Watermark Printing

This mode enables you to print watermark on copies you select. You can also add user-defined text to the watermark.

Press

(Main Menu) → [Copy].

Press [Options] → [Watermark].

Set the image orientation and print position.

Orientation:

[Upright Image]:	Press this if you are placing originals upright.
[Sideways Image]:	Press this if you are placing originals sideways.

Upright Image		Sideways Image

Vertical Placement	Horizontal Placement	Vertical Placement	Horizontal Placement

If you select [Center] for the print position, the watermark is printed on the center of the paper.

NOTE
If you set any two of [Page Numbering], [Copy Set Numbering], or [Print Date] to print in the same position, a confirmation message appears when you press (Start).

You can press [Set Details] to adjust the printing position.

To adjust the printing position, press [X] or [Y] → adjust the printing position with [-] or [+] → press [OK].

To set the printing position for the back side when performing two-sided copying, select [Opposite to Front Side] or [Same as Front Side] → press [OK].

Specify the print settings for the watermark.

Press the <Size> drop-down list → select the size of the watermark.

Select the size of the watermark from [10.5 pt], [12.0 pt], [14.0 pt], [24.0 pt], [36.0 pt], [54.0 pt], and [72.0 pt].

Press the <Color> drop-down list → select the color of the watermarks.

Press the <Watermark Type> drop-down list → select the type of watermark.

If you select [Custom], press [Enter] and enter the custom text → press [OK] → [OK].

IMPORTANT
Text that you enter in [Custom] is not automatically saved. If you want to register text to be selected with watermarks whenever necessary, press [Register] → enter the text to be registered.

NOTE
You can also select text that has been registered in [Register Characters for Page No./Watermark]. (See "Registering/Editing/Deleting User-Defined Text for Page Numbers and Watermarks.")

To specify detailed watermark settings, press [Set Details].

If you do not want to specify other settings, proceed to step 6.

Setting the pages to print the watermark:

Setting the print type:

Setting the pages to print the watermark:

Press [Pages to Print].

Select the pages to print the watermark → press [OK] → [OK].

Setting the print type:

Press [Print Type].

Select the print type → press [OK] → [OK].

If you select [Transparent], press [Light] or [Dark] to adjust the halftone density.

Press [OK] → [Close].

IMPORTANT
Printing performance may not be optimal, depending on the original content and combination of settings. If you use [Watermark] with [Add Cover] or [Insert Sheets], numbers will not be printed on the inserted pages.