Viewing Network Settings

NOTE
The IP address is not correctly configured if it is displayed as "0.0.0.0".
Connecting the machine to a switching hub or bridge may result in a connection failure even when the IP address is correctly configured. This problem can be solved by setting a certain interval before the machine starts communicating. Setting a Wait Time for Connecting to a Network
You can print a list of the current network settings. System Manager Data List

Viewing IPv4 Settings

 (Status Monitor) <Network Information>    <IPv4>    Select the setting to view  

Viewing IPv6 Settings

 (Status Monitor) <Network Information>    <IPv6>    Select the setting to view  

Viewing the MAC Address

1
Press .
2
Use / to select <Network Settings>, and press .
If the logon screen appears, enter the correct ID and PIN using the numeric keys, and then press . Logging on to the Machine
3
Select <Ethernet Driver Settings>, and press .
3C0J-06K