Loading Pre-Punched Paper

You can load pre-punched paper to the following paper source:

Paper drawers of the main unit

Stack Bypass-C

POD Deck Lite-C / POD Deck Lite XL-A

Multi-drawer Paper Deck-C

Document Insertion Unit-N

When loading pre-punched paper, take note of the orientation of the binding holes and the image.

When pre-punched paper is loaded in the paper drawer of the main unit, the side facing down is the one printed on.

When pre-punched paper is loaded in the Stack Bypass-C, POD Deck Lite-C / POD Deck Lite XL-A, or Multi-drawer Paper Deck-C, the side facing up is the one printed on.

IMPORTANT
If you are making one-sided prints, select [Face Up (Reverse Order)] in [Face Up/Face Down]. (See "Collating Copies.") If you want to output prints with the printed face down, select plain paper with horizontal (landscape) orientation in [Select Paper]. (See "Paper Selection.")