Available Paper Stock

The paper types that can be used with this machine are shown in the following table. Icons indicating the type of paper loaded in each paper drawer can be displayed on the paper selection screen if you store that information in the machine beforehand. (See "Registering the Paper Size and Type for a Paper Source.")
IMPORTANT
For high-quality copies and printouts, use paper that is recommended for this machine. Using other types of paper may cause problems such as paper jams.
If you use the type of paper that is not recommended for this machine, contact your local authorized Canon dealer.
You can use various types of paper for this machine, however, you may not be able to get the sufficient image quality and paper feeding depending on the paper characteristics (stiffness, thickness, air permeability, smoothness, moisture absorbency, etc.). For the paper thickness, please use plain paper whose thickness is 360 micrometer or less as a reference.
: Available -: Unavailable
Paper Type
Paper Source
Paper Drawer
Stack Bypass-C
POD Deck Lite-C
POD Deck Lite XL-A
Multi-drawer Paper Deck-C
Document Insertion Unit-N
Thin 2
(52 g/m2 to 63 g/m2)
*6
Thin 1
(64 g/m2 to 79 g/m2)
Plain 1
(80 g/m2 to 90 g/m2)
Plain 2
(91 g/m2 to 105 g/m2)
Recycled 1
(64 g/m2 to 79 g/m2)
Recycled 2
(80 g/m2 to 90 g/m2)
Recycled 3
(91 g/m2 to 105 g/m2)
Color 1
(64 g/m2 to 79 g/m2)
Color 2
(80 g/m2 to 90 g/m2)
Heavy 1
(106 g/m2 to 128 g/m2)
Heavy 2
(129 g/m2 to 150 g/m2)
Heavy 3
(151 g/m2 to 180 g/m2)
Heavy 4
(181 g/m2 to 220 g/m2)
Heavy 5
(221 g/m2 to 256 g/m2)
Heavy 6
(257 g/m2 to 300 g/m2)
Heavy 7
(301 g/m2 to 325 g/m2)
-
*7
-
Heavy 8
(326 g/m2 to 350 g/m2)
-
*7
-
1-Sided Coated Thin 2
(85 g/m2 to 90 g/m2)
-
*8,*9,*10
*8,*9,*10
*8
1-Sided Coated Thin 1
(91 g/m2 to 105 g/m2)
-
*8,*11
*8,*11
*8
1-Sided Coated 1
(106 g/m2 to 128 g/m2)
-
1-Sided Coated 2
(129 g/m2 to 150 g/m2)
-
1-Sided Coated 3
(151 g/m2 to 180 g/m2)
-
1-Sided Coated 4
(181 g/m2 to 220 g/m2)
-
1-Sided Coated 5
(221 g/m2 to 256 g/m2)
-
1-Sided Coated 6
(257 g/m2 to 300 g/m2)
-
1-Sided Coated 7
(301 g/m2 to 325 g/m2)
-
*7
-
1-Sided Coated 8
(326 g/m2 to 350 g/m2)
-
*7
-
2-Sided Coated Thin 2
(85 g/m2 to 90 g/m2)
-
*8,*9,*10
*8,*9,*10
*8
2-Sided Coated Thin 1
(91 g/m2 to 105 g/m2)
-
*8,*11
*8,*11
*8
2-Sided Coated 1
(106 g/m2 to 128 g/m2)
-
2-Sided Coated 2
(129 g/m2 to 150 g/m2)
-
2-Sided Coated 3
(151 g/m2 to 180 g/m2)
-
2-Sided Coated 4
(181 g/m2 to 220 g/m2)
-
2-Sided Coated 5
(221 g/m2 to 256 g/m2)
-
2-Sided Coated 6
(257 g/m2 to 300 g/m2)
-
2-Sided Coated 7
(301 g/m2 to 325 g/m2)
-
*7
-
2-Sided Coated 8
(326 g/m2 to 350 g/m2)
-
*7
-
Matte Coated Thin 2
(85 g/m2 to 90 g/m2)
-
*8
*8
Matte Coated Thin 1
(91 g/m2 to 105 g/m2)
-
*8
*8
Matte Coated 1
(106 g/m2 to 128 g/m2)
-
Matte Coated 2
(129 g/m2 to 150 g/m2)
-
Matte Coated 3
(151 g/m2 to 180 g/m2)
-
Matte Coated 4
(181 g/m2 to 220 g/m2)
-
Matte Coated 5
(221 g/m2 to 256 g/m2)
-
Matte Coated 6
(257 g/m2 to 300 g/m2)
-
Matte Coated 7
