<Maintenance>
The cleaning functions are listed with descriptions. Default settings are marked with a dagger (
).
). |
Asterisks (*)Settings marked with an asterisk (*) may not be displayed depending on the model you are using, options, or other setting items. |
<Clean Fixing Assembly (Reduce Paper Back Side Stain)> *
Clean the fixing assembly when the edge or back side of the printout is smudged. Cleaning the Fixing Assembly
<Clean Fixing Assembly>
Clean the fixing assembly after a toner cartridge is replaced or if black streaks appear on printouts. Cleaning the Fixing Assembly
<Clean ITB>
Clean the transfer belt inside the machine to prevent the print quality from deteriorating. Cleaning the Transfer Belt (ITB)
<Clean Feeder> *
Clean the feeder rollers if originals become dirty after being fed through the feeder. Cleaning the Feeder
<Control Condensation>
When the temperature changes rapidly in the environment where the machine is installed, condensation occurs, which may cause fading or bleeding in images and text. Select <On> to remove dew condensation in the machine. When selecting <On>, specify whether to restrict jobs.
<Off> <On> <Use Fax Memory Lock> /<Allow Job Printing During Process><Use Fax Memory Lock + Do Not Allow Job Printing During Process>/<Do Not Allow Job Printing During Process> |
<Menu> 
<Adjustment/Maintenance> <Maintenance> <Control Condensation> <On> Check the message <OK> Select the item <Yes> 
<Adjustment/Maintenance> <Maintenance> <Control Condensation> <On> Check the message <OK> Select the item <Yes>  |
While condensation removal is being performed, printing may not be performed properly and blank paper may be output. If you set to <On>, you need to keep the machine turned ON to maintain the effect of condensation removal. |