhen placing originals in the feeder in step 1
When scanning is complete, the sending/saving process starts.
When placing originals on the platen glass in step 1
When scanning is complete, follow the procedure below (except if you selected JPEG as a file format).
|
1
|
If there are additional pages of originals to be scanned, place the next original on the platen glass, and press
.Repeat this step until you finish scanning all of the pages.
When there is only one page to be scanned, proceed to the next step.
|
|
2
|
Select <Start TX>.
The sending/saving process starts.
|