(301 g/m2 to 325 g/m2)
-
*7
-
Matte Coated 8
(326 g/m2 to 350 g/m2)
-
*7
-
Textured 1
(80 g/m2 to 90 g/m2)
-
Textured 2
(91 g/m2 to 105 g/m2)
-
Textured 3
(106 g/m2 to 128 g/m2)
-
Textured 4
(129 g/m2 to 150 g/m2)
-
Textured 5
(151 g/m2 to 180 g/m2)
-
Textured 6
(181 g/m2 to 220 g/m2)
-
Textured 7
(221 g/m2 to 256 g/m2)
-
Textured 8
(257 g/m2 to 300 g/m2)
-
Vellum 1*1
(64 g/m2 to 79 g/m2)
Vellum 2*1
(80 g/m2 to 90 g/m2)
Vellum 3*1
(91 g/m2 to 105 g/m2)
Transparency*2
(151 g/m2 to 180 g/m2)
*5
-
Clear Film
(151 g/m2 to 180 g/m2)
-
Pre-Punched 1
(64 g/m2 to 79 g/m2)
Pre-Punched 2
(80 g/m2 to 90 g/m2)
Tab 1
(151 g/m2 to 180 g/m2)
*3
*6
Tab 2
(181 g/m2 to 220 g/m2)
*3
*6
Labels
(151 g/m2 to 180 g/m2)
-
-
Bond 1
(64 g/m2 to 79 g/m2)
Bond 2
(80 g/m2 to 90 g/m2)
Bond 3
(91 g/m2 to 105 g/m2)
Letterhead
(151 g/m2 to 180 g/m2)
Envelope
(181 g/m2 to 220 g/m2)
*4
*5
*5
-
-
*1 Some types of vellums cannot be used.
*2 Use only A4 or A4R transparencies recommended for this machine.
*3 The Tab Feeding Attachment-F is required.
*4 The Envelope Feeder Attachment-F is required, except when using ISO-C5 or Kakugata 2.
*5 The Envelope Feeder Attachment-G is required.
*6 Long sheet cannot be used even when the Long Sheet Tray-B is attached.
*7 If you use paper types heavier than 300 g/m2 on the Multi-drawer Paper Deck, the productivity may be decreased.
*8 If coated thin paper is used for printing, it may become creased depending on the latest print jobs. In that case, keep the paper deck open for about 10 minutes to lower the temperature of the paper deck, and then start printing again.
*9 Long sheet cannot be used.
*10 Basis weight less than 84 g/m2 cannot be used.
*11 Long sheet less than 100 g/m2 in weight cannot be used.
: Available -: Unavailable
Paper Size
Width x Length
Paper Source
Paper Drawer
Stack Bypass-C
POD Deck Lite-C
POD Deck Lite XL-A
Multi-drawer Paper Deck-C
Document Insertion Unit-N
-
330 mm x 483 mm
-
305 mm x 457 mm
SRA3
320 mm x 450 mm
A3
297 mm x 420 mm
A4
297 mm x 210 mm
A4R
210 mm x 297 mm
A5R
148 mm x 210 mm
-
B4
257 mm x 364 mm
B5
257 mm x 182 mm
B5R
182 mm x 257 mm
Custom Size
98.4 mm x 148 mm to 330.2 mm x 487.7 mm
*1
*1
*2
*3
Custom Size
210 mm x 487.8 mm to 330.2 mm x 1,300 mm
-
*6
-
*7
-
-
Envelope
ISO-C5
162 mm x 229 mm
-
No. 10(COM10)
104.7 mm x 241.3 mm
-
-
Monarch
98.4 mm x 190.5 mm
-
-
DL
110 mm x 220 mm
-
-
Nagagata 3
120 mm x 235 mm
-
-
Yougatanaga 3
120 mm x 235 mm
-
-
Kakugata 2
240 mm x 332 mm
-
-
Custom Size
6"x9", 9"x12", 10"x13"
*4
*4
*5
*5
-
-
*1 Custom paper sizes can only be fed if they are between 139.7 mm x 148 mm to 330.2 mm x 487.7 mm.
*2 Custom paper sizes can only be fed if they are between 139.7 mm x 182 mm to 330.2 mm x 487.7 mm.
*3 Custom paper sizes can only be fed if they are between 182 mm x 182 mm to 330.2 mm x 487.7 mm.
*4 Envelopes whose size is between 98.4 mm x 148 mm to 330.2 mm x 487.7 mm can also be fed, however, image may not be printed correctly on the envelopes.
*5 Envelopes whose size is between 139.7 mm x 148 mm to 330.2 mm x 487.7 mm can also be fed, however, image may not be printed correctly on the envelopes.
*6 When the Long Sheet Tray-B is attached. For one-sided printing, you can load paper sizes between 210 mm x 487.8 mm to 330.2 mm x 1,300 mm. For two-sided printing, you can load paper sizes between 210 mm x 487.8 mm to 330.2 mm x 762 mm.
*7 Custom paper sizes can only be fed if they are between 210 mm x 487.8 mm to 330.2 mm x 762 mm.
IMPORTANT
If you are using pre-printed paper, bordered paper, or color paper, and the printed image is misaligned vertically as seen from the paper feeding direction, set to 'Off' for <Auto Adjust Left/Right Edge Alignment> in [Paper Settings] in [Preferences] (Settings/Registration). (See "Changing the Auto Adjust Left/Right Edge Alignment.")
Use paper soon after it is unpacked as the moisture absorption condition of paper may affect the image quality and paper feeding. Wrap any remaining paper in its original package and store it on a flat surface.
When the High Capacity Stacker is attached, the minimum paper size that can be fed in the machine is 140 x 182 mm (including the envelopes). Also, the envelopes cannot be stacked on the High Capacity Stacker.
NOTE
For instructions on loading paper, see the following sections:
"Loading Paper into a Paper Drawer" for paper drawers
"Loading Paper into the Stack Bypass-C" for the Stack Bypass-C
"Loading Paper into the Long Sheet Tray-B (Optional)" for the Long Sheet Tray-B
"Loading Paper into the POD Deck Lite-C (Optional)" for the POD Deck Lite-C
"Loading Paper into the Multi-drawer Paper Deck-C (Optional)" for the Multi-drawer Paper Deck-C
"Loading Paper into the POD Deck Lite XL-A (Optional)." for the POD Deck Lite XL-A
"Loading Paper into the Document Insertion Unit-N (Optional)" for the Document Insertion Unit-N
The Stack Bypass-C, POD Deck Lite-C, Multi-drawer Paper Deck-C, and Document Insertion Unit-N are optional.
Chlorine-free paper can be used with this machine.
The printed envelopes may be creased depending on how envelope is pasted together or the position of the flap.

Storing Printouts

When handling or storing paper printed by this machine, be careful of the following points.

How to store printouts

Store paper on a flat surface.
Avoid storing printouts in folders made of PVC material, as this may cause the toner to melt and stick to the PVC material. Toner may peel when printouts are folded or creased.
Store printouts in the condition where they are not folded or creased as toner may peel.
Put printouts in a binder when storing for a long period of time (two years or longer).
Printouts may discolor when stored for a long period of time.
Avoid storing printouts in a location subject to high temperatures.

Precautions when sticking printouts with adhesive

Be sure to use insoluble adhesive.
Test the adhesive on an unneeded printout before using.
Before stacking printouts that stuck with adhesive, check that the adhesive completely dried.
3U19-01J